!Liberty Travel Trailer  x   >   !CR-V  x   >   Ignik  x   >   Toledo  x   >  

I have the shock absorption shocks on my hydraulic trailer brakes when I come to a stop it does not slam but when I take off its slams hard pulling the slack out of the tongue. I was wondering if thats indication that I do need new shocks on...

I have this same set up on a trailer that we use for work and I believe the shock that is supposed to dampen the slide action when you stop has went out. Im needing to find this shock. yall show one for the 5000 lbs system with a 2 in ball...

Is there a rebuild kit for this brake actuator available? I see the previous guy asked the same question. Im wondering if you guys were able to maybe Source One. Mine is not leaking but I took it apart to clean it out and I feel like it would...

Hello, I purchased a Rettig 16foot tandem axle trailer in a tractor deal and the trailer seems to have some sort of surge brake system. The brakes do not work and I am looking to repair them. The system looks similar to Demco Hydraulic brake...

Belcrank 2in ball hitch can you just replace the hitch arm | I wish we had just the portion of the Belcrank coupler you are looking for but the best solution we have is the Toledo Actuator - 2" Bulldog Coupler # 16006 as a replacement as this...

Im really interested in this Ignik fire pit GN24FR. I have a Class B van. Extra space is valuable so this unit would free up a bit of room. My question has to do with the propane tank. I dont have room for even a five-gallon canister and even...

I have a Balcrank and I need a replacement master cylinder | The Replacement Master Cylinder # 10614 will fit Balcrank T-6 actuators for drum brakes. You will need to reuse your existing mounting hardware. |

For the propane tanks you sell, are they new or previously used? And what is the service life of these tanks? I would not want to buy a tank that is already well into its service life. Thank you. | The propane tanks we sell like the Ignik...

Is there any way to modify a hydraulic drum brake actuator for my trailer? I have a 6,000lb actuator on about a 4,000 trailer. The brakes work, but could use some more power. | I do have an option available for you however, I cannot recommend...

Balcrank 16006 2inch my question is can we convert this to a 2 5/16 ball both are Rated 5000lbs | We have a very similar coupler to the Balcrank 16006 you have that has a 2-5/16 inch ball and is for drum brakes but at this time we do not have...

What is the diameter of your shock # 1844-2? | I went out into our warehouse and measured the diameter of the Replacement Shock Absorber # 1844-2 and found that it measures 1-1/2 inches in diameter. |

replacement actuator shocks | It looks like you are looking for a replacement shock for your actuator. We have several models including # 1844-2. This particular model fits Toledo brand actuators. When fully closed it measures 6-1/4 inches from...

Can you give me the inside and outside diameter of this bushing? Thank You. | Nylon Pivot Bushing # 1745 measures: Inner Diameter: 0.680 inches Outer Diameter of main sleeve: 0.810 inches Outer Diameter of flange: 0.993 inches Total Length:...

Is there a video on replacing the damper? | I have attached a link to a video that shows how the Replacement Shock Absorber, part # 1844-2 is installed. When this shock is collapsed it measures 6-1/4 inches from center of hole to center of...

What size is the eyelet, i.e. bolt size used for this shock absorber. Do you have any other shocks that are similar with a 3 stroke, 7 inch collapse and 10 extended of same style with 7/16 mtg holes? | The bolt holes for the Replacement Shock...

Looking for a shock for my surge brake actuator. On the old shock is says MAECO 19277 and 8D76. it measures eye to eye compressed 7 1/4 and extended 9 1/4. It looks similar to your Item # 1844-2 for Toledo surge brake. Mine says SUR ACT III...

Can I use this hose for my Blackstone 2142 griddle? | Yes, your Blackstone Portable Outdoor Tabletop Griddle BL26FR (also known as part 2142) is designed to match up with a 1-lb disposable cylinder propane tank so the Ignik Propane Adapter Hose...

I need a replacement hose. Is one available? | For your Ignik Gas Growler Deluxe # GN74FR, you can use the: -Ignik Propane Adapter Hose - Type 1 x Disposable Cylinder # GN57FR for a replacement. |

How do they recommend cleaning the cover? | A wet rag should easily clean the Ignik Backside Heated Seat Pad # GN34FR that you referenced. To be on cautious side you should have it unplugged and let it dry before plugging back in. |

Im unclear about the GN87FR cord mentioned on the page. Whats the difference in function between that and the cord thats already included? | The heating pad cord part # GN87FR that you referenced allows the Ignik Backside Heated Seat Pad # GN34FR...

What hitch should I get for my 2023 Ford Ranger? | The Curt Class III hitch part # C13417 is a really great choice for your 2023 Ford Ranger. It has great towing capacities, installs easily, and is made in the USA. If you want to add a 7-way...

Hi, I am looking for a portable fire pit for the fire pit rocks? Do you have that | Yes, we sure do! For your Ignik FireCan Fire Pit Rocks # GN47FR, you can use the Ignik FireCan Portable Fire Pit with 5' Hose - Propane # GN24FR. This is a...

Is the heat output adjustable? Is it thermostatically controlled, or is it just a constant output? | Yes, The Ignik Heated Sleeping Bag Liner # GN77FR has 2 heat modes Instant heat mode which connects directly to the 12V power supply for immediate...

Whats the difference between this and # GN34FR. They look to be the same thing... Thank you. | The only difference between the Ignik Backside Heated Seat Pad with 12V Car Adapter # GN27FR and the Ignik Backside Heated Seat Pad # GN34FR is that...