Replacement Parts for Balcrank 16006 Brake Actuator
Published 12/21/2017 >
Products Featured in This Question
Question:
I think I only may need a new shock and cylinder. I took some more pics. It is a Balcrank product. Can you advise me on the corrects parts. I really appreciate the help.
asked by: JORDAN S
Expert Reply:
To replace your surge brakes there are a few things you'll need to know, the first being if you have drum or disc brakes. You can then choose the correct disc or drum brake assembly; you'll need to know your axle capacity and wheel size for either. You will also need to know your bolt flange pattern and drum size if you have drum brakes.
You will then need the correct brake actuator and a brake line kit, which is going to be different if you have disc or drum brakes. I have added links to help articles which detail what you'll need for both disc and drum brakes, a help article on determining wheel bolt pattern, as well as links to our selection of actuators, brake lines, and brake assemblies for both disc and drum brakes. If you let me know the above information I'd be happy to help you get the correct parts so you can add brakes.
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media





Continue Researching
- Search Results: trailer brakes
- Search Results: wire loom
- Shop: Nylon Bushings - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 4
- Shop: Replacement Pivot Shaft for Toledo or Balcrank Brake Actuator
- Shop: Toledo Actuator - 2-5/16" Bulldog Coupler - 6,000 lbs.
- Shop: Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Video: Breaking Down the Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Search Results: titan model 20
- Shop: etrailer Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - Left/Right - 10" - 3.5K
- Shop: Dexter Hydraulic Trailer Brakes - Uni-Servo - 10" - Left/Right - 3.5K
- Video: Hands-On with the Replacement Shock Absorber for Toledo Brake Actuators
- Video: Review of the Hydraulic Trailer Brake Kit
- Video: Hydraulic Trailer Brake Kit Review
- Video: Breaking Down the Hydraulic Trailer Brake Kit
- Video: Detailed Breakdown of the Deka Universal Battery Hold-Down Cross Bar
- Search Results: 15" trailer rims
- Search Results: trailer hubs and drums
- Search Results: brake actuator
- Q&A: What Is The Distance Between The Mounting Holes On The Toledo Replacement Master Cylinder?
- Video: In-Depth Review of the Replacement Shock for Demco Hydraulic Trailer Brake Actuators
- Article: How to Bleed Your Trailer Surge Brakes
- Shop: Trailer Wiring
- Search Results: smart straps
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Best Option for Replacing 85841 Master Cylinder on Atwood Drum Brake Actuator
- Q&A: Will the Demco Hydraulic Brake Actuator # DM72VR Replace a TDE-660 on Boat Trailer?
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Master Cylinder for Older Model Titan Model 60 Brake Actuator




Jordan
12/21/2017
I think I only may need a new shock and cylinder. I took some more pics. It is a Balcrank product. Can you advise me on the corrects parts. I really appreciate the help.