Availability of Side Vents for Toy Hauler Trailer
Looking for a side vent, size 9 x 9, for the toy hauler area of a Fleetwood Toy Hauler | For trailer side vents we have a couple options but none that are 9 inch by 9 inch. We have the part # 9139 which is 10 by 12 inch and the part # HMAV2-AVT2...
Can the Universal Cam-Door Lock Be Used on 42 Inch Doors
Are these strong enough for rear cargo doors on a farm grain truck with 42inch sides? | The Universal Cam-Door Lock for Enclosed Trailers # 383200 that you referenced are the same kind of door latches that are used semi-truck trailers. As long...
How are Spacers Used When Installing Cam-Action Lockable Door Latch Kit # PLR458-018
I purchased this kit PLR458-018, but have not been able to figure how to install the spacers. How are the spacers attached? Are they also welded onto the pipe? | I attached a picture that shows the spacers lined up on the cam door latch # PLR458-018...
Can Cam-Action Lockable Door Latch Kit # PLR158 Install on Left and Right Door
Morning Item #plr 158 Can that be used on a left or right door? Thank you | Yes you can install the Cam-Action Lockable Door Latch Kit # PLR158 on either a left or right hand door setup and it would work great. |
Will the Plunger and Rubber Socket Door Holder PLR62-66 Work On a Motorhome
Would this work for a motorhome door? | Yes, I don't see any reason at all as to why the Plunger and Rubber Socket Door Holder part # PLR62-66 would not work with the door on your motorhome. It is designed for an enclosed trailer door which...
Picking Out Replacement Door Latch for 1998 Prowler Travel Trailer
We need a new door latch for our trailer. We may also be looking for other parts to upgrade this unit which is used now as an extra house on our property for guests. Do you have parts for this? It appears to be made by Fleetwood. Thank you,...
Which Side of Piano Hinge H300 Should Face Up
What side should be up when ramp is open on the trailer, ribe side or flat side | I'd put the rib side up on the 3" Wide Continuous Steel Hinge # H300 if for no other reason it would allow you easier access to cleaning and lubricating the...
Dimensions of Keepers on Lockable Door Latch
what are the dimensions of the keepers. I want to install it on the rear door of an old ambulance I use for a tool truck. There is limited room above the door and a light. | The bottom keeper on Cam-Action Lockable Door Latch Kit # PLR258-002...
Recommended Cam Action Door Latches for a 2017 Featherlite 8127 Stock Trailer
I need a cam locking pole and mounting ihonges for a 2017 featherlite 8127-824 Stock combo for the side door on the drivers side | For your 2017 Featherlite 8127 Stock Trailer, you can use the Cam-Action Lockable Door Latch w/ 36" Pipe for Enclosed...
Is Handle of 45" Long Side-Door Bar Lock Assembly # PLR3057-45 Centered on Bar
IS THE HANDLE APPROXIMATELY 22-1/2 FROM EITHER END | The handle of the 45" Long Side-Door Bar Lock Assembly # PLR3057-45 is centered on the bar so yes it's 22-1/2 inch on either side. |
Polar T-Handle Latch # PLR5730 Depth from Mounting Flange
HOW DEEP DOES THE ASSEMBLY SET FROM BACK OF FACE TO ACTUATING MECHANISM. AND IM SORT OF IN A TIME CRUNCH PLEASE HURRY | I attached a picture that has all of the depth dimensions for the Polar T-Handle Latch # PLR5730 that you referenced. |
Recommendations for Converting a Barn Trailer Door to a Ramp Door
I have an old Wlls Cargo enclosed trailer that has a single barn door at the back and I would like to convert it to a ramp door? What parts do I need? Thanks | To convert your barn door on your Wells Cargo enclosed trailer to a ramp door I would...
How Many Polar Vents Should be Used for 24' Enclosed Trailer in Southwest Florida
We have 24 foot enclosed cargo trailer for Police dept. off road vehicles. Was looking at the Polar sidewall mount vents. My question is, how many do you think we would need, or do you mount top and bottom of side wall at each corner. We are...
Does 36 Inch Long Side-Door Bar Lock Assembly Come in Black
do you have the 36 side door bar latch in black. thanks | The only color available is the standard steel color for the 36 inch Side-Door Bar Lock Assembly # 305736. This lock assembly is zinc-coated to protect against corrosion, and though...
What are the Dimensions of the Enclosed Trailer Door Hook and Keeper # 383400
Can you give me the physical dimensions of the two pieces for this part? Especially the distance between bolt holes. | I went out to the warehouse and pulled Enclosed Trailer Door Hook and Keeper # 383400 to measure it. First, the mounting holes...
Bolt Hole Dimensions for the Enclosed Trailer Door Hook and Keeper # 383400
I have a new trailer Haulmark, poassport 7 X 12. Already the wind has bent the door latch over and it dont stay all the way open. I want the one that you offer. But the question is will the screw holes line up with mine. I dont want to have...
Will The Polar Butterfly Vent Prevent Rain From Entering The Trailer When Closed
Is this going to keep out rainwater when closed? | The Butterfly Vent and Gasket for Polar Roof Ventilator - Aluminum # PLR24-004 is designed to prevent water from entering your trailer when closed. The included gasket will also help form a...
Trailer Cam Door Handle that Uses Heavier Pipe than Stock System
The pipe in my cam lock is so thin, like electrical conduit. I am a licensed Contractor What is the gage of the pipe? the welds at the handle/ pipe are broken on both sides of my trailer. Will the bolt pattern match my trailer? | I actually...
Finding The Correct Ramp Door Hinge For A 2011 12' x 6' Mirage Cargo Trailer
Hi there I’m looking for hinges for my 2011 12 x 6 Mirage cargo trailer with the ramp door would these be the correct ones? #plr1902 -8-3/16-1”pin diameter-steel | It is quite possible that the # PLR1902 hinge will be correct for your 2011...
I'm Looking At An Aluminum Butt Hinge For My Horse Trailer Ramp, Is This A Good Hinge?
hi I have an old horse trailer . looking at your butt hinge for the ramp is this a good hinge for the trailer if so how many hinges do I need ? | An aluminum butt hinge like Polar's # PLR1005 is a durable hinge that could work great on your...
Can Shims be Used to Install Cam-Action Lockable Door Latch Kit so it Sits Flush
I have a horse trailer and want to install PLR658-002 on both doors making a left and right door application but due to the thickness and the strength needed for the doors they are made of 1 1/2 tube steel which prevents prevents flush mount...
Door Locks for 2014 24ft Husky Cargo Trailer
Good morning, Thursday/Friday our 24ft Husky Cargo trailer was stolen. Thankfully we have located the trailer but they cut off all of the latches so that they could clean out all of our tools. Can this keyed lock replace the hinged pole locking...
Is There a Required Handle Thickness for the Stainless Steel Hasp PLR158-102-SS
How wide and thick are bar handles that fit in this latch? Most seem to be 1 1/4inch wide, but how thick are they? I want to use these to replace aluminum units that can be easily cut or pried. | The Stainless Steel Hasp part # PLR158-102-SS...
Is The Dump Door Hinge for Dump Trailers # PLR1904-Z Able To Open 180 Degrees?
Will this door hinge open 180 degrees or more? Or does it stop at a certain point? | The Dump Door Hinge for Dump Trailers # PLR1904-Z is capable of opening over 180 degrees. While there are no stops built into the hinge do understand that it...
Filter Your Search
Contact and Help