Replacement Windshield Wiper Blades for 1997 Lexus LX 450
Why is one 16inches and one 18inches when both should be 18? 1997 lx 450 is the vehicle. is the scrubblade bigger? and has clearance issues? | Actually, Scrubblade recommends the # SC87FR 18 inch blade for the driver side and the # SC67FR 16...
Is there a Maximum Ceiling Height for the Thule MultiLift Cargo Lift and Storage System
My garage has 13foot ceilings because I have an auto lift. Im trying to find out if this hoist will work with my ceiling height. I didnt see anywhere that this was mentioned. | I checked with Thule and the max length from the mounting surface...
Tongue Weight Capacity for Pintle Hook part # C48004
I saw an expert say that the rated tongue weight of a Pintle hitch is 1/4 the total GWR. 5000 LBS Is there a class of hitch that can handle that kind of tongue weight? | For the applications that we normally deal with we don't have a trailer...
Installing the Hopkins Smart Hitch Backup Camera on a 2013 Ram
I have this camera but it doesnt work on my 2013 Ram. Why not? | We have learned that the 2013 and newer Ram trucks do not provide enough voltage to power the Hopkins Smart Hitch, part # HM50002, simply by plugging it in to your truck. In...
Left Signal on Trailer Flashes when I Indicate Right Turn
I have a 96foot LX450. When I signal a left turn all works as it should. When I signal right, the lights on the right side passenger side of the trailer go out and the left turn signal blinks on the trailer. All the lights work properly on...
How to Pick Out Replacement Bearings and Seal for a Camper Trailer Hub
Do you know what wheel bearing and grease seals are need for a 2002 Coleman Cheyenne popup camper? Thanks, | To pick out bearings for a trailer hub you will need to remove one of the hubs so that you can remove the bearings and get the numbers...
Recommended Roof Rack And Kayak Carrier For 2015 Chrysler Town And Country
Have a 2015 Chrylser TandC with factory stow and place roof rack. The crossbars are low and seem low quality. Im hauling 2 kayaks and my Malone staxpro2 does not fit factory crossbars. Got anything better and more durable that will screw...
What Vehicles Does the Curt Hitch part # 13364 Fit
what years do the trailer hitch for a 2013 town and country fit | The Curt Hitch part # 13364 that has been confirmed to fit your 2013 Chrysler Town and Country fits the following vehicles: 2012 - 2014 Dodge CV 2012 - 2015 Ram CV 2008 - 2015...
Recommended Tire Chains For Off-Road And Snow Use On 1996 Lexus LX450
Please recommend snow tire chains for my 1996 LEXUS LX450. The truck has a 2inch lift for additional ground and tire clearance. Tires are Goodyear Wrangler Duratrac 265/75-16. The chains will be used on four wheels on snow and ice covered paved...
Draw-Tite VS Curt Class III Receiver
I have a 1997 Lexus LX450 with the Draw-Tite Class III receiver installed. It has been there for quite a while and is has rusted so I thought it was time to replace it. I would like some information on Draw-Tite vs Curt for the class III receiver....
What Size Dowel Nuts Do I Need for My Vehicle?
Where can I find the dowel nut replacement bolt for gutter mount. Its for an 1996 landcruiser | We do have plenty of replacement dowel nuts like the Replacement M6 x 16 mm Dowel Nut for Rhino-Rack Accessories # RR56TB which are M6 x 16 mm threaded...
Hitch Pin Hole to Bumper Dimension for Curt Hitch part # C12264
on a chrysler 2014 town and country with stow and go, what is the clearance from the center of the hitch hole or pin hole to clear the bumper for a bike rack? For a Curt 1.25inch trailer hitch | The distance from the center of the hitch pin...
Will Dexter Nev-R-Adjust Electric Brake Assemblies # 23-468 & # 23-469 Work w/ Axeltek Brake Drums
My existing rig has a 3500lb axle with Axletek brakes. The Axeltek drums are 10inch dia x 2.25 wide. Can I replace the Axeltek manual adjusting brakes with the Dexter never adjust and utilize the existing Axeltek brake drums. The existing drums...
Do Factory Bump Stops have to Be Cut to Install Air Lift Air Bags on a 1997 Lexus LX450
Hi! Do I need to hack off part of the bump stop for this installation? Please send install procedure specific for a 1997 Lexus LX450. | Yes you will need to trim away the factory bump stops to install Air Lift helper springs # AL60728 on your...
Installation Sockets Needed for 2016 Chrysler Town and Country Draw-Tite Trailer Hitch Installation
2:42 on video What is the socket size for the 3 bolts holding the exhaust system? 4:45 on video When tightening the 5 bolts on the hitch, what is the correct torque setting? 75579 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit -...
Brake Controller Installation on 1997 Lexus LX 450
looking for a Prodigy direct plug in wiring harness for a 1997 Lexus LX450. Do they make one or do I have to use a universal and wire it myself? | The 1997 Lexus LX450 was not factory equipped with the connector under the dash for a plug and...
Recommended Hitch Mounted Bike Rack for 2006 Chrysler Town and Country
Is there a 3 bike rack to fit my vehicle that doesnt have the upper arm with foam protector go on the window ??! 2006 Chrysler town and country | All of the trunk mounted 3 bike racks for your 2006 Chrysler Town and Country will have an upper...
Can The 7-Way Trailer Connection Be Used To Power Winch If Vehicle Is Running
Can the 7 pin plug be used to power the winch if I have my truck running? | The wiring that feeds the 12-volt accessory circuit on the 7-way trailer connector is of too small a gauge to allow enough power to pass through to run a winch. The...
50mm Ball and Getting Lights to Work on Altera Strada DL3 Bike Rack on 2016 Chrysler Town & Country
I have brought to the US my beloved Atera Strada DL3 bike rack and need a Euro-style ball mount 50mm - 1 7/8 to fit a 2 trailer hitch receiver. I am not sure though what lift I will need. Please advise. ALSO - if you can suggest the best...
Filter Your Search
Contact and Help