Installation Sockets Needed for 2016 Chrysler Town and Country Draw-Tite Trailer Hitch Installation
Updated 08/29/2016 | Published 08/27/2016
Products Featured in This Question
Question:
2:42 on video What is the socket size for the 3 bolts holding the exhaust system? 4:45 on video When tightening the 5 bolts on the hitch, what is the correct torque setting? 75579 Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2
asked by: Howard S
Expert Reply:
An M12 bolt which is what is being removed from the 2016 Chrysler Town and Country's frame for installation of the # 75579 Draw-Tite trailer hitch at the 2:42 time of the video, this bolt will use an 18mm socket.
In the instructions, which I have linked to this page for you to check out, it states that you will need the following wrenches/sockets for installation: 13mm, 15mm, 18mm.
You will want to tighten all M10 CL10.9 fasteners with torque wrench to 53 Lb.-Ft. (72 N*M) and tighten all M12 CL10.9 fasteners with torque wrench to 92 Lb.-Ft. (125 N*M).
If you are in need of a torque wrench, we offer the PowerBuilt Dual Drive Torque Wrench # ALL944001.
I have linked the above mentioned products to this page for your viewing and purchasing convenience.
