Can the CE Smith Offset Spare Trailer Tire Carrier Be Mounted to a Wall
Could I bolt this to front wall/rail on my aluminum trailer? | The CE Smith Offset Spare Trailer Tire Carrier part # CE27310G could certainly be mounted to a wall if the proper supports and hardware were used to support its weight. That said,...
Installing Post Style Guide-Ons When Trailer Step Sticks Out
I have a galvanized plate that sets behind the fender and goes to the end of the trailer that is fender width for stepping on trailer. How would you recommend attaching the guide ons? | The CE Smith Post-Style Guide-Ons for Boat Trailers - 60"...
What Are The Inside Dimensions Of The Buyers Products Utility Storage Box 3371712240?
Hello, I was wondering if the dimensions listed are outside or inside dimensions? Im assuming outside | You are correct, 44" x 19" x 17-1/4" is regarding the exterior of the Buyers Products Utility Storage Box - Black - # 3371712240 which also...
Lock for Use with Trailer Spare Carrier # CE22011Z-11050-2
I want to purchase the CE Smith Spare Tire Carrier for Trailers - Steel - 4- and 5-Lug Wheels - 12-1/4 Long - CE22011Z-11050-2. I want the lock that is included on the 9 1/8 carrier. Can you help? | For just the lock you are looking for with...
Diameter of Widest and Narrowest Portion of CE Smith Bow Roller Assembly with Bells
On the 3inch wide inner roller, can you give me the dimension for the largest diameter/dimension at the edges and the smallest diameter/dimension where the bow makes contact. Please see pdf attached | At the widest point of the roller # CE29334...
How To Replace a 10' Bunk Boards On a Boat Trailer
do you have 10 ft bunk boards | The best option we can offer to replace a 10' bunk board is two 5' bunk boards, the CE Smith Carpeted Bunk Boards part # CE27820 which will work just as well. The longest bunk boards we sell as one piece is 7'. |
Replacement Wobble Roller, Washer, and Retainer Recommendation for 1986 Load Rite Trailer
need two load rite wobble assembly for a 1986 load rite trailer Both are up front, one left, one right. Both are two rollers I wish to replace the entire assembly, not just the roller. Rollers seem to 5 inches in diameter Your form does...
Are Parts Available for Yates 5 Inch Wobble Rollers?
Do you sell all replacements parts for Yates 5 inch Ribbed wobble rollers for boat trailer? We would need replacement wheels, nuts, bolts, and other accessories. | We carry boat trailer hardware though not all parts for the Yates Ribbed Wobble...
Determining Correct Replacement Axle For Older Axle With Variances In Straight Spindle
I need to repace 2 hubs on my very old 1959 boat trailer. The seals were leaking and sprayed grease all over my wheels and fenders. I pulled the hubs off and the inner and outer bearings are both Bower 07100inch with races Bower 07196inch and...
Inside Diameter Of Bushing In CE Smith Keel Roller CE29517
Hello, im looking for specs. informations about the CE29517 keel roller i need the 5/8 inside dia tolerances on the bushings. Regards. | The inside diameter of the bushings on the CE Smith Keel Roller for Boat Trailers - PVC - 8" Long - 5/8"...
Fit of Hobie Mirage Outback Kayaks on Malone MAL25FR LowBed MicroSport Trailer
I am looking to use this with two Hobie outbacks Will they fit? Can the bunks be changed for rollers? Thanks | The crossbars of the Malone # MAL25FR LowBed MicroSport trailer are 78 inches in length. From what I found online, the Hobie Mirage...
Options for a Roller Style Guide-On for a Pontoon Boat
I purchase 2 sets of these and was able to put 3 on. The 4th one could not be installed because of the brace holding the center pontoon rails. see picture. I was wondering if there is a product that is straight up and down I could mount the...
Recommended Mounting Brackets To Support Steps On CE19504-2
the recommended bracket for the above fender offers no support under the side steps is there a bracket recommendation for that | You can mount the Mounting Bracket for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 1 # CE26098G...
Can Backing Plate Be Added to Aluminum Tandem Axle Jeep Style Trailer Fenders
Can the steel backing be used with these? | Since the Tandem Axle Jeep Style Trailer Fenders # HP42VR have an aluminum construction, I don't recommend using the Backing Plate # HP72FR with it because the backing plate is made of steel. If you...
Length Of Shaft Needed For 12" Roller With End Caps On Both Ends
Hi, I am looking to install the Yates Endcap for Side Guide Rollers - Heavy-Duty Rubber - 5/8" Shaft - Qty 1 Item # YR224-5 on the ends of a 12" roller. Can I use the: [Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel...
Are the CE Smith Carpeted Bunk Boards Treated
are the bunkborads made from treated lumber? thank you | The CE Smith Carpeted Bunk Boards like part # CE27845 are not treated. The marine grade carpet will do a great job of keeping out water so treatment is not needed. That said, if you would...
Replacement Idler Hub Assembly For A 1999 Coleman Mesa Popup Camper
Does this wheel hub fit a Coleman mesa 1999 popup camper | I would need to know what your current inner and outer bearing numbers are on you 1999 Coleman Mesa. I will attach a link below letting you know how to find it. The CE Smith Trailer...
Will CE Smith Swivel Bunk Brackets Replace Rusted Ones on Calkins Tandem Trailer
I have a 1998 Calkins tandem axle boat trailer that came with a 20ft boat. The trailer has 2 keel rollers and two long bunks. The original swivel bunk mounts are rusted out. Can I use the Smith Bolster and swivel to replace the rusted out parts?...
Availability of a Spool Roller Assembly Without the Roller
Is the spool roller assembly CE32100G available without the rubber roller? | The closest thing that we carry to the roller assembly # CE32100G at this time is the Panel Bracket # CE10300G. This does not include the shaft or the end caps, so...
Should Post-Style Guide-Ons Be Installed on Inside or Outside of Pontoons
which is better for pontoon trailer guides? Posts on the inside or outside of the pontoons? | You will want to install the CE Smith Post-Style Guide-Ons # CE27670 on the inside of the pontoons (see attached image). This will be just as effective...
How Far Way from the Trailer Frame Can the CE Smith Post-Style Guide-Ons # CE27640 Adjust
Just double-checking the amount these guides adjust out from the trailer, 13inch or 19. It appears that the 40inch high are 13inch and the 60inch high with LED lights are 19, but the information for this specific set shows 13inch so Im wondering...
Picking Out Non Marking 10 Inch Keel Roller for Boat Trailer
Need to replace 3 10 in keel rollers on my 1995 20 DC Astro. Is there a kit available? certain it would require the 13 x 5/8 inch shaft with pal nuts. Do not have boat close by to determine the correct size of the rollers that fit outside the...
Is Play Between Hub and Axle on Trailer Normal
I have had this trailers for 3 months. I feel like the trailer is louder going over bumps compared to when I first got it. It seems to be coming from where hubs connect to the axle. Although I feel the lug nuts are tight, When I pull the...
Boat Guide-On Compatibility with 19 inch Distance from Frame to Inside of PVC
CE27760 Can I install this in my Escort trailer, which has 19 horizontal distance? My Escort trailer has the frames located far inside from the tires, and has no crossbars. The distance between the outside of a frame and the end of boat hull...
Filter Your Search
Contact and Help