!Cherokee Alpha Wolf Travel Trailer  x   >   !Impala  x   >   !iRV  x   >   Marlboro  x   >  

I need a 4’ hinge x 6” , 1/2” pin. Do you have that or do I need to buy a 6’ hinge and cut it down? Thanks | We do not currently carry a continuous hinge in a 4' length so you would need to get the 6" Wide Continuous Hinge - 6' Long - 1/2" Pin...

I am having difficulty locating replacement parts for a 2014 Keystone RV Apache exterior clearance lights and also compartment door hinges. Can you help? | It looks like the 4" long x 1-1/2" tall x 15/16" thick Optronics LED Trailer Clearance...

I am looking at your 10 inch by 3/4 in barrel hinge can you tell me the weight limit they hold | I checked with the manufacuterer and the 10-1/4" Long - 3/4" Weld-On Hinge w/ Brass Bushing and Grease Zerk item # MA89ZR has a 576 lbs weight capacity....

looking for an aluminum hinge 3 W x 4 L x 1/4 Thick with 3/8 pin quantity 5 | It appears we do not carry a hinge that will fit those parameters exactly. We do offer a few 3" wide continuous hinges with a 3/8" pin like the # MA94ZR. This is a...

I am looking for a replacement hinge for my storage door for my 2019 Forest River, Sandpiper 384QBOK 5th wheel ? | I would be happy to help you but I do not have any way of knowing what hinge is currently on your 2019 Forest River Sandpiper....

Looking for cargo door hinges, for Coachman Chaparral 2017 model M-381 RD , thank you! | Usually RV cargo door hinges are piano style hinges that are between 3 and 4 feet like the part # MA85VR which is 4 foot long. This could also be trimmed...

What size is the low profile zerk grease fitting? When the trailer hitch side was welded, the fitting was ruined. Too much heat froze the ball bearing and one cannot grease. | I spoke to Lock N Roll and they use 6mm x 1 low profile zerk...

Can this hinge be cut down? | Yes, the Stainless Steel Piano Hinge # MA34ZR can be trimmed down. You will be able to weld it or drill holes to mount the hinge for your application. |

Can this hinge be cut and used as two 3foot pieces? Or would the pin come out if its cut in half? | I reached out to Marlboro Manufacturing and they informed me that it is okay to cut their 4" Wide Continuous Hinge - 6' Long # MA42VR in half....

Who sales them why is it so hard to find, I have a 92 skyline nomad , can not find door replacement LH hinges , rectangle 2by72 | With your trailer being 30 years old most parts are discontinued at this point so a lot of troubleshooting and...

we have an old Logan horse trailer with piano hinges that have rust bleed. We want to clean and repaint entire trailer. What is best way to remove rust from the hinges and protect them from rusting again? | On a Steel Hinge # MA52VR you will...

Can this hinge be shortened? And would this be suitable to be used for a ramp door extension or would there be a better product? | Yes, the 6' Long, 4" Wide Continuous Hinge # MA85VR can be cut down to the length needed. It is a 270 degree...

Need to replace the grease fitting on my Reese 20K Goose Box #94720. I tried a standard 1/4 x 28 grease fitting with no luck and can not find the correct size or pitch on the Reese or any other website. Any assistance would be greatly appreciated....

What are the weight specs for this hinge? Want to support a wooden barn door. Door will be approx 10 feet high by 6 feet wide. Door could be approximately 400 - 500 lbs I intend to use 3 hinges Can send pictures of intended hinge design tonight...

Item # MA52VR 6inch Wide Continuous Hinge - 6foot Long - 1/2inch Pin Diameter - Steel Im not seeing any information on loading capabilities. Do you have any information or should I just work with my basic knowledge of steel? | The 6" Wide...

Can I cut it down to 7’ and not rune it? | Yes, you can cut the 8 foot long hinge kit part # MA32VR down to 7 feet in length and it would work great. |

What is the weight limit on these hinges? Looking to make a hinged queen size murphy type bed in our cargo trailer. | Marlboro piano hinges like the 3" Wide Continuous Hinge # MA74ZR you're looking at do no have weight capacities. Marlboro mentions...

I need a 50 door hinge for my Palomino pop up truck camper. Would I be able to cut your 72 aluminum door hinge to the required length? | Yes, if you wanted to cut down the Marlboro Continuous Hinge # MA64ZR you would want to first remove the...

Im looking for barrel Is hinge for my horse trailer tack room door. | Hello Kristine. We carry quite a few hinges and barrel hinges, so we very well may have what you need. If you can provide some dimensions for the hinge, I can take a look...

I was looking to weld on 2- MA59ZR 10 hinges and was wanted to know what the weight capacity they can support? Thank You | Marlboro does not list weight capacities for the # MA59ZR that you referenced. They state it will be up to the installer...

How much weight can this hinge hold? Thanks | Hinges such as the Weld-on Barrel Hinge # MA29ZR are not given specific weight ratings as that is at the discretion of the fabricator. There's way too many variables to give a standard weight rating. I'd...

I need a replacement Zerk fitting for a skid wheel. What size do I need for the following model? and do you carry? 48-979023 UltraFab Weld-On Jumbo Steel Roller Weld On - 2-1/2inch Wide x 3inch Tall Item UF48-979023 | Hello Gaby. I reached...

Does this hinge have any kind of coating to prevent rust? Or does it need painted? | The 4" Wide Continuous Hinge - 6' Long - 3/8" Pin Diameter # MA85VR is made from mill finished steel with a commercial die cut quality, however they are not...

I have a need for 2 sets of hinges 50inch long for a door 70inch wide constructed of stainless steel - overall weight 600# materials Stainless Steel Please advise if your hinges with 1.2inch pin will be capable of handling the load Mounting...