Result: Boat Loading Guide

I have a ez load boat trailer with tandem axles. I believe the axles are 3500lbs axles. | I have a ez load boat trailer with tandem axles. I believe the axles are 3500lbs axles. I currently have surge breaks...

If not, how about mounting them on my trailers raised boat guides that dont get in the water? Id power them off the existing trailer lights. | Id like right and left rear corner blind spot cameras on my boat...

I attached a link to the right that contains detailed installation instructions for the Titan Zinc-Plated Brake Actuator # T43397007K that you can use as a guide to install this coupler on your 1994 Maxum 20 foot boat trailer. |

I recently bought the boat and trailer and have found that most of the hubs and hardware are rusted. | Hi there I have a 2006 EZ loader tandem Axle boat trailer for my 24 ft glastron. The current brakes are a four-wheel hydraulic...

I cant seem to locate any cross-referencing guide of any sort. Thank you for any help you may provide. | I have a Coyote Boat Trailer with two 3500lb axles. I need to replace all 4 hydraulic disc brake calipers and 10inch disc/hub...

I have a 2002 Load rite dual axle bass boat trailer. I need a new actuator with the lock out solenoid. | I have a 2002 Load rite dual axle bass boat trailer. I need a new actuator with the lock out solenoid. Please...

You will need to determine the axle capacity of the trailer and compare that to the weight of the boat when loaded and ready to tow. If the load is too great for the axle you will need to either reduce the weight to an acceptable level up to the axle capacity or replace the axle with a higher capacity axle. |

The Fulton Fold-Away Coupler Hinge Kit # FHDPB230101 will work perfectly for your LoadRite 16 foot boat trailer as long as the tongue measures 2 x 3 inches and the trailer tongue thickness is between 1.88 and .120 inches. |

Can you guide me to the appropriate one? I do want the electronic disconnect. | I need to replace the actuator on my boat trailer. It came with a 2012 Skeeter zx21. It reads A-60/A-75 on the tongue but I cant get the numbers...

While we definitely have what you need, I am guessing there was maybe a misprint in regards to the tongue weight, which can't be a max of 3,500 lbs (tongue weight is generally 10%-15% of the trailer's maximum loaded weight). So I am guessing that the trailer's overall max loaded weight is 3,500 lbs, which makes a lot of sense because you mentioned your boat was 1,600 lbs. |

I have a Load-Rite boat trailer with a torsion axle that sits too low. | I have a Load-Rite boat trailer with a torsion axle that sits too low. The skeg of my outboard is scary close to the ground. What are...

The rims are 6 on 5 1/2, 15 inch. Can you guys guide me on everything I need to switch the boat trailer to electric breaks? | The shackles are 3 inch center hole to center hole. | For a new hub/drum that...

I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. | I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. The four hole backing...

Hello, I read the info sheet about adding 2nd axle to boat trailer. My question is when e de determining tongue weight the picture references the trailer weight,does it not matter about total load weight with the boat on the trailer Thanks |

Hello, I have an 2006 EZloader boat trailer with tapered spindles. Im looking for a bearing kit. | Hello, I have an 2006 EZloader boat trailer with tapered spindles. Im looking for a bearing kit. The Timken bearing kit looks...

I have a 1995 Mastercraft Prostar 205 boat. The boat is on a single axle manufacturer original trailer. | I have a 1995 Mastercraft Prostar 205 boat. The boat is on a single axle manufacturer original trailer....

I’m looking for a complete idler hub assembly for a 2002 load rite tandem axle boat trailer. It’s 6 lug VIN 5A4NF5V28220XXXXX | I’m looking for a complete idler hub assembly for a 2002 load rite tandem axle...

A surge brake actuator will need to be based off of the gross vehicle weight rating (GVWR) of the trailer with the boat loaded. As long as the boat and trailer do not weigh more than 12,500 lbs I recommend using the Titan Zinc-Plated Brake Actuator part # T4750820. |

do you have a caliper rebuild kit for a knott caliper AKK 6B6284 202004161323 ARE NUMBERS ON CALIPER ITS ON A 2021 LOADRITE TANDUM BOAT TRAILER THKS | do you have a caliper rebuild kit for a knott caliper AKK 6B6284 202004161323 ARE...

Im looking to increase the load capacity of the hubs as the boat itself is around 2500 lbs empty. | I have a custom made boat trailer with 5 on 4-1/2 hubs, 14inch wheels, with LM67048 inners, and LM11949 outers...

Its sounds like you would like to replace the electric over hydraulic actuator you have on your 2005 Load Rite boat trailer in favor of a surge brake actuator. | i have a 2005 loadrite tripple axle 12500lbs...

I have a 2004 EZ Load trailer for a Skeeter boat. I am replacing bearings and thinking it may be simpler to replace the hubs? | I have a 2004 EZ Load trailer for a Skeeter boat. I am replacing bearings...

| On a boat trailer with electric brakes you will use a breakaway kit. | On a boat trailer that was converted to electric brakes, how are the brakes applied if the trailer breaks away from the tow vehicle ? Any help would...

Hi - I’m getting ready to order Kodiak disc break kit K2R526DKG 12”6 on 5-1/2 and have an existing TDE model 16.5 actuator on my recently purchased 2016 boat and trailer. I’m looking at the Demco Listed at 494.15 with 16k load rating vs the Dexter listed at 604.93 - 12k load rated - aside from the obvious price difference which would you recommend ? |