Result: Boat Loading Guide

I have a 395vs ranger just bought the rollers on the front are they just for guides or can you put a little weight on them? Thanks. | Thank you for providing the photo of your boat and trailer and the bow guide rollers you have just installed....

I am considering installing these roller guides on my Paddle King pontoon boat trailer. The trailer is a lightweight build and carries my 13foot pontoon boat. The trailer frame construction is mostly 2inch x 2. #1 question is will the standard...

I need the entire bracket for the roller. Mine is welded on with no way to replace just the roller. The new one can be welded on or bolted on no difference. Can you supply? | The Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber...

I have no keel roller on my 2004 Zieman boat trailer and the side carpeted boards are about 4 away from the side of the boat, with no adjustable means to the welded brackets. The boat is only a 15 ft alumanum V-bottom by Smokercraft, but it...

I would like to use this on a drive on floating boat lift, with the large plate bolting in a horizontal position to the structure. Can you tell me what the height of the hole will be in this position, measuring the distance from the flat plate...

I have an 18 foot Alumacraft boat with a EZ Loader trailer. The trailer is a pain. It has two bunks only to load the boat, along with the front roller bumper stopper. The boat virtually will load crookedly each time it is run on, causing some...

I am getting to old to lift my wood dingy on the trailer. I have a Malone trailer where the two cross beams are 3 feet apart. I want to user roller bunks and purchase from you but I dont know what parts I need and if you have a diagram of how...

Do u have any of these available for purchase? 2” wide 3” long galvanized u bolts Need them to secure guide on posts to boat trailer | The u-bolts we offer with the most similar dimensions to what you need is the part # UBZC716X212X400 which...

I have an 18 ft Lowes bass boat. Want a dolly to help move it in my garage. My trailer says max Tongue weight is 3,500 and is a class 2 trailer. Boat weights 1,600 pounds dry. What dolly would you recommend? Thanks so much | While we definitely...

I have a broken wheel stud on a load rite double axle boat trailer. The threads are 1/2-20, splines are 5/8 wide and 22 per inch, spline length is 5/8, the base length is 11/16, I dont have the thread length since this one is broken. Can you...

Im in need of replacement wheel lug studs. My existing ones measure 1/2x20 with a overall length of 2. The knurl is .560 and about 1/2inch long. Do you have any thing that we work? | I recommend using the Trailer Hub Wheel Stud item # 7-122...

I just got a 1988 Cox tandem axle boat trailer with boat, but it is not equipped with brakes. The four hole backing plates are on each axle. The boat et al weights in at about 3500 lbs so by WI law it needs brakes. Just what specifics do I have...

TRAILER FENDER MOUNTING HOLES AND BRACKET HOLES DONT MATCH UP. I ORDERED FENDERS FU008559 AND BRACKETS PF775-BKT-2 FOR THE LEFT AND RIGHT SIDE OF MY BOAT TRAILER. CAN YOU HELP ME RESOLVE THIS PROBLEM?. THANK YOU FOR YOUR ASSISTANCE. | To install...

Will these fenders fit? | The Redline Trailer Fenders # PF11X35W-2 you were looking at, are designed to fit 15 inch tires. However they are not specifically designed for particular trailers. The best thing for you to do is to compare the...

Hello, I am looking at replacing the side guide rollers on my trailer. The current rollers are 12x 2-1/2inch w/ 1/2inch Shaft. I found the correct replacement roller on your site from Yates along with a top cap but I cannot find the right length...

Hi, Need to new U-bolts for my boat trailer. GVWR= 4,650 lbs. Max Load Carrying capacity= 3,500. Tandem. Based on that, I assume my trailer weighs 1,150 lbs?. I have a round axle. Plate is in good shape so I believe I just need the U-Bolts...

Will this help with my ‘05 F250 w/a 6” lift, that’s typically loaded with tools and pulling a 24’ boat w/ a large motor sway and sag are my main issues? I haven’t seen any of these trucks mention being lifted. | Hey Thomas, Yes, the RoadActive...

1. Do you carry a tire and galvanized blade style wheel combo for a 2012 Trailstar boat trailer? Tire size is ST 175/80 D13 load range C. Wheel is 5/4.5. 2. Do you carry stainless steel locking lug nuts for the 2012 Trailstar? | We do indeed...

I have a 2018 Nissan Titan and I plan on purchasing this product but I need to know if it will work for what I am doing. I plan on towing a boat which weighs about 4500lbs and a truck camper that weighs 1100lbs. My towing capacity is 9500lbs...

Can you put 12 wheels on this model? Lift handle. Thanks for the quick feedback and great customer support! | We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned...

Recently purchased a 2019 Ford Raptor that I will be towing a 6000 lb boat with here and there approximate 175 miles each way. I did notice the immediate sag and am looking to try and eliminate some of that. I ordered both Sumo Springs and...

I have a 2019 F150 4x4 extended cab, 6.5foot Box. Its rated for a payload of 1750lbs. I put a slide in pop up camper in the bed that weighs 1100lbs and tow a smaller boat with about 100lbs of tongue weight. The camper is fairly easy to load...

In need a Heavy Duty Roadmaster Active Suspension Kit for a 2002 Chevy Suburban 1500, 4x4. | RoadActive # RAS4611 Active Suspension (2000 pounds) Standard Duty is a confirmed fit in my Fit Guide for a 2002 Chevrolet Suburban 1500 with rear leaf...

I want to move my kayak on trailer by hand, but getting older. kayak loaded weights 100lbs how much does trailer weigh. thanks | The CE Smith Multi Sport Plus Boat part # CE48870 weighs around 475 lbs. That said, you will only be lifting...