Search: 1/2 wheel stud > !Alpha Systems x >

Result: 1/2 wheel stud

by a white label and the color of the wires. The wire colors are (1) Red/Black wire, (1) White wire, (1

The battery charge wire will go on the smaller Black stud, and an M6X1.0 metric nut is required to attach | Technical Bulletin Summary: Wiring an aftermarket brake control to a 2007(new body style)-current...

Replacing the Bearing, Races and Seals on a Trailer Hub

Description on how to remove, grease, and reinstall trailer bearings, races, and seals. Also some quick tips on backing the bearings with grease.

, with the wheel studs facing up on a hollow cinder block or on a couple of 2x4s. Then use a 1" wood dowel rod | No parts are more critical for the dependable performance of...

Snow Tire Chains Review

When snow and ice make driving difficult, snow tire chains can give you the traction you need to maintain control of your vehicle. The following will give you basic information on using snow tire chains safely.

Wheel Drive) - Can use 1 or 2 sets With only 1 set of chains, often they are placed on the rear wheels | When snow and ice make driving difficult, snow tire...

Parts Needed to Add Hydraulic Drum Brakes to a Trailer

trailer, brakes, drum brakes, hydraulic brakes, actuator, brake actuator, hub, drum, brake line, spindle, bearing, seal, flange, brake flange, hub-and-drum, brake assembly

(dimension C) and L44649 outer bearings (dimension D). The 10" hub-and-drum with a 5 on 4-1/2" | Are you thinking about adding hydraulic drum brakes to your trailer that has no brakes? Or perhaps you want to change...

Best 2020 1/2-Ton Trucks for Towing a 5th Wheel

What is the best 2020 half-ton pickup truck for towing a fifth wheel? Compare the top truck brands

Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer

This article provides information on how to convert a trailer from electric brakes or no brakes to a trailer with electric over hydraulic drum brakes. This article identifies parts needed to convert a trailer to electric over hydraulic brakes and explains the compatibilities of the different parts.

(dimension C) and L44649 outer bearings (dimension D). The 10" hub-and-drum with a 5 on 4-1/2" | You may be considering adding electric over hydraulic drum brakes to a trailer without any existing brakes or converting...

Best 2017 Trucks for Towing a 5th Wheel

What is the best 2017 pickup truck for towing a fifth wheel? Compare the top truck brands

. View comparisons for: 1-Ton Trucks 3/4-Ton Trucks Half-Ton Trucks .pickedtruck { border: 2px solid | //$(document).ready(function () { // expansion.register({ "bindSelector":...

Trailer Hitch Receiver Sizes

Mount, RV, Fifth Wheel, Gooseneck, and adapters.

. The two most common sizes of trailer hitch receivers are 1-1/4" x 1-1/4" and 2" x 2". | To determine the size of your trailer hitch, simply measure the...

Hand Winches

Find out everything that you need to know about the different types of hand winches.

only the amount of line required. Winch Capacity Layer 1 Layer 2 Layer 3 Layer 4 Layer 5 Layer 6 600 | A hand winch is a tool that makes it easier to pull or lift large or heavy items such as: Loading boats...

Stromberg Carlson

Specs: Step dimensions: 24" wide x 8" deep Overall dimensions: 25-1/2" wide x 14" | thanks to Melissa, if you have any questions or would like additional information please let us know. --these products will...

Where to Position the Trailer Axle?

When positioning a trailer axle, the key is to make sure roughly 10 to 15 percent of the total trailer weight is placed on the tongue.

of 3,500 pounds. This trailer weighs 2,750 pounds under the wheels and 750 pounds at the end of the tongue | When Tongue Weight is Less than 10 to 15 Percent of Total Weight If you find that your trailer's...

Testing Breakaway Systems

Testing trailer breakaway systems.

to check the state of charge in the breakaway battery; it should be fully charged. Step 1. Unplug | Technical Bulletin SUBJECT/Summary: How to test electrical breakaway systems. SOLUTION: To test an electric breakaway system,...

Trailer Jacks

A trailer jack lifts and supports a trailer tongue, and keeps it level when not attached to the tow vehicle. Jacks vary in capacity and features for different applications.

water can cause Typically a wheel is included to make it easy to manuever the trailer 2. Pipe Mount | A trailer jack is an important part of safe towing. If you need to add or replace a jack on a trailer, the...

How to Choose a Spare-Tire-Bike Rack

Review and comparison of the styles of spare tire bike racks available. Evaluates each style of spare tire bike racks' vehicle compatibility, bike compatibility, vehicle accessibility and user compatibility.

spare tire is not compatible with most bolt-on spare tire racks Swagman offers 5-1/2" deep backing | Benefits of a Spare Tire Bike Rack Does not require hitch Makes it possible to tow while carrying bikes To help you choose...

How to Choose a Bike Rack That Will Clear a Rear Mounted Spare Tire or Bumper

Some vehicles, especially SUVs, have a spare tire mounted on the back. To use a hitch mounted bicycle carrier, a person needs to measure their vehicle. A person should choose a bike rack with enough clearance.

. This requires a measuring tape and a straight edge, such as a dowel rod or a yardstick. Step 1 Hold the dowel | Many SUVs carry a spare tire on the back of the vehicle. If you want to use a hitch-mounted bike rack on such...

Flat Towing Package for 2019 Jeep Cherokee

Find custom-fit base plates, tow bars, wiring, and braking systems to flat to your 2019 Jeep Cherokee behind a motorhome.

: 200px; margin-bottom: 10px; } .goldHighlight { border: 2px solid | /*Overall Document*/ .core p { margin-bottom: 10px; margin-top: 10px; } ...

Brake Controller Installation on a Ford Full-Size Van

Installing a brake controller on a Full-Size Ford Van may seem difficult, but following our guidelines makes it very simple. Vans with a factory-installed 7-Way only require the brake controller and a brake control wiring adapter for installation. Models with a factory 4-Way plug additionally require a 4 to 6-Way or 4 to 7-Way adapter.

the emergency brake pedal (Figure 1) . After locating the OEM plug and connecting the brake controller wiring | Even for experienced mechanics, a brake controller installation can seem like a complicated task, especially ...

1 2