Search: fulton f2 jack > Wheel Chocks >
Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Tim. There are only two jacks that will fit your current mounting bracket and they are both Fulton F2 jacks rated at 1,600 lbs. I have listed them below: Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind item #F1413060334 Fulton F2…
view full answer...Hey James, thanks for the information! To replace the inner member of your Dexter actuator we've got a couple of options depending on which one you actually have. The Model A60/A75/XR84 you have stamped on your is three different styles of brake…
view full answer...As long as your transmission is placed in neutral you will be able to flat tow your 2023 Subaru Crosstrek. To flat tow your Crosstrek you'll need the following parts: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-52927-5. Tow Bar:…
view full answer...15 inch trailer wheels can have the same 5 on 4-1/2 inch bolt pattern as the 14 inch wheel you have now. I know that's the bolt pattern you have because it's only bolt pattern found on 14 inch trailer wheels. So you could gain a couple inches…
view full answer...The best option for an electric A-Frame jack is going to be the Stromberg Carlson Electric Trailer Jack item #JET-3755. This jack is rated for up to 3,500 lbs of tongue weight. It will travel 19" and an additional 5" with the drop leg…
view full answer...In order to fix your loose cable on your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank #34466N4AB36GM, you will need to tighten the set screw that holds the cable to the valve stem. To do this. you're going to need to first…
view full answer...The etrailer hitch #e98912 that you referenced does not require removal of the rear bumper to install on your 2022 Subaru Crosstrek. For more info on how it installs check out the install video and instructions link I attached to this page as well.
view full answer...Hey David, great questions! The Under-Bed Rail and Installation Kit #RP67KR comes with both the 30183 and 30924 parts of the hitch system and are the same as the Ford OEM puck system. All you need is this kit and you'll have the 4 pucks and…
view full answer...The Malone Axis Truck Bed and Roof Load Extender for 2" Hitches - 375lbs Item #MPG907 has load stops that can adjust from 28" to 48" so you'll have a very snug fit hauling your 4' wide plywood.
view full answer...There may have been an older version of the Fulton trailer jack #F1413100334 that you referenced that required adding a grease fitting but this jack does not require that. It would work well for you and not require any greasing or maintenance.
view full answer...We can help you out here, though I should say that there isn't a jack wheel that is going to allow you to more easily move your trailer in your garage. Jack wheels are just replacements, so for example the Replacement Wheel Kit for Fulton Marine…
view full answer...I went ahead and checked out your Fulton XLT Bolt-Thru Swivel Trailer Jack #F26ZR, and the Fulton F2 Swing-Up Trailer Jack, and you actually won't be able to use this mounting bracket with your XLT jack due to the fact that the plate for the F2…
view full answer...Filters
- 4 results
Vehicle Fit
Filters
