Result: bubble levels

Hey Ryan, so we have the Hopkins RV level kit part # HM08525 which is a bubble level set for the front and rear of the RV. | Im working on a 2016 Salem Hemishpere,...

I am having an issue with my Hopkins Smart Level. The bubble on the bubble lever is perfectly centered and when I use a 48 inch level on my trailer it is also perfectly level. |

| The largest stick on level we offer for RVs is the Hopkins Never Fade Trailer Bubble Level Set # HM08526 which measures 3-3/4" long X 1-1/2" wide. | Im looking for a large...

Depending on where you install it on your RV yes, the Hopkins Never Fade Trailer Bubble Level Set # HM08526 that you referenced can be read in a rear view mirror. | Can the level be read from...

Two foot level it’s in the bubble is that close enough? Door opening is 29 inches and height is 29 inches. | What are the best fold down solid steps? My auto levels the front of camper won’t auto level front...

| The levels in the Hopkins Graduated RV Levels, item # HM08525, are not specific to their mounting location. | One is marked C the other is marked 3. Which one is mounted side-to-side or...

| Yes! The LED Smart Level that comes with the Hopkins RV Leveling Kit # HM0820K is available separately as part # HM08201. | Can. You buy the leveler by it self , already have blocks stackable...

I can definitely understand now wanting to screw something into the outside of your trailer, so the only option for a stick-on graduated level is the Hopkins Graduated RV Levels # HM08525, or the Hopkins Never Fade Trailer Bubble Level Set # HM08526. |

What is the purpose of the slotted section for mounting this WM6780 RV leveler bracket? It seems that if you level your 5th wheel prior to installation, you would use the single holes to mount it stationary, avoiding having to re-level your camper if the leveler gets bumped and moves in the slotted section. |

Does the WM67200 need to be installed perfectly plumb or is there adjustment for the front to back level bubble? | Does the WM67200 need to be installed perfectly plumb or is there adjustment for the front to...

| The Wheel Masters Level Master 2 Trailer Bubble Level # WM67200 will not have an issue being mounted on the front of your travel trailer. | I am a little reluctant to screw into my travel...

Ironically yes, you do need to use a level when installing the Wheel Masters Level Master Trailer Bubble Level # WM6700. | Does the 5th wheel had to be level to be able to...

I recommend Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket part # WM6780. | Do you carry the brackets for pin box mounting for this item | I do have...

The mounting brackets for the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 are made out of UV-protected plastic. | Wheel Masters 6780 Level...

| The Camco AccuLevel Trailer Bubble Level # CAM25563 is measured in degrees so that it will be compatible with multiple trailer sizes. | What do the graduations on this represent? Some gauges...

bubble level and green led lights do not match, when green lights are on bubble level is not centered? | bubble level and green led lights do not match, when green lights are...

Is there any way to calibrate the bubble level on this jack. I know, from the use of three other levels, that my travel trailer is level but this level shows quite a bit out of level. |

That could mean mounting a plate over the siding to provide a flat surface as an example. As long as the bubble level indicator is level, the rest of the unit will work as designed. | Will...

The overall length of the Camco AccuLevel Trailer Bubble Level # CAM25563 is 10 inches in length overall and 3 inches tall. | what is the length including the bracket where the mounting holes...

The Hopkins Never Fade Trailer Bubble Level Set # HM08526 measures 3-3/4" long X 1-1/2" wide and could be seen from a rear view mirror due to the reflective nature of the bubble in the level. |

Yes, the Wheel Masters Level Master Trailer Bubble Level with 5th Wheel Pin Box Mounting Bracket # WM6780 that you referenced does fit Reese pin boxes. | Will this fit a Reese pin box ? | Yes,...

DO YOU HAVE A REPLACEMENT CAP #EJ-3520-BCP THAT HAS A BUBBLE LEVEL? | DO YOU HAVE A REPLACEMENT CAP #EJ-3520-BCP THAT HAS A BUBBLE LEVEL? | I have a much easier solution. What you'd want to do is install the...

I went out to the warehouse and measured the Camco AccuLevel Trailer Bubble Level item # CAM25563. The mounting holes are 10-3/4" x 1-3/4". | What is the mounting hole pattern on level CAM25563?...

Hi Jason; yes, the Hopkins Never Fade Trailer Bubble Level Set # HM03926 adhesive backing will stick to your metal exterior. | I have a coleman 202rd with a metal exterior. Will these levels stick to metal?...