Result: CLEVIS PIN

It sure will Jake! The Dylux RV Air Conditioner System item #DY97FR in black or item #DY47FR in white can definitely be used to replace an older 410a Dometic AC system. These systems are all designed for ductless setups only. They include a 15,000…

No long-term contract, Natalie - but a service plan is required to use the trackers. When you buy the 3000 with wifi assist #PM84FR, 5000 #PM64FR, or 5000 with wifi assist #PM74FR from etrailer, you’re purchasing the hardware/device only. To activate…

The Bulldog Replacement Sidewind Gear Kit #BD500212 that you referenced is the correct repair kit for your Bulldog square tube jack according to my contact at Bulldog. The top cap you can use is part #BD017802. After you repair the jack you will want…

What you'd need is the part #BD017802 for your 4 inch square trailer jacks that are missing the top caps.

The screw and nut assembly, #BD500250, fits Bulldog jacks rated at 10,000 lb lift and 12,000 lb support. We also have kit, #BD500217, which is designed to fit Bulldog series 182 jacks from 2003 to present with a 12,000 lb capacity. I have included a…

Thank you for the photos! It looks like Marvel used to be associated with Atwood and they went out of business a while ago. We have some similar coupler styles but I'm not seeing that any of our repair kits having the same design as your coupler…

Technically you could use the MaxxTow Ball Mount, #MT70066, with a 1-1/4 to 2 inch hitch adapter, but I would not recommend doing this and I would bet that you would not be happy with this setup. There would be a lot of movement with the bike rack…

The lock code could be located on the key itself, on the face of the lock core, or one a sticker attached to the lock (see photos). Once you find this you can then order the correct replacement key assuming you have a Global Link, Fastec (FIC),…

The overall height of the Round, Pipe Mount Swivel Jack #TJP-5001S-B is 16-3/4 inches when fully retracted and 26-3/4 inches when extended. Basically from the center of the pipe mount to the top of the jack measures 6-1/2 inches.

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

With the bike rack only having a 1/2" diameter pin hole that will limit you to pins that are only designed for 1-1/4" receivers. Using a bolt with washer and nut is not a good idea as it is not near as strong as the receiver pins. The Curt…

I do have an option for you but the Rack'em Heavy Duty Stake Pocket for Flatbed Truck or Trailer part #PK-BSP does require the stake to be tapered at the bottom. I recommend CE Smith Stake Pocket for Flatbed Truck or Trailer - Galvanized Steel…