Nissan  x   >   Pathfinder  x   >   2008  x   >  

How long is this strap? Thanks | The Replacement Attachment Strap for Thule Roof Mounted Watersport Carriers # 853-5467 is a loop that when pulled tight measures 23-1/2 inches in length end to end. |

2008 Nissan Pathfinder 7 Way trailer connector. My vehicle already has factory 4-flat wiring connector. When I look at the product description for 118266 it says it is not compatible with 2008 - 2012 Nissan Pathfinders factory equipped with...

Hi, I just install my backup sensor on my Nissan pathfinder 2008 the installation was easy but my problem is I just listen one solid beep, already move the sensor positions and nothing any help? Thanks | If the license plate area on the 2008...

I have a 08 Nissan Pathfinder with Factory flat 4 plug. And I ended up getting the kit with all the adapters to do a 7 pin and brake controller my brake controller plugs in with the adapter under the dash but I cant use the two under the back...

Because of the safety chain positioning on my 2008 Pathfinder, Im forced to use the clamp upside down. This would pull the ball mount up instead of down in the hitch. My tongue weight is under 500 pounds. Can the u-bolt handle the weight of...

Pulled the panel off my 2008 Nissan Path finder and the jumper plug wasnt there. The pathfinder has a factory install 4 way and well as the factory plug for the electronic break but doesnt have the plug for the jumper?????? what now | The...

Will the C18115 work with a 08 pathfinder LE factory side rails and crossbars? | As long as the crossbars on your 2008 Nissan Pathfinder LE are spaced at least 15 inches apart and the crossbars are 3 inches wide or less, the Curt Roof Cargo...

I use a 7 pin connector when towing a trailer with electric brakes. everything works except the trailer battery does not charge. is there a fuse in the Nissan I need in order to charge the trailer battery while towing? | You will not need...

I have the reese 66021 and dual cam sway control. If I get a heavier travel trailer can I just buy heavier trunnion bars and use the head I have? If so what is the head rated for tongue weight and gross weight? | The same head is used on systems...

Trying to wire a 2008 Nissan pathfinder that has a 4 way to a 7 way and wire up a brake controller. Looking for products I need and instructions. Thanks | Everything that I see seems to indicate that the 2008 Nissan Pathfinder came with a...

I have a Pathfinder SE 2008 with 4 pin not a 7 pin factory plug. Please advise how to install this brake controller with a 4 pin. What other wiring is needed? | Since your 2008 Nissan Pathfinder SE did not come with a factory 7-way connector,...

Hi, I have a Yakima highroller and lost the keys for the core. My part number is A149 would you sell extra keys for these cores? Thank you for your help. | We have just what you need for a replacement key with part # Y8772-A149. This is a replacement...

I like to purchase some racks that can fit my 2008 nissan pathfinder with manufactured crossbar for my Nucanoe /kayak. Please advise on the tight products. THx | The Thule Top Deck Kayak Carrier with Tie-Downs, # TH881, will fit the factory...

Hello I have a 2008 Nissan Pathfinder V8 with tow package. I am interested in your RedArc tow package. I assume I would need to route blue brake and aux power to the rear connector or are these wires already available from factory harness?...

Hello, I have been looking for a wiring harness for my 2008 Nissan pathfinder LE, it already has a flat 4 connector at the rear but I need to upgrade to a 7 pin for proper break control on my trailer. Hopefully you can help me with this...

I bought a used enclosed trailer the electric brakes where completely done for. I purchased both the left and right 10inch Nev-R-Adjust Electric Brake Assembly along with brand new wire for the install. After the install I am getting a Output...

I have a 2008 Nissan Pathfinder with the tow package from the factory and I need to add the capability to tow a trailer w/ electric brakes. I believe part# C56226 is what will work. Is there one or more brake controllers available for this...

Interested in a weight distribution system for my 2015 Sure Trac car hauler. The trailer is 2000lbs and the car going on it is 4000lbs. I would like to use a system that does not need to be drilled into the trailer. Can you suggest one? Thank...

Need to wire 7 way to pathfinder 08. Got all the part numbers from your videos expect the relay. part number V38937-1. Says it unavailable. How do I complete this? | The only way we offer a way to get the brown relay you referenced now is to...

Nissan pathfinder 2008 7pin harness and brake ctrl installed how do I get the battery charge to work | If you are trying to maintain a charge for a trailer battery via the 7-Way, you will want to use the top right pin on the 7-Way (if looking...

I have a 2008 Nissan Pathfinder and tried to rent a trailer. They hooked up the trailer and the brake and turn signals did not work on the trailer. It is all factory installed hardware and has worked in the past. Not sure what the deal is....

I have a 6x14 enclosed trailer which I will be carrying my 2009 Harley Ultra Classic in. The dry weight of my Harley is right under 900lbs. I estimate with fuel, tools and other items, I should be carrying between 1,100-1,200 lbs. which ST225-75-15...

have connected the wire harness from nissan and installed relay two for a 7 pin connector. i still cannot get the charge wire hot? doea the factory wiring have a battery charge wore standard or am i missing a part?? | On your 2008 Nissan Pathfinder...

Do you sell just the vehicle adapter for the prodigy p2 90885c. I have a 2008 nissan pathfinder. Thx. | We do offer the brake controller adapter for your 2008 Pathfinder. To install the Prodigy P2, part # 90885 in your Nissan, you just...