GMC  x   >   Ram  x   >   !EVO Formance  x   >   Tow Ready  x   >  

have a 4 pole on truck and trailer has a 5 point. looking at the adapter you guys have just want to make sure its the correct one.. | Yes, the 4-way to 5-way part # 20036 that you referenced is the correct adapter you'd need to convert the 4-way...

Brand new trailer works on buddy’s new chevy my dodge won’t recognize it. Lights all work cleaned all terminals for 7 pin both sides on truck . Fuses look good hard to see them but I think they look good. I did the air suspension but those...

I have a HM47425 when I hook it to truck and trailer every thing works but do not have brake lights.do u have any suggestions that may help me...thanks | Does your trailer have separate brake lights from turn signals? If so, the part # HM47425...

2015 ram 3500 dually - i took some readings today and the 12 volt auxillary lead on the 7 pin receptacle is hot even with the keys out of the ignition and the ignition off. we tow a trailer and i would like this lead to be hot only when the...

Hi I bought a Reese 16 K dual pivoting sliding fifth wheel hitch and I need some rails for it. I have a 200 hi I bought a Reese 16 K duel pivoting sliding fifth wheel hitch and I need some rails for it. I have a 2012 Dodge mega cab diesel 3500...

Hi! Im curious how much clearance I would loose using the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2inch - C13215inch on my 2017 Ram Promaster City? Thanks! | When we installed the Curt Trailer Hitch Receiver # C13215 on a 2018...

I have a 2014 Ram 2500 I just totally rewired a trailer that I restored Ive got all lights working turn signals brake lights, clearance lights but when I turn on my hazard light on they work but not when I turn on my headlights | What you describe...

1 have a 2016 ram power wagon 6 1/2 bed with Rambox. I want to pull my 5th wheel camper. I need a 20000 pound hitch with rails no oem puck system. What do you advise. Thank you in advanced. | Since your 2016 Ram 2500 has the RamBox you will...

I just bought a 2018 Ram 3500 and the safety cables do not reach the safety hooks. They are about 10 inches short. Also, need large snap hooks with them My trailer weighs 16,000 lbs. What do you have to fix this? | To replace your safety chains,...

I have a 2020/2500 Dodge Ram without the factory puck system and was thinking of getting it installed I have the 5 flat spots in the bed of the truck. And I was looking at my frame behind the axle there are some threaded holes in the side of...

Im curious about the aftermarket vs. OEM wiring options. Both seem similar that you have to run the power wire to the battery. I like how the OEM allows you to mount on the outside. Do all of your options have to go through the door? I was...

5th wheel is 16,800 GVWR. Which Gooseneck pin box fits Lippert 1116 pin box | To replace a Lippert 1116 pin box you will need the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY43FR. The Gen-Y does not come with chains....

Hey there, I have a C13295 class III hitch for a 2014 Ram Promaster 2500, and im in need of the parts kit hardware install kit for this. Can you help me understand how to obtain it? Thanks! | The Curt # C13295 is a confirmed fit for your 2014...

I have a 2014 Ram, 3500, dually, w/an 8foot bed. It has the pre-drilled deals in the bed. Im looking at the Reese 5th Wheel Trailer Hitch 16,000 lbs Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs. You have...

Im looking at the Reese Goose box for the trailer, and need extra 4inch offset Looking at replacing OEM gooseneck with BW gooseneck seeing how the OEM is installed, the Bolts come from the top down, nuts on bottom. will I be able to use those...

Thank you for the two suggestions. I am concerned, when the trailer 2017 Jayco 195RB Jay Flight SLX and car 2016 Honda Odyssey are loaded for the weekend or for a week, the smaller wd hitch Reese Steadi-Flex Weight Distribution System w/ Sway...

In all of my readings, from every conceivable source, I have yet to find any article that addresses locking this hitch down, preventing theft. Something that expensive has to be on the radar of every petty thief, regardless of how much it weights....

I installed a curt front receiver hitch on my 2015 ram 2500 for a winch. My winch mount is not long enough so in need an extension. Ok that I understand is going to reduce my tongue weight 50. What about straight pulling weight which is 9k...

Which one is the closest match for my 2018 ram 2500 | The 7-Pole and 4-Pole Trailer Connector Sockets w/ Mounting Bracket and Wiring part # HM40975-11998 is what I recommend using on a 2018 Ram 2500 as the pigtail and trailer connector would...

What underbed 5th wheel mount system do you recommend for my 2018 Ram 3500 crew cab with long bed? Ive never had a fifth wheel hitch so my fear is the in bed rails will drive me nuts and am considering underbed rails. I want to be able to slide...

Good afternoon: When tilting the weight distribution hitch ball away from the tow vehicle that will even the weight out more on the tow vehicle correct? If the tow vehicle has air bags should the hitch be in the normal position? | If you tilt...

Hello I need the appropriate 7 pin / 4 pin setup for a 2021 ram pro master 1500. | To replace a 4-Way/7-Way connector on your 2021 Ram ProMaster 1500 you need the Hopkins Socket Kit # HM40975. Otherwise, if you're needing to ADD 4-Way and 7-Way...

Hi Guys, I have a Thule Euroway G2 921! Its awesome!!! Problem is its imported from the UK and has a 13pin adapter that wont fit my 2014 RAM 1500 pick ups flat 4 pin or 7pin adapters! What can I do, is there a kit? I dont want to cut and ruin...

Hello, Does this hitch fit the 3500 pro master extended. | According to Draw-Tite, their # 76050 Class III hitch is a fit for the 2020 Ram ProMaster 3500 Extended model. For a trailer wiring harness on vehicles without the tow package, use...