Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches

Question

Question:

In all of my readings, from every conceivable source, I have yet to find any article that addresses locking this hitch down, preventing theft. Something that expensive has to be on the radar of every petty thief, regardless of how much it weights. Please, how is it done?

asked by: Mark H

1

Helpful Expert Reply:

You have come to the right place, we have something for that and your other needs too. Please take a look at the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches - 1/2" Diameter Pin, # TR63254. Just replace one of the pins on your hitch with the 1/2" diameter lock for added security. The overall length is 7-1/2", usable length of 3-1/2" with a pin diameter of 1/2", chrome plating resists corrosion. If this does not meet your needed dimension, we have the Curt Base Rail Lock for 5th Wheel Trailer Hitches - 1/2" Diameter Pin, # C23256.

And also the Reese Pull Pin Lock Plates for 5th Wheel Trailer Hitches - Qty 4, # RP58093.

Take a look at the product review videos I have attached.

expert reply by: Jesse M

1

Answer 1

If you are needing to replace just the converter section of your Progressive Dynamics PD4575K18L, you can use the #PD4575LICSV. If you are looking to replace the whole power center it will be part #PD4575K18LS8.

view full answer...

Answer 2

You could use the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches #TR63254 as a locking saddle pin for the B and W Companion fifth wheel hitch.

view full answer...

Answer 3

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 5

I spoke with B&W about the B&W Companion OEM 5th Wheel Hitch like part #BWRVK3600 and they recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock with 2" Shackle part #ML140DLH to lock the handles on the base and it…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

We definitely carry what you are looking for. For hitches that allow you to directly bolt or weld onto the frame of your 2022 Grand Design Imagine 2600RB travel trailer, I recommend either the Adjustable Width Trailer Hitch Receiver for RVs, 18"…

view full answer...

Answer 8

Thank you for providing a photo diagram of your 5th wheel rear frame area where you are intending to install Ultra-Fab Steel Micro-Roller Skid Wheels #UF48-979021. The best location to weld on these rollers is at or just behind the point where the…

view full answer...

Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching