Parts Needed to Convert Trailer Connector of 2020 Ram 1500 to 5-Way
Updated 05/06/2020 | Published 05/05/2020
Question:
have a 4 pole on truck and trailer has a 5 point. looking at the adapter you guys have just want to make sure its the correct one..
asked by: Randy
0
Expert Reply:
Yes, the 4-way to 5-way part # 20036 that you referenced is the correct adapter you'd need to convert the 4-way of your 2020 Ram 1500 to a 5-way unless your truck has a 7-way as well. If you have a 7-way trailer wiring connector as well you'd just want the # A75TB for a much easier install as this just plugs right in and does't require any splicing.
expert reply by:
Jameson C
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can a 4-Way Trailer Connector be Plugged Into a 5-Way Vehicle End Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring New 4-Way Connector on Trailer with 5 Wires
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Recommended Disc Brake Conversion Kit for 5200-lbs Lippert Axles with 6 on 5-1/2 Bolt Pattern
- Q&A: How to Identify Correct Replacement Bearings and Seals for Boat Trailer
- Q&A: How to Add 5-Way Wiring Connector to a 2024 Toyota Grand Highlander With Factory 4-Way Connector
- Q&A: Trailer Plug is a 4-Way Flat But there are 6 Wires
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure for Trailer Hitch Drop
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)