Ford  x   >   F-350  x   >   Weigh Safe  x   >   Rear View Safety  x   >  

Will the pins labeled for the 10k and 14k hitches work with the 21k hitch for 3” receivers? | The B&W Tow & Stow 3-Ball Mount only needs one hitch pin lock, part # WS05 if you have a 5/8" hitch pin hole. The reason for this is that the hitch...

Which adjustable ball mounts will work with the 2.5inch rocktamer for a 2017 Ford F350 Dually? | Yes, the RockTamers Mudflap part # ERT00110 would be compatible with the The WeightSafe 2-1/2 inch ball mount # WS6-25. We had a customer come...

I know this has been asked before, but is there any update on any louvered tailgate manufacturers including Stromberg if they can fix their tailgates for cameras? Heck, this is the USA where we are supposed to be the best in the world for engineers...

2017 Ford F-350 with 3inch receiver . will # DTALBM6825-3S work with the ford provided 2.5inch reducer . Thanks | I spoke with my contact at Fastway regarding the Self-Locking Adjustable 3-Ball Mount 2.5 Inch # DTALBM6825-3S referenced in your...

Is this measurement the inside or outside of the receiver tube? My 2017 F350 Platinum has a receiver that measures 2 1/2inch x 2 1/2inch inside the tube and 3x 3inch on the outside. | The Weigh Safe 180 Hitch 2-Ball Mount # LTB8-3 referenced...

what is the overall length of the shank for a 6 hitch so i can figure out the ground clear clearance when hitch is installed also what is the measurement from the hitch pin to truck side end will it clear my factory spare tire on a 2019 Ford...

do see a adjustable hitch that will fit 2017 f350 has a 4inch hole | We offer adjustable ball mounts for both 2-inch and 2-1/2-inch hitches, such as the 2-1/2-inch Class V hitch from Curt # C15802, which fits your 2017 Ford F-350 pickup. The...

What size ball is on this mount? | The Rear View Safety Monitor Mount # RVS-Mount uses a 1" ball. |

Can you tell me about the 2 camera system with display on price and any flyer you have this will be installed on a Forklift Hyster 155 LP Gas 24 volt one camera mounted on the front and one on the rear preferred is hard wired with brackets and...

I am looking at the Furrion side camera system with 7in monitor for my new 2020 Jayco Redhawk 24B. My unit has no marker lights . How would I install? Actually how would my installer install and where? Do you have another camera option you recommend...

Can you recommended a front bumper mounted and rear camera setup to assist with navigating trails? Ive a 2021 f350 7.3l with sync4. If theres nothing compatible with sync4 system then Im fine with purchasing a separate monitor that can switch...

will the Rampage back jup camera work with my Android phone | I do have an option for you but the Rampage Wireless Backup Camera for Smartphone or Tablet part # RA7710 is for IOS (Apple) only so it will not work with Android. Instead, I recommend...

Will this fit my Haloview Byte Tango 7, 7inch monitor? | The Rear View Safety Flush Mount for 7" Monitor part # RVS-421 is designed for the Rear View Safety Backup Monitor part RVS-6137N which measures 7" long x 5-1/4" tall x 1" deep. Unfortunately,...

Is there a back up/towing camera that integrates with the Ford 2015 F-350 in dash monitor? We have to remove the tailgate w/ backup camera when traveling with our truck camper and trying to avoid adding an additional monitor. | As long as the...

Hello..I have a 2010 f350 with a camera in the tailgate and camera shows in rear view mirror. Im looking for a camera I can put on my camper and connect to my existing Ford monitor on my rear view monitor. Thxs! | You can potentially use an...

I have a 2016 Ford F350 diesel with a 2 1/2 inch receiver. My main trailer I will be towing is a 3 horse slant with a empty weight close to 4000 pounds. The measurement from level ground to the bottom edge of the trailer coupler is 17 1/2...

I have a Diversi-Tech 2 inch ball mount with a 2.5 inch sleeve i used in my Denali. I recently bought a Ford F350 which is a 3 inch sleeve. Is there a sleeve that I could use to make the hitch work for me? Currently, I am using the 2.5 inch...

I am looking for a locking hitch pin for a 3inch hitch. The only one I can find on your site is the one made by Weigh Safe. I have their hitch now and it is quality but the hitch pin looks a little light weight. Do you have any other products...

do these fit a 2017 F 350 | I did some checking and the 2017 Ford F-350 pickup models use a W21W reverse light bulb. It is similar to a 3156 but not the same so I do not recommend # HM20101VA for your truck. But I do have another option that...

I have a 2019 f150 short bed with a leer hard shell. It is wired with a 12 volt cigarette adapters in the rear. Could this heater be wired to plug in to a cigarette adapter. In 10 to 20 degree outside temperatures, what could I expect this...

I have a 2016 Ford F-350 dually and a 2017 Sandpiper 42ft fifth wheel. Wanting to install rear backup night vision camera on camper. Thought the trailer tow quick connect/disconnect kit to a Randy McNally GPS or Good Sams GPS monitor for inside...

Is there a quality Mirror Monitor that would work with this system? After installing a bedcap, the mirror view is blocked and it would save space. | Since the camera of the WiSight systems like part # ASA37YR is designed to go on the rear of...

Is there a RV Camera system that will work thru my 2017 F-350 Factory Radio screen? It currently has a truck backup camera on the tailgate and that is all. | There is absolutely a camera system that will work with the factory monitor on your...

Hello Interested in using the 4 camera system. Application is for one camera mounted on the front for parking, leaving ally ways with blind viewing from driving position angle of view I assume for the two stock cameras is the same, correct...