Where Does the 4-Flat Connector from Wiring Harness # C56039 go on a 2010 Mitsubishi Endeavor
Maybe it will be evident after I open the car up, but is there a slot to fish the wires from inside the vehicle to the undercarriage? Documents only describe connection inside the car. | There may be an access point to fish the 4-flat connector...
How to Test if Bargman Molded Trailer End 7-Way Will Have Same Connections
Hello, I am replacing a Bargman 7 way trailer end on my Rpod with a new Bargman 54006-010 Heavy-Duty Cold Weather Insulated 7-Way Molded Trailer End with 8 foot Cable. Is it likely that the color coding for the wiring will be the same since...
2006 Mitsubishi Endeavor Trailer Hitch Compatibility with Other Model Years
Will a 2008 Mitsubishi endeavor receiver hitch fit on a 2006 ? | If you have the Curt # 13113 on your 2008 Mitsubishi Endeavor, it will be compatible with a 2006 model. This hitch will fit 2006-2011 model years of that vehicle. I've attached...
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
Replacement Hardware Kit for Trailer Hitches
Hi I have a 2008 Mitsubishi endeavor installing hitch looked under it missing the bolts all of them I guess someone removed the hitch and never put bolts back in question do you sell the hardware kit for it | Yes, we offer the Replacement...
Installing Hopkins Wireless Backup Camera HM50002 in 2005 Mitsubishi Endeavor
I have an 2005 mitsubishi endovor can I install this unit | The Hopkins Smart Hitch Backup Camera # HM50002 will plug in on any vehicle that has a 7-way trailer socket with a round U.S. Car plug-in connector at the rear. The photo I linked...
Recommended Trailer Brake Controller For 2004 Mitsubishi Endeavor
Do you have an instructional video on installation of trailer brake controller on 2004. Mitsubishi endevor | I have included a video of a trailer brake controller being installed in a different vehicle, but we have not had the chance to install...
Brake Controller Option for Towing Camper with Several Different Vehicles
I need to tow the trailer with the electrical braking with several vehicles and od not want to install a control unit in each vehicle. Can I install the control in the trailer itself? It is a camping trailer with its own battery so I have...
Brake Controller and 7-Way Recommendation for a 2004 Mitsubishi Endeavor
I emailed quite some time ago about which parts are needed to install a brake controller and 7-pin wiring harness on my 2004 Mitsubishi Endeavor Limited. The vehicle came with the towing package and am currently towing with my 4 pin that came...
Will Yakima SkyBox NX 16 Cargo Box Interfere with Opened Hatch on a 2013 Infiniti FX37
Will this fit my 2013 Infiniti Fx 37 without hatch interference? | To determine if the Yakima SkyBox NX 16 # Y95AV will cause any hatch interference on your 2013 Infiniti FX37 there is one important measurement needed. First, if the roof rack...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
What Trunk Mounted Bike Rack Do You Recommend for a 2013 Infiniti FX37 while on the Highway?
Which trunk rack will be the best to carry 3 bikes and drive in the highway. Is there such a thing on speed restrictions with trunk rack? | If you are planning on transporting three bikes on on a trunk rack, there is no speed restrictions with...
Do I Need to Lower Exhaust on 1999 Volkswagen Jetta TDI in Order to Install Curt Hitch 11070
I was just curious if i am going to need to lower the exhaust on my 1999 jetta tdi | In order to install Curt Hitch, part # 11070, you will need to undo the exhaust, probably just at the rearmost rubber hanger. This will provide some room to...
Can the Pro Series Solo Steel Cargo Carrier be Used on a 2010 Mitsubishi Endeavor with 2 Inch Hitch
Although this item is rated for 400 lbs, can I still use this product with my Class 2, 2 inch hitch on my Mitsubishi Endeavor as long as I keep my load under the 350 rated tongue weight? | As long as you keep the total weight of the carrier...
Troubleshooting Brake Light Issue with Modulite Wiring # C59496 on a Mitsubishi Endeavour
I installed the C59496 wire harness kit for my 2010 Mitsubishi Endeavour. I then connected my camper trailer. The running lights and blinker work. However, the brake lights are always on...on the trailer. I disconnected reconnected everything...
Trailer Hitch and Wiring Recommendation for 2007 Mitsubishi Endeavor
Good afternoon, I am contacting you today because I am getting out if the military and moving back home. I drive a 2007 Mitusibushi Endeavor. I am Interested in a 2 in receiver, and the 4 pin flat trailer light hook up. With a Max tow weight...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
Bolts Provided with Hitch Will Not Fit in Nuts Welded Into Vehicle Frame
Bolts seem to not fit.. Seems to be too big for the holes in my vehicle. Dont know if wrong size bolts were sent or what bt my question is what size bolts are required for a 2005 Mitsubishi Endeavor trailer hitch? | Your Curt # 13569 Class III...
Hitch and Wiring Installation on 2008 Mitsubishi Endeavor
trailer hitch instalation and wiring harness | For the 2008 Mitsubishi Endeavor, I would recommend the Curt Class 3 receiver hitch, part # 13113. To provide lighting for your trailer, we recommend the 4 Pole Harness and Hardwire Kit, part #...
Do I Need To Lower My Muffler To Install This Hitch?
I have a 2008 Mitsubishi Endeavor I want to put a hitch on it but my muffler is directly or almost directly blocking one of the hose for the hitch do I reroute my exhaust or do you make a hitch that goes around it what to do | Hello, We have...
What Size are the Bolts for Curt Trailer Hitch, # 13113 for a 2006 Mitsubishi Endeavor
what size are the mounting blots for the mitsubishi endeavour? | The bolt sizes for the Curt Trailer Hitch, # 13113, can be found in the instructions. I have included a link to the installation instructions and a video install below. |
Will Curt Hitch Fit with 2011 Mitsubishi Endeavor LS
Im looking at a hitch for my 2011 Mittsubishi Endevor LS I think I need a Curt 13113 can you verify this for me. My muffler should have to be dropped to mount properly. | Yes, the Curt Trailer Hitch Receiver # 13113 is what you need for your...
Does Malone Roof Rack MPG216 Fit 2005 Mitsubishi Endeavor
Your add claims that Air Flow 215 fits the 2005 Mitsubishi Endeavor. I have tried cross bars said to fit the slot, and have looked at dimensions of others that are clamp fits. The cross bars in-slot mount fixture was 1/2 inch and my slot was...
Parts Needed to Add 7-Way to 2004 Mitsubishi Endeavor With 4-Way
Hello, I have a 2004 Mitsubishi Endeavor, and im looing to haul a 2009 Rpod 174. I need to upgrade my current 4 way wiring hook up ro a 7 way hook up that can withstand the amount of voltage needed for the brake light system of the Rpod. Could...
Filter Your Search
Contact and Help