Do Slipper Springs Come With Suspension Bolts
So I have a trailer that Im building and Im looking for the hardware that mounts the leaf springs to the trailer, I wasnt sure if the leaf spring came with it or not. | Slipper springs like the # SP-177275 and # SP-179275 include the nylon bushings...
Replacement Bearing Kit For Idler Hub 5 On 4.5 With 1 Spindle and 1.24 Inner Diameter Grease Seal
I have an old homebuilt trailer that Ive had for 8 years and Im not the original owner. The hub is 5 on 4 1/2, but Im not able to read the number off the outer bearing as it is so faded. I did not pull the seal or inner bearing. The bearings...
Recommended Hub And Drum for Electric Brakes With 4 On 4 Bolt Pattern For 1973 Scamp Trailer
Question about trailer brakes. I want to add electric brakes to a 75 Scamp that has 13 inch wheels 4 on 4. Your product descriptions are very complete, helpful! But I can not find any hubs for 4 on 4 except the 7 inch. The ten inch brakes...
Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
On a Dexter 5 on 4 1/2 Hub, should there be a washer between the axle nut and the outer bearing? On all other trailers and cars there is a washer, none on the Dexter trailer I have, just a large nut that covers the whole bearing. | Yes, there...
Can Standard Shackle Bolts Replace Stepped Shackle Bolts
my shackle bolts are stepped, i want to replace them do i need to use stepped bolts or can i use the 9/16, 3inch bolt? | The Step Wet Bolt # 34007-187-00 is a 9/16-inch diameter overall and 3-inches long. The threaded portion is a smaller 7/16-inch...
Replacement Parts for 2013 Shoreland'r Boat Trailer
I need to do bearings on my 2013 shorelandr boat trailer serial#517080. Can you point me to the correct items I need: Midwest Industries 4440170 ROLLER BEARING 1 3/8IN Midwest Industries 4440160 ROLLER BEARING 1 1/16IN Midwest Industries 4410130 SEAL...
Drum Brakes with Parking Brake for Timbren Heavy-Duty Axle-Less Trailer Suspension ASR35HDS02
Can you help me pick the appropriate hubs if Im trying to use an emergency brake? | With the Timbren axle-less suspension system # ASR35HDS02 you can install 5-bolt electric drum brake assemblies like # 23-112 and # 23-113. These are left- and...
Recommended Nut and Washer for Use with the Brake Mounting Flange part # 4-44-1
i need the nuts for the 3inch axle mount 5 stud brake mounting flange. what is the number or do you have them. also you should have relative parts listed so we can find them or even be reminded to buy them. Oh and do I need washers too? |...
How to Determine Axle Placement on a Custom 5 x 9 ATV and Motorcycle Trailer
Hi, I am building a 5x9 atv/ motorcycle trailer by emulating an 80s Cox 4x8. The axle was centered on the Cox and so assuming thats ok for the new one. I saw the math equasion shown here but its a little over my head, most small trailers I see...
Recommended Replacement Hydraulic Drum Brakes for Tandem Axle Trailer
I have two 2500 lb axles on my boat trailer. The diameter of the axle is 2 inches. Bolt pattern is 4. drum diameter is 10. 14 inch tires. I dont find brake assemblies with this criteria in your inventory. Should I just use those listed in the...
Matching Nut for a 7/16 Inch Brake Mounting Bolt
what nut goes with this bolt and to whoever listed nuts on your site you might let them know they have sizes and should be listed instead of wasting my time telling me it goes to a freeking 10inch brake. | For the 7/16 inch bolt # 7-116 you...
Replacement Slipper Spring for Boat Trailer 1000-lb Axle
The spring that I took off of the trailer measures about 25 and 1/4 inch. and 1 and3/4 in. wide, The bolt hole measures 1/2 inch had a 1/2 inch bolt. This looks like the 24 and 1/4 inch slipper spring for 1000 lb axle. It says that the bolt...
What are the Proper Components Needed to Install the Leaf springs On a Trailer
Trailer Leaf Spring, 2250 lbs. 6 Leaf - Code: e27SR wanting to purchase above item, what hardware do i need to complete proper installation?? | Building a single axle trailer you will need the following items to install leaf springs. I have...
3,500 lb Axle And Leaf Spring Setup - What Parts Do I Need?
Hello, I looking for 2 3500 axles with brakes and spring kits with sizes: 95 hub, 76 spring center to spring center. Are you able to help me with that? | We can set you up with all of that. We do offer a 3,500 lb 95" hub face axle # e68GR....
Replacement Hub Components For Drift Boat Trailer With BTR Spindle
I ordered a replacement hub from etrailer.com for my drift boat trailer a year to two ago. I need another. Do you have records of prior purchases so I know I am ordering correct part. | I do see you previously purchased the Easy Grease Trailer...
Replacement Leaf Springs, U-Bolts, Shackle Straps, and Hardware for Three 7,000 Pound Trailer Axles
I have already had to replace one leaf spring myself, 2nd replaced a couple months ago and now another has snapped. Seems finding local shops to get replacements are near impossible. Year: 2006 Make: KZ Model: 41-CKS Escalade Sportster Triple...
Replacement Trailer Suspension Shackles, Equalizers and Bolts
I have a 2006 Keystone Cougar 5th wheel, I would like to purchase a equalizer replacement kit with new bolts, equalizers and shackles. The equalizer I have has a number stamped on it EQ-356 and the spacing between the two bottom holes is from...
Replacement Hub Assembly For 2003 EZLoader 3-EZB 12-14 Boat Trailer
Hi, I want to replace my Hubs on my 2003 EZLoader 3-EZB 12-14 1000 Boat trailer.It has 5 x 4.5 Hubs I believe.Do you have a complete greased Hub all assembled that would work for me preferably Galvanized. Thanks | I recommend the Galvanized...
Is Grease Required For The Slipper Spring Bolts Of The Roadmaster Comfort Ride Suspension Kit
Im going to be installing the Roadmaster Comfort Ride Slipper Spring system on my 2021 Grand Design 310-GK. Ive watched the install video you guys created, and noted that when attaching the slipper spring to the fixed shackle on the RV, the...
Parts Needed to Install Electric Trailer Brakes on a Pop-Up Camper
Hi, Id like to install brakes on this pop-up camper. It did not come with brakes but it was an option and it already has the 4 hole flange on the axle. It currently has 20.5x8x10 tires and each wheel has 5 holes. Am I correct in thinking that...
Replacement 7-3/4 Inch Equalizer and Heavy-Duty Suspension For Tandem Axle Trailer
I have a 1995 Ranger boat and the trailer has started giving me a puslating feeling around 70 mph. I noticed the tires have begun to wear strange as well. It’s a tandem axle trailer and I noticed the springs have touched the frame. I removed...
Hi guys, theres a flat washer in my trailer bearing pack Im not sure exactly where it goes it looks like it goes somewhere with the inner bearing is it between the bearing and the seal, any ideas please | I was unable to find an order number...
Height of Equalizer in Tandem Axle Hanger Kit APT5 and Replacement Shackle Straps
Hello, I am looking to replace the shackle straps on my trailer and thought to replace the equalizers at the same time. I wanted to know what the height is from bottom hole to top hole for the equalizer in APT5 kit. Below are the dimensions...
Replacement Shackle Strap Recommendation that is 3-1/2 inches Long
I need a shackle | Your question came in blank, but based on the picture you submitted it looks like you are in need a replacement shackle strap that is 3-1/2 inches in length. For that you would want the Shackle Strap # TRSL225. This strap...
Filter Your Search
Contact and Help