Is Grease Required For The Slipper Spring Bolts Of The Roadmaster Comfort Ride Suspension Kit
Published 09/27/2023 >
Products Featured in This Question
Question:
Im going to be installing the Roadmaster Comfort Ride Slipper Spring system on my 2021 Grand Design 310-GK. Ive watched the install video you guys created, and noted that when attaching the slipper spring to the fixed shackle on the RV, the installer says the new spring has a nylon bushing, which should not be greased. He reuses the wet bolts from the old setup after cleaning them of all grease, to prevent deterioration of the nylon bushing. If thats true, Id rather not re-use the wet bolts, as that could create later confusion that those bolts should be greased, when thats not correct. Are the bushings on the new slipper springs nylon? And if so, what non-wet bolt should be used to attach them to the fixed shackle on the RV?
asked by: Kirk D
Expert Reply:
The bushings for the slipper springs in your Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles # RM-2460-2570 would not need grease so you can definitely swap out the wet bolts with some standard bolts like part # 166081.
Product Page this Question was Asked From
Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Leaf Spring Replacement System
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 7000 lbs
- Round Axle - 3 Inch
- Tandem Axle
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: road master comfort ride
- Search Results: trailer suspension parts
- Shop: MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: reese gooseneck ball
- Search Results: reese goose box
- Search Results: roadmaster shock kit
- Search Results: wheel covers hubcaps
- Search Results: roadmaster shocks
- Shop: Dexter Bronze Bushings - Qty 4
- Q&A: Adding MORryde X-Factor to 2023 Grand Design Reflection 337RLS With Roadmaster Comfort Ride
- Shop: MORryde U-Bolts for 5,200-lb to 7,000-lb Round Trailer Axles - Qty 4
- Q&A: Is the Comfort Ride Leaf Spring Suspension Kit Compatible w/ MORryde X-Factor Crossmembers?
- Q&A: Does the X-Factor Crossmember for Standard Frame Hangers Require Longer Suspension Bolts?
- Video: Feature Review Lionshead Trailer Wheel Center Cap w/ Snap-In Plug
- Video: Review of Taskmaster Wheel Covers Hubcaps - Stainless Steel Center Wheel Caps - TA46QR
- Shop: Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 4.25" Pilot - Stainless Steel
- Shop: Americana Trailer Wheel Center Cap - Stainless Steel - 4.25" to 4.27" Pilot
- Shop: Bronze Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long - Qty 1
- Shop: MORryde GooseTech 5th Wheel to Gooseneck Pin Box for 14K to 18K Trailers w/ Lippert 1621
- Q&A: Can MORryde X-Factor Crossmembers Be Used With Roadmaster Comfort Ride System?
- Video: The Low-Down on the Dexter Shackle Bolt for Double Eye Springs
- Video: In-Depth Review of the Shackle Bolt for 1-3/4" Wide Double Eye Springs
- Q&A: How Do I Determine What Crossmember And How Many To Install On My 2025 Grand Design
- Q&A: Can I Install Just One MORryde X-Factor Crossmember Or Do I Need All Three?
- Q&A: Can MORryde Crossmember be Used with Roadmaster Comfort Ride System
- Video: Setting Up Your MORryde Standard Frame Hanger X-Factor Crossmember - 2018 Grand Design Reflection Fi
- Video: MORryde X-Factor Crossmember for Standard Frame Hangers Feature Review
- Video: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs: The Breakdown
- Article: Double-Eye Trailer Suspension System Review
- Article: Slipper Spring Trailer Suspension System Review


