Recommended Base Plates for 2003 Ford Ranger with Roadmaster Tracker Tow Bar
I like the Roadmaster Tracker Tow Bar - 2inch Ball - 5,000 lbs Item # RM-020. I have a ranger and want to leave the bar on and lock it in the up position when I detach. What other products do I need to permanently attach it to the truck | ***emailed...
Recommended Winch Mount for a 2018 Polaris Ranger XP900
Is this Super winch model Sw1145230 universal? I have a 2018 Polaris Ranger XP900 that I would be mounting it on and am curious if this will take a special or additional mounting bracket for this UTV. | Yes, it is! The Superwinch Terra Series...
Can Roadmaster Tow Defender be Used with Roadmaster Direct Connect Base Plate Kit
I am interested in the roadmaster defender. I don’t see a modification for the direct fit base plates, but maybe you have one that I don’t see. It appears to be a adapter and one could easily fabricate an adapter that would match up to the direct...
Tow Bar Wiring For 2020 Ford Ranger & Is Brake-Lite Relay Needed
I have a 2020 Ranger Lariet. Want to find out exactly what I need to wire it up to be towed. My ranger truck has yellow turn signal lights. I plan to install RVI3 brake system. This cause brake lights to activate anytime brakes are applied...
Determining Correct Replacement Cover For Extang Tuff Tonno Tonneau Cover On 2006 Ford Ranger
Hi, I have a 2006 Ford Ranger extended cab. I need a replacement tonno cover for the one I currently have on my truck. The current one is an extang Tuff Tonno III. I see two on your website EX 13940 and EX13630. Which one is correct for my...
Do All Wires on 4 to 7-Way Trailer Connector Adapter Need to be Connected for Trailer Lights to Work
Hi I have a 2003 ford ranger FX4 level 2 it came with a reciver and a flat 4 way plug, but I have always needed something more. So I went down to the local discount store ant bought a seven way plug that has a four way flat on the side. Well...
Does The 2011 Ford Ranger have Brake Controller Port Underneath Dash
I have a 2011 Ranger [Canadian spec] 4L auto.with a factory hitch and 4way. Do I have a plugin spot for a brake controller like larger pickups have under the dash area? | None of the 2011 Ford Ranger models came equipped with a factory brake...
Is The Blue Ox Ascent Tow Bar Compatible With Curt Baseplates
Is this compatible with blue ox ascent tow bar? | Yes, Blue Ox tow bars, like your Ascent # BX4375, are compatible with Curt baseplates like the Curt Custom Base Plate Kit # C64ER. If you haven't picked out the rest of your flat towing components...
How To Wire Third Brake Light on Leer Camper Shell to Ford Ranger
I have a 2010 Ford Ranger to which Ive added a leer camper shell with a third brake light. What do I need to correctly wire this. The Ranger has combined brake tell and stop on a single bulb. | The 3rd Brake Light Logic Module part # PP20-702...
Recommended 4-Way Wiring Harnesses for a 2007 Ford Ranger w/ and w/out the Tow Package
I have a 2007 ford ranger and I am gonna install the Curt 55515 trailer connector does the ecu need to be flashed? | Installing the Curt T-Connector Vehicle Wiring Harness item # C55515 will not require you to flash the ecu on your 2007 Ford...
Trailer Wiring Harness for a 1995 Ford Ranger
This item is listed as a confirmed fit for my 1995 Ranger. Since it does not have a converter, as some other trailer wire harnesses have, is any additional wiring or splicing required? My Ranger has the original tailight connectors to tap in...
What Type of Zinc Plating Does the Erickson E-Track Have
your e-track is listed as zinc coatedinch is that hot galvanized, zinc plated or zinc paintedcold galvanized ? | I spoke to my contact at Erickson and they informed me that the E-Track like part # E19148 is zinc plated. I attached a review...
Trailer Hitch Receiver and Wiring Harness For a 2000 Honda S2000
Hi, Im interested in the S2000 hitch C11198 but it says that it only fits 2004 - 2009 S2000s. Do you guys have one that will fit a MY 2000 S2000? Thanks | The Curt Weld-On 2" Receiver # E17 will allow you to have a receiver custom fabricated...
Do 1996 and 1998 Ford Rangers Share Common Class II and Class III Trailer Hitch Fits
Im wanting to buy a used hitch for my 96 ranger, and found one off a 98, will it fit our should I keep looking? | Hitch fits for the 1996 and 1998 Ford Ranger are the same as long as the 1996 Ranger is NOT the GT version. For the GT version...
Will a TruXedo TruXport Tonneau Fit a 2008 Ford Ranger with Bed Liner
Im wondering if a plastic in box liner would interfere at all with the rail installation? | Yes, the TruXedo TruXport Soft, Roll-Up Tonneau cover, # TX250101, will install on your 2008 Ford Ranger with an installed bed liner, but you will...
Replacement Key For Storage Door on 2006 Coachmen Class A Motorhome
I have 2006 sport coachman class A diesel, no outside storage door key. The handle has 315 stamped on it and above the handle the letter M or W depends on which way your looking at it.will this key work? | If the latch looks like the # 295-000015...
Will Two Thule Insta-Gater Truck Bed Single Bike Racks Fit in the Bed of a 2004 Ford Ranger Edge
I have a 2004 ford ranger edge - stepside bed. Will two of these fit side by side??? I have two bikes and i need a carrier. | The Thule Insta-Gater Truck Bed Single Bike Rack, item # TH93VR, is 18 inches wide and requires 20 inches of space...
Availability of U-Bolts that Could Fit 3 by 5 inch Frame
I need to replace u-bolts on my boat trailer. Its rectangular frame, 3” x 5”. The inside measurement of the bolts needs to be able to slip over the 3” wide frame and be about 7” long on the threaded parts. What do you have? | Best option...
Does Curt Class III Trailer Hitch C13417 Include Installation Hardware
Does this hitch come with the bolts to install? If, not what size of bolts and nuts are preferred? Thanks | The hitch doesn't include hardware because the necessary hardware is already on the truck. The Curt Class III hitch you refer to, part...
1996 Ford Ranger Trailer Wiring Harness Installation
I purchased and installed the light kit for my Ford Ranger pickup. I installed it, and it worked well with a test light. The instructions say to mount the module in the trunk or a location protected from weather. Thats hard to do under the back...
Fit of Classic Accessories UTV Seat Cover # 052963783773 on 2011 Polaris Ranger 4x4
Will this seat cover fit a 2011 Polaris Ranger 4x4? | According to our contacts at Classic Accessories, the UTV Seat Cover, part # 052963783773 will fit your 2011 Polaris Ranger. |
Recommended POwerTraxPRO XR Tonneau Cover For A 2023 Ford Ranger Raptor
Does the Retrax Powertrax Pro XR fit 2023 Ford Ranger Raptor ? As the wheel tubs are longer. | Yes, the PowerTraxPRO XR is a fit for a 2023 Ford Ranger Raptor, but the # RTX88FR model you were looking at is designed for a 5' bed and the Raptor...
Replacement Vinyl Cover for Extang Black Max Tonneau Cover on 2001 Ford Ranger w/ Step Side Bed
Can I buy the Extang cover without the frame? | We do indeed offer a replacement vinyl cover for your 2001 Ford Ranger with the 6 Foot Stepside bed. The part # is # EX1600 is the replacement for your Extang Tonneau # EX2600 |
Will Curt 7-Way for 2021 Ford Ranger Work with Boat Trailer with Surge Brakes
so im about to buy a boat with electric trailer brakes. i was told i dont need a brake controller installed that with the 7 way it is all electronically controlled by when i just hit the brakes. so i was wondering if this plug would work with...
Filter Your Search
Contact and Help