Result:

Articles

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Trailer Wiring Recommendation for 2006 Mazda Tribute That Doesn't Require Finding Relay Location

I saw on a post it said the relay would have to be installed in a block behind the dash please explain | While I have a much easier trailer wiring solution than the # 40455 that you referenced for your 2006 Mazda Tribute there is a good chance...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Recommended 4-Way Wiring Harness and Connector for a 2005 Mazda Tribute

I have a 2005 Mazda Tribute with a 4-pin harness plug that has a rubber sleeve that mounts into a metal bracket. The plug is intermittent, and I need to replace it. I can send a photo of the plug. I want to know if you have this type of...

Can a Taillight Converter Module Go Bad After Working Properly for Months

Is it possible for the Circuit Protected Modulite Powered Taillight Converter to go bad? I installed this several months ago and now it does not work. Using a test light, all circuits work beforeinch the converter, but nothing works afterinch...

Does DG52720PB Come in Chrome

I’m looking for a rear light that is 10” x 4” , do to show or can direct me in the right direction, also does this “ DG52720PB- LED Trailer Light w/ Reflector - Brake, Tail, Turn - Surface Mount - Rectangular - Red “ come chrome | Hey Sam! Great...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

How To Wire 6-Way Square Connector on 2000 Viking Popup to 2001 Mazda Tribute With 4-Way Flat

Is there a ready made connecting harness between 2000 Viking popup 6-Way square and 2001 Mazda Tribute 4-Way flat? I do not need anything other than lights so the six way is not necessary. Thanks. | I do have a few solutions to wire your 2000...

Items Needed to Tow a Trailer with a 2011 Lexus RX350 Without Tow Package

I bought a 2011 RX350 Canadian version that was not ordered with the tow package. What do I need to install to properly tow our 2500 lb boat? | To tow your boat trailer with your 2011 Lexus RX350, you will need a trailer hitch, wiring harness,...

Which Fuse of 2005 Mazda Tribute with Tow Package for Activating Circuits

I have a 05 Mazda tribute with the towing go plug in need to know what fuse I need to make it work or relay and where does it go in fuse box | From customers we've learned that the fuse slot number 1 is the one associated with activating the...

Replacement Top Channel Cover For Thule Aeroblade Load Bars

I see the replacement strip for the Aeroblade is listed at only 59. Is there a different part number for the ARB60? | The Replacement Top Channel Cover for Thule AeroBlade Load Bars - 59" Long - Qty 1, # 852-5402-005 is the correct part for...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Trailer Wiring Harness for a 2008 Mazda Tribute without Factory Tow Package

Have bought your 118251 only to find my car does not have relays and is not wired for relays. Can I buy the other parts I need to make my 1 18251 into your 118551 Thanks | If your 2008 Mazda Tribute did not come with the factory tow package...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Roof Rack for 2005 Mazda Tribute With Raised Side Rails for Rooftop Tent

Hello. I have a Mazda Tribute 2005 and i would like to put a roof tent in there. I only have the original racks and i dont know if changing them would be ok or i would be still on risk? Another company told me even changing them is not safe... Thank...