Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
What Hitch Will Fit On My 2024 Land Rover Evoque Dynamic SE
Good afternoon, I would like to know if part DT45JR trailer hitch fits a 2024 Evoque Dynamic SE | Thanks for your question, Sal! I double checked with Draw-tite for you and they don't exclude any trim package options for the Evoque so hitch...
Recommended Trailer Hitch for 2017 Land Rover Evoque HSE Dynamic
I will install whatever hitch I choose on my 2017 Range Rover Evoque HSE Dynamic. The Dynamic trim level includes what RR calls Dynamic Body upgrades, and while Im not sure, I think my rear fascia extends further under the body than the model...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Trailer Hitch and Wiring for 2009 Mercedes R320 Diesel
I have a 2009 mb R320 diesel w251 . The information on the web site indicates the class 2 trailer hitch and separate wiring packages are for a r350 MB the wiring package is with brake controller and 7 way. Can to clarify the correct products...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Diagram of the Portion of the Fascia that Needs Trimmed to Install Curt Hitch # C13103
do you have a sketch of how much to trim do you cut around hitch support bar ? | I attached a copy of the installation instructions for the Curt hitch # C13103 which is confirmed your 2007 Mercedes R350. The installation instructions have...
Should Radial or Bias Tires be Used for a 3500lb GVWR Pop Up Camper Trailer
Vehicle - 2011 Coleman Sun Valley pop up camper. Fully loaded - 3500lbs I cant seem to figure out which tire to get. It seems there is much debate on trailer tires, whether to get radials or bias ply. My stock tires are Kenda ST185/80D13-D and...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Is Cutiing Required for Installation of the Mercedes-Benz R350 Trailer Hitch # C13103
I would like to know if there is any cutting of the oem bumper required in order to fit your trailer hitches? | You will not need to cut the OEM bumper for installation of the Curt Trailer Hitch, item # C13103, for the 2008 R350 by Mercedes-Benz....
Trailer Hitch for a 2012 Mercedes R350 BlueTec
Will this hitch also fit the Mercedes 2012 R350 Blue Tech diesel model? Also, where is the best place to get the hitch installed once I buy it? I doubt that a dealer would do the work but I am afraid to trust non-Mercedes technicians, especially...
Location of Install Connector for Trailer Wiring on a 2012 Land Rover Evoque
Hi, I am trying to figure where the Land Rover Evoques wiring harness is. It seems to be located in the opening under the passengers side, to the right of the muffler. This opening is located under the passenger side at the rear of the car under...
Removal of Fascia on Mercedes 2008 R350 When Installing a Curt Trailer Hitch, Part # C13103
Once I get the facia off, I can install the hitch. Any tips? Ive removed the 4 bolts under the rear bumper. How do I get the rest of the facia off? CURT 13103 model hitch. | I spoke with my contact at Curt and he informed me that the underbody...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Hitch, Wiring and Brake Controller for 2016 Land Rover Evoque
I have a 2016 range rover evoque I need a hitch that would work with a 19 foot long bow ride boat | We offer three options in a 2-inch Class III hitch for your 2016 Land-Rover Evoque that can be seen on the linked page. The highest capacity...
Trailer Wiring Harness Fit for 2017 Land Rover Evoque
Hi there, I see that Item # 118624 fits 2015 range rover evoque but doesnt say it is not confirmed to fit 2017. Does this mean that it absolutely wont fit or it just isnt confirmed? I am confused because the end plug looks the exact same. |...
Does Kuat NV 2.0 Bike Rack Work With 2 Inch Draw-Tite Trailer Hitch Receiver
Hi, I recently bought a Draw Tite 2inch hitch Item # 75227 and had it installed on my 2013 Range Rover Evoque. Im looking for a bike rack and am considering the Kuat NV Item # NV22G. Is this rack compatible with the hitch I purchased?? Would...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
Ground Clearance of Curt Hitch Installed on 2008 Mercedes Benz R320 CDI
Is the car just too low for a hitch? | For your 2008 Mercedes Benz R320 CDI we have the Curt hitch part # C13103 as a confirmed fit. This will fit your vehicle will and will not sit too low at all. When we installed this hitch on a similar 2006...
Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath
Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...
Does The Curt Trailer Hitch For A 2018 Land Rover Evoque Require Trimming To Install
Hi. Will the 2018 Land Rover Evoque SE Premium require any trimming for C13128 installation? Thanks. | Yes, the Curt Trailer Hitch Receiver # C13128 would require trimming of both the heat shield and rear fascia in order to install. |
Does Curt Echo Brake Controller Work With 2021 Land Rover Range Rover Evoque
We have a 2021 range rover evoque and need to have a brake controller for the trailer. The 7 pin connector does not have the brake wire conneted or available. Will the Curt echo work without this wire literature states it will and if so assume...
How to Determine Which Replacement Axle is Needed for 1979 Avion Travel Trailer
I HAVE A 1979 AVION TRAVEL TRALER WITH 4 SEPERATE AXELS. THE SPINDEL IS BENT ON THE RIGHT FRONT AXEL, THEREFOR WEARING MY TIRE DOWN WITHIN 3,000 MILES. DO YOU HAVE ANY IDEA WERE I MIGHT PURCHASE AN AXEL? THANK YOU | In order to determine which...
Filter Your Search
Contact and Help