Recommended Trailer Hitch for 2017 Land Rover Evoque HSE Dynamic

Updated 06/16/2020 | Published 04/27/2018

Question:

I will install whatever hitch I choose on my 2017 Range Rover Evoque HSE Dynamic. The Dynamic trim level includes what RR calls Dynamic Body upgrades, and while Im not sure, I think my rear fascia extends further under the body than the model in your photos. So my question is, will I have to modify do any cutting the fascia? Have you done an install on a 2017 HSE Dynamic yet?

asked by: Fred O

Helpful Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver # 75227 referenced in your question is confirmed to fit your 2017 Land Rover Evoque HSE Dynamic model. I confirmed this with my contact at Draw-Tite.

When installing the hitch, you will need to trim the rear fascia and heat shield (approximately 3-7/8 inches wide by 1 inch high from the bottom of the fascia - see attached image). Because the custom hitch will use existing holes in the Land Rover's frame, you will not need to do any drilling.

I have attached the complete written instructions that you can also take a look at.

expert reply by: Chris R

click to enlarge

Jerry

6/13/2020

Looking to buy this trailer hitch for a 2016 Land Rover - Range Rover evoque. Do you know rough height of the trailer hitch. Looking to buy a small Yamaha boat with a shorelandr trailer and want to make sure the boat would be leveled.

Chris R.

6/16/2020

On your 2016 Land Rover Evoque the top of the 2" receiver for the Draw-Tite # 75227 will be about 12-1/2" above the ground. Keep in mind that even if it's not exactly level with the trailer you can make up just about any difference with the appropriate ball mount. I've linked a really good article on how to choose the right one below.

Helpful Links

faq-ballmount.aspx