Result:

Articles

Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire

I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Scooter Carrier for Rear of Motorhome With Rear-Mounted Spare Tire

What carrier will fit | The extended overhang at the rear of a motorhome means that any hitch mounted accessory installed in the hitch will be subjected to more jarring and bouncing than it would if it were instealled in a hitch on a standard...

Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer

I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed

can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...

How to Measure Ball Mount Rise for Draw-Tite Sportframe Ball Mount # 3594 on a 2002 Buick Regal

how do i determine ball mount rise | Ball mount rise, or drop, is determined by inserting the ball mount into the hitch on your vehicle and measuring from the top of the hitch opening to the top of the ball mount platform. I added a photo showing...

Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215

I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...

4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo

HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...

Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine

my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Recommendation For Flat Towing A 2011 Buick Regal 2.4L

I have a 2011 Buick Regal 2.4L. A friend has done business with etrailer in the past and said your the best. Can you provide a quote for everything you would recommend I use for a complete installation. The car has never been used as a dingy...

Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D

Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...

Exhaust Rattling Against Trailer Hitch on a Honda Pilot

Hi,I have recently bought a Curt receiver 13328. The installation went smooth but the hitch is touching the exhaust pipes. When I drive it makes a vibration noise. How do I fix this. | Exhaust rattling against a trailer hitch is a common occurrence...