Result:

I just went and got another pop up trailer b/c I needed two. Just got home and cannot get it off the ball. I tried cranking it and releasing the latch at the same time but as I crank, it is lifting the back end of the car along with the coupler....

I have tried to find which harness I need for my 2004 Ford Ranger, Edge, RWD, 3.0 which has a tow package and a 4 pin connector. I will be pulling a trailer that has a 7 pin oval connector, but your directions on your website are very confusing....

Which bolt on bumper hitch for a 2008 Ford ranger 4 x 4 4.0 L six-cylinder. | I recommend installing our etrailer Trailer Hitch Receiver # e29AR on your 2008 Ford Ranger 4x4 with the 4.0L 6 cylinder engine. The frame mounted receiver may require...

Can you put a ball on the rear of a receiver hitch cargo carrier to pull a light trailer? | We do have an easy solution for you to use a cargo carrier and tow at the same time, though you would not be able to put a hitch ball on a cargo carrier...

Hi I was looking at purchasing two curt products for my 2023 ford ranger. The first is the 7 way harness, my truck has the factory 4 pin trailer harness and plug but I wanted to know for the seven way would I purchase with factory tow package...

Hitch and wiirng for my 2010 Rnager please and thank you. | The hitch I recommend for your 2010 Ford Ranger is the etrailer Trailer Hitch Receiver # e29AR because it has a matte black finish that looks better and is more durable than the classic...

We have ordered a 118158 and a 38955 and have watched the installation videos in advance of receivine our converter and isolation diodes. The video talks about using the converter to convert a towed vehicle with seperate turn and stop lights...

will this part work for my 2007 ford ranger? I want to be able to rent a trailer requiring a 4 way flat end for the trailer side. is there a plug in trailer wiring harness that would not require any splicing? any suggestions, details appreciated. thanks...

1994 GMC K2500 / 1997 Ford Ranger primary tow vehicles I have this converter TowReady #118158 currently wired to my trailer I really wanted amber turn signals and very much like it, and would like to purchase another one but have a few questions...

Your YouTube video shows installation of part 118241 trailer connector on a 1999 Ford Ranger. Does this same part also fit a 2002 Ford Ranger. | The Tekonsha Tow Package Wiring Harness with 4 Pole Trailer Connector # 118241 is NOT a fit for...

Will the C58345 kit work to wire bed cap 3rd brake light on a 2021 Ford Ranger super cab? | The # C58345 4 pole trailer wiring harness wouldn't be a good option, as the brake lamps and turn signals are carried on the same circuit. If you installed...

T connector for 2009 Ford Ranger Do you make one? | We do have a T-Connector for your 2009 Ford Ranger. You will want the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM40655. It will install behind the...

What do you feel is best cargo trailer size for 92 ford ranger, extended cab, 4.0 liter engine. I know weight of unit is important with how much you can put in the cargo trailer. Any info. on sizeeg. 5x8, 4x6, 5x9 etc. would be appreciated. Note-...

i have a 2007 ford ranger that has a place to put a hitch ball in. i need a 2 inch hitch ball with a shank that will fit in the hole that was pre built by ford | I cannot make a accurate recommendation without more information. The thickness...

Dear experts, Trying to decide between to carriers, the FSTC1000301, or the DL22120. I would like to add a lock to one of these choices. I noticed possibly two locks, the 262DAT, and the FSTL0603. Do these locks work on both of the carriers,...

I was given a curt 13088 hitch from an estate sale. I would like to know if it will fit my 2007 ford ranger xlt. Thank you | For your 2007 Ford Ranger, I'd recommend the Curt Class III hitch, part # 13019. This hitch is reasonably priced, but...

I tow a 1997 ford ranger that is fitted with a flat 4 pin connector. My motor home has a 5 way round vehicle connector Can I back feed the 4 way flat connector on my truck and have brake lights etc wit out re wiring the truck to have these lights...

ANY trailer hitch for 2000 ford ranger stepside ? | I confirmed with my contact at Curt Manufacturing that their 2-inch Class III hitch part # 13138 is a fit on your 2000 Ford Ranger Stepside. The linked installation video illustrates the mounting...

will thes hiches all work on a step side truck? | Yes, the Draw-Tite Max-Frame, part # 75082, will fit your 2001 Ford Ranger Flareside. I attached installation instructions and an installation video of this product below for you to check out. It...

How much do you suggest for a receiver installed on a 2019 Ford Ranger. | I'm assuming you're wondering which ball mount you're needing. When installed, the receiver tube will be about 19 inches off the ground, given that the average trailer...

Dingy wiring, the RV has a combined 7 pin receptacle for towing. The dingy has separate brake and turn signals, amber turn, red stop. How do I go from combined to separate. | When installing tow bar wiring on a vehicle with separate brake and...

If I used this with a small cargo carrier while pulling a pop up camper would it work? I mean would I still be able to turn without the carrier making contact with the camper or battery box and propane tank etc. | Yes, you could definitely use...

What do I need for non led light | The Pacer Performance 3rd Brake Light Logic Module # PP20-702 you referenced is for a single LED light. It isolates the brake signal from the turn signal on combined wires. It works in the same way as the...

Does this hitch come with the bolts to install? If, not what size of bolts and nuts are preferred? Thanks | The hitch doesn't include hardware because the necessary hardware is already on the truck. The Curt Class III hitch you refer to, part...