Result:

Can you use this wheel on 9/16” studs? It’s hub centered and 5/8” holes. Since it rides on the hub, stud size should not matter, correct? My hub is .475” 9/16” studs. 7k Dexter axles. | No, it still matters Mike. The Hub-Piloted Solid Center...

Weird questions: is 10inch the inner diameter of the drums? Im trying to engineer a retrofit to a Volkswagen Vanagon being cut down to a single axle trailer. Id like to use the original VW bearings, hubs, and drums which have an inner diameter...

Since no 12 x 2 Warner electric brake parts are available I removed the Warner electric backing plate assembly from my 1960 Yellowstone travel trailer and it has a 6 bolt pattern for attaching the plate assembly. The lug pattern on the drum...

Hi, what lift kit would I need for a 2008 Jayco jay series 1206 pop up camper? Thank you | Hello again Nick. We may have a lift kit that will work for your Jayco 1206 pop up camper. I will need to know what kind of axle your camper is equipped...

Looking for a direct replacement for Atwood 84210 wheel cylinder kit. Can you point me in the right direction? I found one set, the real thing - exactly what I have, but need another pair. | The Atwood Hydraulic Braking Assemblies 84210 are...

Does it come pre greased ? | Hello Ed, thanks for reaching out. I checked with my contact at Curt and I was told the Curt RockerBall # C29FR does not come pre-greased, so you will need to add grease before initial use and install. A multi...

Ive got a 22 ft. travel trailer with 3500 lb. ALKO axles. Rather than the typical 10X2-1/4 inch brake shoes it has 10X1-3/4 shoes. As far as I can tell, the ALKO part number for these should be 1530114 for one shoe. Do you have these or...

Have 2001 Casita Spirit with Dexter Axle. Drums have 8-247 printed in raised letters on drum. Axle diameter is approx. 1.385 inches. Which grease seals will fit my trailer? | Sounds like you have the trailer hub part # 8-247-50UC3-EZ installed...

There seems to be conflicting information about the Echos compatibility with the 2019 Ford Ranger having the standard towing package with 7-pin connector. Is it or is it not compatible? If I order the Echo and it turns out to be not compatible,...

I would like to add brakes to a ShoreLander PT2321A pontoon trailer. What parts would I need. The trailer currently has no brakes of any kind. Thanks for the help. Here are the trailer specs: Minimum Hull Length: 240 Inches Maximum...

Hi there, Ive got a tandem flatdeck trailer with Dexter brake assemblies all around. During a recent routine check of my braking system I found that only 1 hub had any braking. Upon further checking I found that the hub that was braking Was...

Never worked with Nev R Adjust brakes before, over tightened them, now they are bound tight and are frozen to the shoe. How can you back them off? | If you can pull the hub off that is going to be the easiest way to adjust the brakes looser...

I have a 19 ft 2000 Fleetwood Mallard travel trailer. It weighs 4,125 lbs. empty. It has two axles, but the tags on them have faded so I cant read them. The brakes measure 10 inches. I have 15 inch wheels. Will this work on my trailer? And is...

My question is concerning a M416 military trailer. My intention are to change the hub and drum to get a 5x5 bold pattern. Thanks for your help! | Thanks for the picture! To determine the correct replacement hub to give your M416 military trailer...

Would like to install parts for my 2006 trailer. casita 17ft deluxe freedom brake kit RandL want to order kits for this trailer please advise part number needed. The Dexter axle model is 10H, The weight capacity is 3500 lbs. I would like manual...

I am looking at a new 7 x 12 which I haul mostly a golf cart. which set up would you recommend? 3500 single axel upgrade to 5200 axel or go tandem?? | If you are looking to primarily haul a golf cart, going with a single 3,500 pound axle should...

Hi my husband and I are looking for the complete replacement of a spindle, hub with sealed bearings and brake for a 2010 ranger trail boat trailer. Its a 10inch 5 lugs 4-1/2inch diameter. | The Dexter hub part # 8-247-50UC3-EZ that you referenced...

I have a ranger trailer that has a bad hub. Needing a hub that has a 13/8 bearing on both ends front and back need asap! | In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information....

I have dexter 10k lb axles on my trailer and am trying to find the proper nylon bushings for the leaf springs. They are 3/4” ID and 1” OD. Can you direct me where to find these? Thank you! | We have one bushing that matches the inner and outer...

What is the mounting bolt pattern? I know it is 4 bolt holes but need height and width center to center. | Great news, I was able to go out into our warehouse and measure the mounting holes on this brake assembly. The center to center width...

Im looking for Replacement hubs for old axles that have a 25580 inner bearing and a LM67048 outer bearing. I noticed that someone else asked this question on the page for the AKHD-655-6-G-EZ-K assembly and the reply said it wouldnt fit and said...

Hello - I have the Dexstar Conventional Steel Wheel - 16inch x 6inch Rim - 6 on 5-1/2 - Black Powder Coat, which has a 4.27inch pilot diameter. Is there a Hub/Brake assembly that would match up well with this wheel, being installed on a...

I have a custom made trail master trailer from around 1991-1993. I need a set off brake shoes. the drum stamping says 10.06. Would you be able to help me with the correct shoe? Thank you | We do have replacement brake shoes like part # AKBRKR-S-12...

Hello, I am fabrication a trailer that is 60 inches wide. Its a 5x10. I am planning on mounting 15 inch tires. The trailer frame is for a tear camper and will weight 1300lbs at most. can you recommend an axle that will fit the size of my...