Replacement Shoe Brakes Needed for a 1990s TrailMaster Trailer

Updated 06/13/2018 | Published 06/11/2018

Products Featured in This Question

Replacement Shoe and Lining Kit for 12" Manual-Adjust Brake Assembly - 5,200 lbs to 7,000 lbs

(129)

$69.97

Replacement Shoe and Lining for 4,400-lb Nev-R-Adjust 10" x 2-1/4" Electric - RH

(11)

$100.59

Question:

I have a custom made trail master trailer from around 1991-1993. I need a set off brake shoes. the drum stamping says 10.06. Would you be able to help me with the correct shoe? Thank you

asked by: Joe C

Expert Reply:

We do have replacement brake shoes like part # AKBRKR-S-12 for 12" x 2" brakes or part # K71-699-00 for 10" x 2-1/4" brakes. I have linked our selection for you to choose from. Simply measure the inside diameter and width of your drums and then filter through to the appropriate shoes.

Typically when it comes time to replace the brakes shoes we recommend just changing out the whole assembly. For trailer brakes the cost is actually just a little more and you don't have to worry about any other parts on your brakes needing replacing.

If you decide to go this route just let me know what those dimensions of your hub are and the weight capacity of your axle and I can make a recommendation for you.

expert reply by: Jon G