Inner Diameter of Boat Trailer Guide-On Roller
What is the actual diameter of the hole for the roller shaft. It’s made for use with 5/8” roller, but does the shaft fit tight or does the roller rotate on shaft? | Hi Harrison; it will be a snug fit since the actual inner diameter of the opening...
What Trailer Hitch Will Fit The 1985 Chevy Caprice And Can It Be Used To Tow?
searching for a hitch of 2in receiver, but the search showing the 1 1/4.. only,, the question is,, the 1 1/4 can will towing a car, ?? I have 1985 Caprice wagon, my plan is to towing a 1980 caprice, Im moving out of california.. | Hello,...
Trailer Hitch Options For A 1979 Chevy Caprice Wagon
Hi Will this model fit for 1979 Caprice wagon? | Hi Carston, The Curt Trailer Hitch Receiver # C12009 is listed as a fit for sedan models only. It looks like we unfortunately don't have a custom-fit option for a wagon model so you'd have to...
Finding Installer for Curt Hitch on 2009 Kia Rondo
A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...
Catalytic Converter For A 1996 Chevy Caprice Classic SS with the 5.7 Liter 350 V8
What type of Catalytic Converters fit my 1996 Chevy Caprice Classic SS/ 350 engine? | Hi Carmelia, sweet car! I always wanted one of the Roadmaster wagons. Things are cool. : ) The MagnaFlow Heavy Metal Loaded, Stainless Steel Catalytic Converter...
Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper
I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...
Is There a Class III Hitch for a 1994 Chevy Caprice
I am interested in buying a class III hitch for the above mentioned vehicle. My Caprice has the LS-1 engine designation 5.7L. According to the owners manual GM says it is capable of towing 5,000 lbs. with a weight distribution hitch. That is...
Is There a Trailer Hitch for a 1992 Cadillac Brougham
Hi i am looking for a class III hitch for a 1992 Cadilliac Brougham 5.7l Thanks | I may have an option for you but there aren't any custom fit trailer hitches for a 1992 Cadillac Brougham. Therefore, in order to attach a trailer hitch you'll...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Trailer Hitch Receiver to Fit 1994 Chevrolet Caprice Police Model
Will this hitch fit a 94 Chevrolet caprice police model | Curt offers Trailer Hitch, # C12009, which was designed for the Caprice Sedan and will work with the police model. This is a Class II hitch with a 1-1/4 inch receiver opening. If you...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Trailer Hitch Recommendation for a 2007 Kia Rondo
I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...
Wiring Harness With Easy Install For 2009 Kia Rondo
I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....
What Hitch do You Recommend for My 1987 Chevy Caprice Sedan?
looking for bolt in class-3 hitch | While we do have a great hitch option for your 1987 Chevy Caprice, we do not have any Class III hitches that fit. With that being said, your best and only option is to use the Curt Hitch - Class II - 1-1/4"...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Recommended Trailer Hitch Receiver for 2011 Kia Rondo
I am looking for a trailer hitch for my KIA Rondo 2011. Do you guys have anything for this models Thanks | For a trailer hitch that fits your 2011 Kia Rondo we have the Draw-Tite Trailer Hitch Receiver # 36525. This is a custom fit Class I...
Hitch and Bike Rack Recommendation for a 2009 Volkswagen Rabbit
Hello Looking for bike rack. Drive 2009 VW rabbit. Want simple rack, easy use, no scratch car, two adult bikes 1 womens. Thinking of getting hitch. Sort of new to biking. Dont want to spend a ton of money, but also dont want to worry about...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Filter Your Search
Contact and Help