Tow Bar for 1981 Volkswagen Rabbit Pickup
What tow bar will hook up to a Volkswagen rabbit truck bumper, I need one that is 31 inches | Hi Andrew; are you saying you need the arms to be 31" apart? The Curt Adjustable Tow Bar # C19745 you were looking at has an adjustable arm width from...
Crossbar Kit Recommendation to Fit with Retrax XR Tonneau Cover on a 2022 Ford Raptor
Hi I have a truck 2022 Ford Raptor with retrax XR tonneau cover with rails compatible with T-slot accessories. Can you please recommend cross bars that would work with the rails on the retrax xr tonneau cover? Thank you | Hey Bora, thanks...
How to Test a 4-Way Trailer Wiring Harness Plug
I installed a 4 way connector to a 4 way-7way adaptor on my 2000 Mercury Mountianeer. When testing the connector, the test light flashed for the left and right turn signals, but when I ed the tester probe into the 3rd female plug.and applied...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
Wiring the Hopkins Endurance Multi-Tow Trailer Connector # HM48470 on a 2001 Mercury Mountaineer
where do I connect the black wire from my vehicle ? | If the black wire on your 2001 Mercury Mountaineer is the 12V power wire from the vehicles battery you will want to connect that wire to the terminal at the eleven oclock position on the...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
2002 Mercury Mountaineer Brake Controller Port Location and Install Harness
I have a 2002 Mercury mountaineer with the factory tow package. I bought a trailer brake but I cannot find the pigtail that is supposedly under the dash somewhere. Can you help me as to where the pigtail would be located in my vehicle? | The...
Where Does a Brake Controller Plug Into on a 2005 Mercury Mountaineer
Where is the plug for brake controller located on a 2005 Mercury Mountaineer, under dash | On your 2005 Mercury Mountaineer, if it came with a factory installed 7-Way trailer connector then the brake controller port will be located behind the...
Winch Wiring Kit Recommendation for Badlands Winch at Rear of 2006 Mercury Mountaineer
I have a 9500 lb badlands winch and a receiver mount. I want to power it from the rear of my mercury mountaineer. What do I need? | The wiring kit you are going to need to go with is one that has a thick enough gauge to provide the amperage...
Towing Capacity of 2004 Mercury Mountaineer with a Weight Distribution System
I have a 2004 Mercury Mountaineer AWD 4.0L V6 with a factory installed 1.25inch hitch receiver. I am wondering if I can tow a 4500lb camper with a weight distribution hitch OR do I need to add the 2 inch hitch receiver to the Mountaineer? |...
Trailer Hitch for a 2002 Mercury Mountaineer with Factory 1-1/4 Inch Hitch
I have a 2003 Mercury Mountaineer that I bought used from the original owner. It has a OEM hitch with a 1 1/4 receiver. I have looked at your model # 75132, however I would like to remove the OEM and replace it with another so that I dont have...
Replacement Strap with Nut and Bolt for Dutton Lainson Winch
What bolt size would be the right one to install the strap to the winch it is a dutton lainson 2500lb winch. Thank you | Instead of the part # IMF14211 I have a better solution for you. Check out the part # DL24250. This is a 25 foot long strap...
Towing Capacity for Trailer Hitch and for 2007 Mercury Mountaineer
Tow capacity with a weight distribution hitch | I did some checking and it looks like your 2007 Mercury Mountaineer has a towing capacity of 3,500 lbs. You would need to check your owners manual or with Mercury to verify this based on how the...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Parts Needed To Install Yakima Space Case On 2004 Mercury Mountaineer What
Hello- I have a 2004 Mercury Mountainer-V8. What do I need to mount a Yakima Space Case on top of vehicle? | All you need to install the discontinued Yakima Space Case on your 2004 Mercury Mountaineer is crossbars with 30" to 36" spacing between...
How to Install Brake Controller in 2006 Mercury Mountaineer with Factory 4-Way
Where are the wires located to put in brake controller? Cant find anything online!?!?!?Would you possibly know the colors of them? Currently have a 4 pin flat connector for trailer lights. Thanks | You would need to convert the 4-way to a 7-way...
How to Install a Brake Controller on a 2008 Mercury Mountaineer
I have a 2008 Mercury Mountaineer. It is factory wired with a 4 pole flat connecter at the hitch. I want to install part #37185 so I can utilize the brakes on my camper. I have located the connector for the brake controller beneath the dash...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch
Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...
Recommended Ball Mount for a Mercury Mountaineer With 1-1/4 Inch Factory Hitch
Hello, I have a class 2 hitch that is 1 1/4, I need a 10 drop but having a difficult time in finding one. The Brophy drawbar is the closes I could find but it only has a 6 drop. Do you do any custom orders? Thanks, | I do have an option...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Filter Your Search
Contact and Help