Result:

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

02 v10 excursion stock factory ones are 3 in. long are these longer if not I do not seeing them making a diff. I think air bags would be better? pull enclosed trailer | The Timbren Rear Suspension Enhancement # TFREXC4 for your 2002 Ford Excursion...

Are timbren jounce springs a good option for suspension enhancement for my 2020 Ford Ranger? Is this something you would recommend for me to use both when I tow and when just driving every day? | The Timbren Rear Suspension Enhancement System...

Hi. Ive got a lifted with California rake sag 2010 Ford Ranger XLT Super Cab. Im looking at the Sumo bump stoppers for towing but dont know which one. I recently rented a Braxton Creek Bushwhacker 10SS tear camper for a trip. After hitching...

Will the suspension kit work on my 2023 For Ranger with the Tremor Package? | I checked with Timbren, the Timbren Rear Suspension Enhancement System part # TFRRGR is a confirmed fit for a 2023 Ford Ranger with Tremor Package. These feature a...

Will this product fit the Tremor Ranger? | According to my research the SumoSprings Solo Custom Helper Springs # SS76MR will fit with the Tremor package on your 2021 Ford Ranger, but the Tremor model sits about 1" taller than the standard Ford...

I have a 2000 Ford Excursion 4WD V10 and will be towing a 24foot Fishing Boat on a tandem trailer. Which item would be better at keeping my Excursions rear end level, the Timbren Rear Enhancement System TFREXC4 or the SumoSprings Solo Custom...

I currently have a set of Lippert 3500 lb axles V000113211 - LCI35-SB-86.5-68.5-NOSP-OS-L-545-7209-18PT and want to upgrade to 4400lb. Is there a equal in Dexter to look at? | When you are looking for a replacement axle there are a few measurements...

I have a 2005 Ford Excursion with the 6.0, everything on the vehicle is stock. I am pulling a 9,000lb 37’ travel trailer with the husky round bar Weight Distribution Hitch with Bolt-Together Ball Mount/Shank Assembly and Sway Control only 1...

How to improve payload while hauling a side in camper 2020 ranger hauling 1200lbs truck camper to improve payload..1785? | To reduce the suspension sag of your 2020 Ford Ranger when you are carrying your slide in camper a really great option...

TFF350SD2. Can I assume the ...SD2 is for 2w drive and the SD4 is for 4 wheel drive vehicles. | Yes, you are on the money with the fits. The Timbren Front Suspension Enhancement System # TFF350SD2 is a fit for the 2-wheel drive model of the...

Hi, Im looking to up-size my 4.80-12 tires/wheels on my 2000 lb utility trailer to 175/80d13 in an effort to help smooth the ride out. The leaf-spring suspension is appropriate for the trailer size, but the 80-90 psi with the current tires...

Can you provide dimensions for this product and more information on how it is mounted and where? | I will be happy to provide some dimensions and installation instructions for you for the Timbren rear suspension enhancement system, # TFRR050A,...

I am looking at a new 7 x 12 which I haul mostly a golf cart. which set up would you recommend? 3500 single axel upgrade to 5200 axel or go tandem?? | If you are looking to primarily haul a golf cart, going with a single 3,500 pound axle should...

Do you have the height measured from the spring top to the bottom of the frame for the Timbren TFF350SD4 kit for a 2001 Ford Excursion? Currently I have only 4.5 inches as the springs have sagged. Thanks | The Timbren Suspension Enhancement,...

Will this work with my 1994 ford ranger, or should i install front air bags? | Yes, the Custom Mounting Brackets for Detail K2 Snowplows item # K281110 are confirmed to fit your 1994 Ford Ranger. These will allow you to mount the Detail K2 Storm...

My excursion has f350 leafs on it which gave me 2.75inch of lift. Will the excursion kit still work or will the bushings be too short still causing it to sag before they make contact. | Because the stock ride height has changed, the # TFREXC4...

I have a 2000 Excursion and would like to get #TFREXC4 for the rear. My concern is that the vehicle has been lifted by a previous owner 3-4. I Measured the distance from the bump stop mounting point to the bar that they end up contacting and...

One side only or one pair? Some of the pictures show a pair and some of the pictures just show one side? o i | When it comes to installing The Timbren Rear Suspension Enhancement System # TFRRGR on your 2020 Ford Ranger they come in a pair....

Want to build heaviest tandem possible w/surge and axle-less susp. complete parts list would be most helpful. | The highest capacity Timbren Axle Less system is the 7k part # TASR7KS01 which can be used on a tandem axle trailer. For brake...

I just bought a 2001 excursion 7.3L 4x4. Has noticeable sway in turns and lots of play in shocks, so I replaced shocks today. Then noticed that the axle bumps stops in the front were gone completely and it still rolls a little in turns. Does...

Will these timbrens fit both the 2wd and 4wd 2022 ford ranger | Yes they do; the same Timbren helper springs will indeed fit both the 2WD and 4WD models of 2022 Ford Ranger, so no matter which you have the same part is a fit: - Timbren Rear...

What is the difference between the 3000 lb and 1000 lb system? Is the 3000 lbs the weight the system handles before it starts to rely on the stock suspension? I have a 3800 lb camper I tow and Im looking to eliminate the sag in the rear end...

I have a 2009 Ford Ranger Sport 6 cylinder four door pickup. I tow a small 16ft travel trailer. I traveled the US this summer with little problems. I was told at one park there is a suspension kit that I could get to be able to tow more trailer....