Result:

I am looking to upgrade the rear lights of my Car Mate 5x8foot utility trailer. I currently have Peterson PM444L lights. I am hoping to use the TLL16RK set however I am not sure if they will fit. The Petersons have the standard 2 inch center...

Where is this manufactured? | Hi Peter; Optronics does have some manufacturing facilities in the US but as far as I know the components included in the Optronics Trailer Light Kit # TL16RK come from their facility in Taiwan. |

I have the trailer lights wired through a conjunction box to a WesBarg 7-Way, RV-Style Connector w/ 6foot Long Coiled Cable - Trailer End - WG54006-043. the turn and brake lights work. the right side running lights work but not the left. | On...

Will this fit a SAE AP2 01 replacement amber side maker lens for a 2007 Rockwood Freedom 1640 LTD tent trailer? | If your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions...

I have purchased a 2006 Ford Ranger Pickup which I want to flat tow behind my motorhome. Are there special brackets to mount on the pickup for the tow bar or are they universal mounts. I need to order a tow bar and brackets but I am not sure...

Id like to upgrade my non- reflector trailer lights with your reflectors only. Are there any requirements as to how close these should be placed to the side marker lights? Thank you. | Trailer lighting requirements will vary depending on the...

What parts do I need? | If you haven't already the first thing you want to do is make sure your 2000 Ford Ranger can even be flat towed with all 4 wheels down behind a motorhome. From my research the 4-wheel drive model can as long as it's...

base plates for a 2002 ford ranger super cab standard 4 wheel drive - can I use a front mount hitch to attach tow bar? | A front-mount hitch such as # C31063 cannot be used to flat tow a vehicle such as your 2002 Ford Ranger because you would...

Looking for a complete LED submersible wiring kit for my 1991 ranger bass boat trailer. the kit would include 2 amber and one red LED on each side and sort of oval red brake/turn/tail lights and 2 small red rear lights as seen in the attached...

How can I attached Obtronics led license light to a pre-installed Curt aux led indicator lights, #5302? I have a hitch mounted cargo carry or is there a product that incorporates indicator lights and license plate light? | The Optronics LED...

Can you get me a set of Optronics STL87 Smoke Series lights? The manufacture part number is - Polypack part no. STL87DSRSHBP | Hey Glen. We've got a couple of options for Optronics Smoke Series lights but we don't have the STL87DSRSHB which...

I have a 2011 Ford Ranger with a 4 prong wiring harness. My boat has a 4 prong on it but 5 wires. All my turn signals work with running lights on and off. The brakes work with running lights off but not when the running lights are on | First,...

Hello, I have a camper and the receiver for the bunk light has a 5.5mm female connector but my bunk light/fan is a 1/4 in stereo jack. Is there an adapter or would I replace the existing Jacks? Thank you | We don't have an adapter, but...

The signal wire from the right turn signal is disconnect somewhere in the vechicle, so where does the green wire start from in the 2000 ford ranger? I put all new wiring harness on boat trailer and it still does not work. | If your 2000 Ford...

I have a 2002 Ford Ranger just put new wire harness and lights on my trailer but now neither lights work when I turn on the turn signal in the truck.I did check all the fuses in the cab of the truck,but the fuses under the hood you cant tell...

Do you have a kit that will work with a 1989 ford ranger? I want to set it up to be towed behind RV. | We can help you with the items you'll need to flat tow your 1989 Ford Ranger behind your motorhome. These include components like the tow...

Can a license plate be mounted on this and look like it belongs there? | It wouldn't really be possible to mount a license plate to the Carr Mega Step Fold-Up Step - 2" Hitch - 14" Long part # CARR190011B because you would need to install it...

I like the Roadmaster Tracker Tow Bar - 2inch Ball - 5,000 lbs Item # RM-020. I have a ranger and want to leave the bar on and lock it in the up position when I detach. What other products do I need to permanently attach it to the truck | ***emailed...

2004 ford ranger 4 pole flat connectors, the connectors have W, Y, G, B wires trailer wiring= W Y G GB YB | It sounds like you have a wishbone harness on your...

am looking for roadmaster tow plates for 1996 ford ranger 2 wheel drive splash no fog lights | Roadmaster offers the XL Base Plate Kit, # 435-3, for your 1996 Ford Ranger. In addition to the base plates, you will also need a tow bar, safety...

Could you please tell me the size of this lens? | The lens part # A60RB is 5-3/4 inches long by 6-5/8 inches wide. It is a replacement for the part # ST60RB. |

Hello..Id like to install a toggle switch to my tail lights..I have a 1988 ford ranger..can you please send me a little help | If you are looking for a toggle switch for custom tail lights or some modifications to your 1988 Ford Ranger, then...

In one of your Q and As you recommended to use the STL56RB for both Passenger and Driver side but if I do that the reflector will be upside down and the mounting slots would be directed the wrong way. Is there a left and right version to the...

I need to replace a Bargman part inch 30-93-xxx lens cover in the interior of my 2000 venture tent trailer. Will this part work? | The Replacement Lens for Arcon Euro Style LED Dome Light part # AR18017 is the replacement lens for Arcon Euro-style...