Result:

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

Are timbren jounce springs a good option for suspension enhancement for my 2020 Ford Ranger? Is this something you would recommend for me to use both when I tow and when just driving every day? | The Timbren Rear Suspension Enhancement System...

Will the suspension kit work on my 2023 For Ranger with the Tremor Package? | I checked with Timbren, the Timbren Rear Suspension Enhancement System part # TFRRGR is a confirmed fit for a 2023 Ford Ranger with Tremor Package. These feature a...

Hi. Ive got a lifted with California rake sag 2010 Ford Ranger XLT Super Cab. Im looking at the Sumo bump stoppers for towing but dont know which one. I recently rented a Braxton Creek Bushwhacker 10SS tear camper for a trip. After hitching...

Will this product fit the Tremor Ranger? | According to my research the SumoSprings Solo Custom Helper Springs # SS76MR will fit with the Tremor package on your 2021 Ford Ranger, but the Tremor model sits about 1" taller than the standard Ford...

How to improve payload while hauling a side in camper 2020 ranger hauling 1200lbs truck camper to improve payload..1785? | To reduce the suspension sag of your 2020 Ford Ranger when you are carrying your slide in camper a really great option...

Can you provide dimensions for this product and more information on how it is mounted and where? | I will be happy to provide some dimensions and installation instructions for you for the Timbren rear suspension enhancement system, # TFRR050A,...

Hi, Im looking to up-size my 4.80-12 tires/wheels on my 2000 lb utility trailer to 175/80d13 in an effort to help smooth the ride out. The leaf-spring suspension is appropriate for the trailer size, but the 80-90 psi with the current tires...

I am looking at a new 7 x 12 which I haul mostly a golf cart. which set up would you recommend? 3500 single axel upgrade to 5200 axel or go tandem?? | If you are looking to primarily haul a golf cart, going with a single 3,500 pound axle should...

Will this work with my 1994 ford ranger, or should i install front air bags? | Yes, the Custom Mounting Brackets for Detail K2 Snowplows item # K281110 are confirmed to fit your 1994 Ford Ranger. These will allow you to mount the Detail K2 Storm...

One side only or one pair? Some of the pictures show a pair and some of the pictures just show one side? o i | When it comes to installing The Timbren Rear Suspension Enhancement System # TFRRGR on your 2020 Ford Ranger they come in a pair....

Will these timbrens fit both the 2wd and 4wd 2022 ford ranger | Yes they do; the same Timbren helper springs will indeed fit both the 2WD and 4WD models of 2022 Ford Ranger, so no matter which you have the same part is a fit: - Timbren Rear...

What is the difference between the 3000 lb and 1000 lb system? Is the 3000 lbs the weight the system handles before it starts to rely on the stock suspension? I have a 3800 lb camper I tow and Im looking to eliminate the sag in the rear end...

I have a 2009 Ford Ranger Sport 6 cylinder four door pickup. I tow a small 16ft travel trailer. I traveled the US this summer with little problems. I was told at one park there is a suspension kit that I could get to be able to tow more trailer....

I had TFRR050A installed on my 2009 Ford ranger 2wd stock and there is over 2” before it touches the axel. What spacers would I need to close the gap to 1/2” | To get a total of 1-1/2 inch of spacer for your Timbren kit part # TFRR050A you'd...

Hello - I have the Dexstar Conventional Steel Wheel - 16inch x 6inch Rim - 6 on 5-1/2 - Black Powder Coat, which has a 4.27inch pilot diameter. Is there a Hub/Brake assembly that would match up well with this wheel, being installed on a...

2011 Ford Ranger XLT 2WD, 4.0 V6, w/ ARE fiberglass cap, 55K miles. I already installed the RAS system last week. However, in my long wait for that suspension upgrade I also ordered the Timbren part # TFRR050A. So my question is this. Is using...

Hello, I am fabrication a trailer that is 60 inches wide. Its a 5x10. I am planning on mounting 15 inch tires. The trailer frame is for a tear camper and will weight 1300lbs at most. can you recommend an axle that will fit the size of my...

So, it seems to me that you would connect your trailer and then adjust these to get the truck level correct? Then when you disconnected the trailer would you not have to bleed them back down some? Please corect me if Im wrong but It almost seems...

Hello, Im building a tear trailer camper and need to have an axel chosen before having a trailer chassis fabricated. I would like to build up to a 26-27 tire diameter and anticipate having approximately 2,200 lbs GVW/GTW. Can you recommend...

will this work on a Jayco swift 145R single axle camping trailer and what are other options to upgrade suspension | The Timbren Trailer Suspension Enhancement System, part # TTRA1702 is designed for light duty trailers. This system has a weight...

I have the 1995 Ranger either PU or Splash, not sure. I have a contractors metal canopy on back which weights about 275 to 300 lbs. I put rear half of bolt-on helper springs to raise rear-end about 1-1/2 inches. I pull a trailer with a tougne...

Trailer is 1/4 ton. With max payload, total weight will be no more than 1200lb Have 2020 Ford ranger so want to use same bolt pattern 6x139.7mm 6x5.5in Looking for axle-less with electric brakes and controller, to fit 17 or 18 inch wheels...

I have a 1988 Ford Ranger. It has a 3 Inch lift in it. I am wondering if this can be used on a Lifter truck and if it would be of any use. Thanks | Timbren Rear Suspension Enhancement # TFRR0504A is designed for a stock 1988 Ford Ranger 4x4...