Can Timbren Helper Springs be Used on a 1988 Ford Ranger 4x4 with 3 Inch Lift
Updated 01/16/2017 | Published 01/14/2017
Products Featured in This Question
Question:
I have a 1988 Ford Ranger. It has a 3 Inch lift in it. I am wondering if this can be used on a Lifter truck and if it would be of any use. Thanks
asked by: Ryan D
Expert Reply:
Timbren Rear Suspension Enhancement # TFRR0504A is designed for a stock 1988 Ford Ranger 4x4 but they do make spacers to use the system with a lifted truck. The spacer # A25723-90AH00 is 1 inch tall so if the distance between the top of the axle and bottom of the frame is 3 inches more on your truck than stock you would need a total of 6 spacers. Longer bolts will also be needed but will have to be obtained locally.
Product Page this Question was Asked From
Timbren Rear Suspension Enhancement System
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Standard Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Holiday 2025 | Best Gifts for Towers
- Q&A: Can Self-Contained Hydraulic Jack e33VV be Welded on
- Q&A: Can The Self-Contained Hydraulic Jack # e33VV Be Installed On A Sundowner Horse Trailer
- Q&A: What Are Dimensions of Housing on Self-Contained Hydraulic Jack e33VV
- Q&A: How Is The Self-Contained Hydraulic Jack e33VV Powered?