Rabbit x > RZ x > RVR x > Evoque x >
Trailer Hitch that Fits 2026 Lexus RZ350e Electric
I’m looking for a 2 inch receiver that will fit my Lexus RZ350e 2026. I will be using it for a bike rack not for towing. I found the one that fits the 2026 Lexus RZ350 but it does not specify if it also works with the electric model. Can you...
Does the Curt C58VV Hitch Fit a 2026 Lexus RZ450e AWD and Affect the Hands Free Liftgate?
2026 Lexus RZ450e AWD with 2nd motor driving rear wheels. Does this Curt receiver fit? And does it interfere with the kick sensor to open the rear hatch? | Hi Stephen, Yes, the Curt Rack Receiver, Part # C58VV, is confirmed by Curt to fit...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Recommended Trailer Hitch for 2017 Land Rover Evoque HSE Dynamic
I will install whatever hitch I choose on my 2017 Range Rover Evoque HSE Dynamic. The Dynamic trim level includes what RR calls Dynamic Body upgrades, and while Im not sure, I think my rear fascia extends further under the body than the model...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
What Hitch Will Fit On My 2024 Land Rover Evoque Dynamic SE
Good afternoon, I would like to know if part DT45JR trailer hitch fits a 2024 Evoque Dynamic SE | Thanks for your question, Sal! I double checked with Draw-tite for you and they don't exclude any trim package options for the Evoque so hitch...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit
Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Location of Install Connector for Trailer Wiring on a 2012 Land Rover Evoque
Hi, I am trying to figure where the Land Rover Evoques wiring harness is. It seems to be located in the opening under the passengers side, to the right of the muffler. This opening is located under the passenger side at the rear of the car under...
Does The Curt Trailer Hitch For A 2018 Land Rover Evoque Require Trimming To Install
Hi. Will the 2018 Land Rover Evoque SE Premium require any trimming for C13128 installation? Thanks. | Yes, the Curt Trailer Hitch Receiver # C13128 would require trimming of both the heat shield and rear fascia in order to install. |
Trailer Wiring Harness Fit for 2017 Land Rover Evoque
Hi there, I see that Item # 118624 fits 2015 range rover evoque but doesnt say it is not confirmed to fit 2017. Does this mean that it absolutely wont fit or it just isnt confirmed? I am confused because the end plug looks the exact same. |...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Hitch, Wiring and Brake Controller for 2016 Land Rover Evoque
I have a 2016 range rover evoque I need a hitch that would work with a 19 foot long bow ride boat | We offer three options in a 2-inch Class III hitch for your 2016 Land-Rover Evoque that can be seen on the linked page. The highest capacity...
Does Kuat NV 2.0 Bike Rack Work With 2 Inch Draw-Tite Trailer Hitch Receiver
Hi, I recently bought a Draw Tite 2inch hitch Item # 75227 and had it installed on my 2013 Range Rover Evoque. Im looking for a bike rack and am considering the Kuat NV Item # NV22G. Is this rack compatible with the hitch I purchased?? Would...
Does Curt Echo Brake Controller Work With 2021 Land Rover Range Rover Evoque
We have a 2021 range rover evoque and need to have a brake controller for the trailer. The 7 pin connector does not have the brake wire conneted or available. Will the Curt echo work without this wire literature states it will and if so assume...
How to Prevent Exhaust Components from Contacting the Trailer Hitch
I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...
Tongue Weight of Travel Trailer Towed By 2020 Land Rover Evoque
Hello, could you please help me with the following issue: I have a 2020 Range Rover Evoque, no hitch installed yet. And I recently purchased a 2019 Airstream Sport 16inch with 3500 GVWR and 378 hitch weight. I am looking for a towbar for...
Recommended Roof Racks for Mitsubishi RVR 2018
Hi! Not sure if Mitsubishi RVR roof racks have changed over the years but interested to hear recommendations. | We have roof racks that are a confirmed fit for your 2018 Mitsubishi RVR. If you have a naked roof you'd want the Rhino Rack kit...
Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR
I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...
Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit
I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...
Filter Your Search
Contact and Help