bing tracking image

Rabbit  x   >   R1S  x   >   RVR  x   >   Accolade Motorhome  x   >  

Result:

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

How Does Brake Controller Install on Freightliner S2RV Chassis

I am looking for a trailer brake controler for my motorhome Freightliner S2RV chassie that is just plug and play oe I can just plug into a factory harness without splicing wires can you helpp? | To install the Tekonsha Prodigy P3 Trailer Brake...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20

Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |

How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S

what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...

16,000 lbs Hitch Receiver for a 2021 Entegra Coach Accolade Motorhome

I have a rv 2021 jayco seneca its like the entegra accolade and renegade velancia. I want to upgrade my hitch bar to a 16000 lb. Which hitch would I purchase that bolts up. The one I have on there now is 12000 lbs | I have a couple of options...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Which Side of the Power Cord Does the SmartPlug Connector Plug Assembly for RV Power Cords Install

What side power cord does this fit | The SmartPlug Connector Plug Assembly for RV Power Cords part # SM47FR replaces the connector that installs on the trailer side, into the power inlet. It will also require the SmartPlug RV Power Inlet part...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Determining The Correct SnapPads For A 2023 Entegra Accolade Super C Motorhome

Looking for jack pads for a 2023 Entegra Accolade. The ones that appeared to be round but mine are square. Any thoughts? | We have a few different sizes and shapes of SnapPads available for your 2023 Entegra Accolade, you'll just need to measure...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Reflex RBK26 Bracket Kit for a Roadmaster Reflex Steering Stabilizer

I am looking for a Reflex rbk26. Thanks | Yes, we do have the Reflex RBK26. It is the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer item # RM99VR. These brackets attach to your motorhome's frame so that you can mount your...

Can Axle Perches Be Welded to the Frame?

The manufacturer of my trailer Carson Trailers just welded the axle perch straight to the trailer frame. Can these be welded to the frame or should I buy the brackets shown in other pics not sure the name of them and have them in stalled prior...

Filter Your Search