bing tracking image

RZR  x   >   R1S  x   >   Rabbit  x   >   FRED Chassis  x   >  

Recommended Tire Chains for a 2023 Rivian RS1 275/50 R22

Hello, I’m looking for low profile 16mm or smaller snow chains/cables for my 2023 Rivian RS1 275/50 R22. Would these work? Thanks! | Hey Julie, thanks for the information and the picture! I checked with Rivian and we've only got one set of tire...

Where Do You Measure From On The Trailers Coupler to Install The Pole-Tongue Adapter # EQ95-01-5950?

For the tongue pole adaptor, you mention in the video that it need to be install between 27 to 32 inches from the reveiver in the tongue. Do we mesure from the tip of the receiver or the middle, because if I mesure from the tip of the receiver...

Would Thule Hullavator Work With Rivian R1S OEM Roof Rack?

Im trying to install the Thule Hullavator on a Rivian R1S. I already have the Rivian Cargo Crossbars so Id prefer to use these if possible. The Hullavator requires the crossbars to overhang and the Rivian Crossbars dont. Is there a way to stackinch...

Will etrailer Spare Carrier # e98ZR Work with Rivian R1S 20

Does this fit a rivian r1s 20 inch all terrain tire? 275 / 65 / R20 | Hey John, yes the etrailer spare tire mount part # e98ZR that you referenced will work with the wheel and tire Rivian R1S 20 inch all terrain tire that you referenced. |

How to Tell if Power Mountain Tallboy Off-Road Bottle Jack Will Work with a 2023 Rivian R1S

what jack can you recommend for changing tires on my Rivian R1S 2023 and Intech Sol Dusk Rover off road package travel trailer? Will the Tallboy pm34fr work with a Rivian puck? | Hey Darin, thanks for reaching out! The Power Mountain Tallboy...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Width of Channel on the Curt Channel Style Adjustable Ballmount C45900

Can you.let me know the width of the channel on the curt c45900 Regards | The interior channel width of the Curt adjustable ball mount part # C45900 that you referenced is 3 inches. |

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

SumoSprings Fit for Tiffin Allegro Open Road on 2008 Freightliner FRED Chassis

I have a Tiffin Allegro Open Road BA32 FRED. It has a Freightliner 2008 MC Front Engine Motor Chassis. Can U Verify that this RV can use the SSF-501-40 Sumo spring and the SSR-502-54 | I checked with SuperSprings (the manufacturer of SumoSprings)...

Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724

Hello, can you tell me the o/a dimensions of Lippert Components waste master 90 degree elbow fitting including integrated handle and shut-off lever? Im concerned about the thickness of the elbow fitting under my service panel in the compartment....

Availability Of SumoSprings Helper Springs For 2008 Tiffin Built On Freightliner FRED Chassis

do you have helper springs to fit this frame 26000 freightliner , we have a 08 tiffin with the front engine and it seems to sway a lot even with new factory shocks . what do you recommend . thanks | There are helper spring options for your 2008...

Can a Derale Transmission Cooler be Used with an Allison 2200MH Transmission on a Motorhome

I have a 2007 Fleetwood Allegro FRED motorhome with an Allison 2200MH transmission. It appears to have 12AN fittings which means the hose inner diameter is probably .69” or close to it. If I add a transmission cooler and the hose or cooler...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

2006 Freightliner FRED RV Chassis Replacement Trailer Hitch Options

I need a hitch for a 2006 Freightliner FRED RV chassis? The one on the chassis now is a Curt 81201 which is discontinued. | For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

Replacement Curt Trailer Hitch Hardware Kit for a 2009 Volkswagen Rabbit

Hi - I recently received a CURT C11074 Trailer hitch for the 2009 VW Rabbit from a friend who no longer has their MK5 rabbit. Is it possible to purchase *only* the replacement mounting hardware for this specific mount instead of the generic...

Wheel Net Recommendation for a Polaris RZR with 27x9R-14 Front Tires and 27x11R-14 Rear Tires

I have a 2012 RZR XP. It has 27-9R-14 in the front and 27-11R-14 in rear for tires. I have put the E-TRACK system on my trailer. I want to know if there is a tire strap that would work. | For your tires, I recommend going with the Erickson Wheel...

Hitch and Bike Rack Recommendation for a 2009 Volkswagen Rabbit

Hello Looking for bike rack. Drive 2009 VW rabbit. Want simple rack, easy use, no scratch car, two adult bikes 1 womens. Thinking of getting hitch. Sort of new to biking. Dont want to spend a ton of money, but also dont want to worry about...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Winch Mount Recommendation for 2013 Polaris RZR-4 XP 900

What winch mount will work for my 2013 rzr xp 4 900? | We have the Bulldog Winch Mount part # BDW15167 which is a confirmed fit for your 2013 Polaris RXR-4 XP 900. You could use it with the part # BDW15001. |

Filter Your Search