bing tracking image

RX350  x   >   RVR  x   >   Rabbit  x   >   Sable  x   >  

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Most Common Flat Towing Vehicles

Might be an odd question Do you have a list of vehicles that will work well for flat towing behind at RV? Thanks for your help. Jim | Hey Jim, We don't have a list made up but the most common vehicles I see people flat towing are: Jeep:...

Availability of Hitch Install Hardware for 2005 Mercury Sable

Im looking for a bolt kit to install my hitch a 2005 Mercury Sable | Hey Larry, do you know what hitch specifically you have? We have replacement hardware kits for the hitches we carry like the Curt part # C12232 that fits your 2005 Mercury...

Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?

Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...

Replacement Jack For 2001 Stratos Bass Boat Trailer

I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...

Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer

My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...

What is the Battery Life for Hopkins Wireless Magnetic Tow Lights

What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...

Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load

What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...

Should Rusted Trailer Hitch Receiver be Replaced

I installed one of these Curt Trailer hitches on my 1997 Sable Station wagon and it is now so rusty I am concerned about safety. Is there a way to test it to see if it is still safe to use? | The Curt trailer hitch receiver for your 1997 Mercury...

Items Needed to Tow a Trailer with a 2011 Lexus RX350 Without Tow Package

I bought a 2011 RX350 Canadian version that was not ordered with the tow package. What do I need to install to properly tow our 2500 lb boat? | To tow your boat trailer with your 2011 Lexus RX350, you will need a trailer hitch, wiring harness,...

Will The Curt Trailer Hitch Receiver C12232 Fit a 2001 Mercury Sable Station Wagon?

Will #C12232 fit a 2001 Sable Station Wagon? I don’t see anything about wagons. | Yes, the Curt Trailer Hitch Receiver # C12232 is compatible with your 2001 Mercury Sable station wagon as well as the sedans. This will only fit on models with...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Troubleshooting Tail Lights on 2008 Mercury Sable Not Working With Curt T-Connector Installed

Vehicle: 2008 Mercury Sable I installed the custom wiring harness on my Sable this evening and thought it was super easy. I verified that the harness with the yellow wire is on the driver side. And I pushed in all the connectors until they...

Safe Driving Speed When Using Tire Chains Like Konig Self-Tensioning Snow Tire Chains TH04115095

how fast can I drive with these on 04 Mercury Sable | All tire chains require reduced driving speeds. If road conditions are bad enough to justify the use of tire chains then they are also bad enough to merit a slower driving speed. Individual...

Replacement Tail Light Assembly for 1988 Coleman Chesapeake Pop-Up

I have a 1988 Coleman Chesapeake pop up camper. It has a 2 bulb/4 wire assembly that needs replaced. Will a 1 bulb/2 wire assembly work correctly for this? Thanks! | Actually, we offer a closer replacement that includes a reverse lamp, more...

The Correct 4-Pole Hardwire Wiring Kit and Installation Instructions for a 2004 Mercury Sable

Will this work on my vehicle -seems there are so many bulbs I was curious whether this is the one would work | The 4-Pole Hardwire Kit, # 20250 is similar to the product you need but it is not quite the right one. The wiring harness for your...

Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible

have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Will the C12232 Class III Trailer Hitch Fit with Factory Dual-exhaust on a 1998 Mercury Sable

Will this hitch be compatible with my 1998 Sable dual-exhaust model? None of the pictures or installation instructions mention this specific model. | I spoke with my contact at the manufacturer to make sure there were no issues with the factory...

Aero Bar Rhino Rack Roof Rack that Fits 2009 Volkswagen Rabbit 5 Door Hatch

Hello, I am looking at RR56RR for my 2009 Volkswagen Rabbit 3 door. Your site says it will fit but when I use the part number RV0230B into rhino racks site it states its only for the 5 door car. Which is correct? I really want these for my...

Troubleshooting Turn and Brake Lights not Working with Running Lights on, 2009 Volkswagen Rabbit

I have the same problem than the VW GTI guy. After I have wired the kit according to the 2-wire method into my 2009 Rabbit, turn and stop light are working as long as the running light is not on. I have tried also the different 3-wire methods...

How to Prevent Exhaust Components from Contacting the Trailer Hitch

I purchased the replacement CURT trailer hitch hardware from eTrailer for this hitch and installed the 11074 on my 2009 4DR Rabbit. However - after install, I now experience a lot more noise at low RPMs. Theres vibration being transmitted back...

Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR

I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...

Filter Your Search