bing tracking image

RVR  x   >   FRED Chassis  x   >   Rondo  x   >   XTS  x   >  

Result:

Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter

Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...

Could Thule Force XT Fit Factory Crossbars 2015 Cadillac XTS

Hi. I dont have factory crossbars. Can I use any crossbars? Thanks | Yes the Thule Force XT Rooftop Cargo Box # TH6358B would fit the factory crossbars you have on your 2015 Cadillac XTX 5 door. | Yes the Thule Force XT Rooftop Cargo Box # TH6358B...

Why Choose a Powered Taillight Converter Over a Non-Powered Model

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Finding Installer for Curt Hitch on 2009 Kia Rondo

A Curt Trailer Hitch Receiver for a Kia rondo 2009 what car brands aré compatible to install the tráiler Hitch | Hey Adrian, I attached a link to an installer locater that you can use to find someone to install the Curt hitch part # C11031 on...

Parts Needed to Add Brakes to 1992 Coleman Arcadia Pop-Up Camper

I want to add brakes to my 92 Coleman Arcadia pop-up. I am looking for the correct hub/drum and electric brake assemblies. The wheel bolts are 5 on 4 1/2 and the tires are Carlisle USA Trail 20.5x8-10. The current axle includes a square flange...

Width of Channel on the Curt Channel Style Adjustable Ballmount C45900

Can you.let me know the width of the channel on the curt c45900 Regards | The interior channel width of the Curt adjustable ball mount part # C45900 that you referenced is 3 inches. |

How Hard is it to Install a Trailer Hitch on a 2013 Cadillac XTS

Need to know how much trouble to install hitch .I see no information for this installation. | The installation difficulty for Draw-Tite trailer hitch # 36538 for a 2013 Cadillac XTS is listed as a 5 out of 10. The scale is based on estimated...

SumoSprings Fit for Tiffin Allegro Open Road on 2008 Freightliner FRED Chassis

I have a Tiffin Allegro Open Road BA32 FRED. It has a Freightliner 2008 MC Front Engine Motor Chassis. Can U Verify that this RV can use the SSF-501-40 Sumo spring and the SSR-502-54 | I checked with SuperSprings (the manufacturer of SumoSprings)...

Overall Dimensions of the 90 Degree Elbow Part of Lippert Waste Master RV Sewer Hose # LC359724

Hello, can you tell me the o/a dimensions of Lippert Components waste master 90 degree elbow fitting including integrated handle and shut-off lever? Im concerned about the thickness of the elbow fitting under my service panel in the compartment....

Can a Derale Transmission Cooler be Used with an Allison 2200MH Transmission on a Motorhome

I have a 2007 Fleetwood Allegro FRED motorhome with an Allison 2200MH transmission. It appears to have 12AN fittings which means the hose inner diameter is probably .69” or close to it. If I add a transmission cooler and the hose or cooler...

Availability Of SumoSprings Helper Springs For 2008 Tiffin Built On Freightliner FRED Chassis

do you have helper springs to fit this frame 26000 freightliner , we have a 08 tiffin with the front engine and it seems to sway a lot even with new factory shocks . what do you recommend . thanks | There are helper spring options for your 2008...

How To Install Vehicle Wiring Harness Of 2013 Cadillac XTS

I have been trying to install a trailer wiring kit on my 2013 Cadillac XTS using a Curt 59190 wiring kit with no success. I cant get the lights to function properly, Im assuming this isnt compatible with my car? If it isnt, would wiring kit...

Trailer Hitch Recommendation for a 2007 Kia Rondo

I am looking for a trailer hitch for a Kia Rondo that was manufactured in Dec, 2006. I dont see one in your listing earlier than 2007. Thank You | That is because you most likely have a model year 2007 Kia Rondo that happened to be built in...

How Do The Seat Cover Solutions Rear Seat Covers Install in a Sedan?

Concerned about the rear seat fittings I have a panel that comes down in the back do you cover the panel | Hi Stanley, Since you have a sedan, I'm assuming by back panel you mean that that seats don't have any open space behind them like how...

Will a Trailer Hitch Receiver on a 2013 Cadillac XTS Carry a 200 Pound Scooter

Have a 2o13 cadillac xts luxury am handicapped ,want to knoww if trailer hitch could accomodatre a drive on mobility scotter total weight of 200 lbs | Trailer hitch receivers to fit your 2013 Cadillac XTS, like the Draw-Tite # 36538, are Class...

How to Install Yakima KingJoe Pro 3 Bike Trunk Rack on 2014 Cadillac XTS

I bout the Yakima kingdom pro 3 and have a 2014 Cadillac XTS. I asked someone already and they confirmed they were proper fits but I cant find the measurements for the fit anywhere. Please help. Thanks. | The Yakima KingJoe Pro 3 Bike Trunk-Mount...

Trailer Hitch and 4-Way Wiring Recommendation for 2018 Mitsubishi Eclipse Cross

I need a hitch and 4 wire harness for a 2018 mitsubishi eclipse cross | For your 2018 Mitsubishi Eclipse Cross we have the Curt hitch # C13273 which is a confirmed fit and then for 4-way wiring you'd want the part # C56296 and you'd be set. |

Would Trailer Hitch from 2015 Cadillac XTS Fit 2017 XTS

I have a 2015 Cadillac SRX with a class III purchased from your site. Can I transfer this hitch to a new 2017 Cadillac XT 5? | Yes, if you had a hitch like the Draw Tite part # 36538 which is a fit for a 2015 and 2017 Cadillac XTS This hitch...

2006 Freightliner FRED RV Chassis Replacement Trailer Hitch Options

I need a hitch for a 2006 Freightliner FRED RV chassis? The one on the chassis now is a Curt 81201 which is discontinued. | For your application you'll need to use one of our universal RV trailer hitches like the Curt Hitch # C13704. This fits...

Troubleshooting Rhino-Rack Roof Rack Installation on 2018 Mitsubishi RVR Flush Rails

Ive tried to install the kit of the SX031 legs on my 2018 RVR, but if you look at the pics those legs are not straight on the flush rails so when I have the bars on them then they dont fit anymore... Am I doing something wrong or I got the wrong...

Wiring Harness With Easy Install For 2009 Kia Rondo

I am interested in the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2009 Kia Rondo. One of the issues I see in the reviews is that the green wire from the drivers side to the passenger side can be too short....

Draw-Tite Trailer Hitch for 2018 Cadillac XTS

Is there any photos of this hitch on a xts? | We have not had the opportunity to test fit the Draw-Tite Trailer Hitch # 36762 on a 2018 Cadillac XTS and while sometimes the installation manual shows this, since this hitch fits this car as well...

Trailer Hitch and Bike Rack for 4 Bikes for a 2018 Mitsubishi RVR

I have a 2018 RVR. Can you recommend a hitch for a bike rack, 4 bikes, and a bike rack? No towing. And I don't want to have to use any straps if possible. | I will be happy to help. For your 2018 Mitsubishi RVR I recommend etrailer Trailer Hitch...

Trailer Hitch and Wiring Recommendation for 2022 Mitsubishi RVR

Hi there I just bought a 2022 Mitsubishi RVR and wanted some clarification on what hitch and wiring I need? Could you send links? Also there’s no videos for install? Thanks | For your 2022 Mitsubishi RVR the e63AR Hitch part # e63AR is the...

Filter Your Search