!Wildcat Maxx Travel Trailer  x   >   International Trucks  x   >  

We purchased the Prodigy 2 Brake Controller from you for our International TerraStar 2012 truck. The fifth wheel hitch came from you, too. The trailer brakes worked BEFORE we installed the brake controller. Do we really need the Prodigy 2 Brake...

Looking for a trailer hitch for a 1995 International 4700 Low Pro. It has a 10 foot flat bed on it. The rear leaf spring hanger is bolted onto the out side of the frame. No room to weld a hitch on the outside of the frame. I need one that...

I recently purchased a 2014 terrastar international. I’m going to be using this truck to haul my 12k spray foam trailer. Unfortunately the truck was not equipped with with electric bakes . What would you recommend for high quality trailer brakes?...

What hitches do you have for a 2000 international 4900 truck. Class 4 or class 5 | There are a few options for your 2000 International 4900 Truck, but there is not a custom fit receiver available. The Super Titan 4000 Weld-On Trailer Hitch...

We have an aftermarket bumper on our truck and Im trying to see if this hitch will work with it. What is the clearance from the top of the receiver tube to where it mounts on the frame? Also, what is the horizontal clearance of the mounting...

Trailer hitch. 2008 International 4400 Ambulance | While there isn't a custom fit trailer hitch for your 2008 International 4400 ambulance, there may be an option for you with a weld-on hitch. It just depends on the width of your frame, and...

Id like to add an electric brake controller to a 2018 International LT 625 with air brakes. Any advice? | You are going to want to use the Hayes Air Actuated Trailer Brake Controller # HA100400C on your 2018 International LT625. With this brake...

I am looking for a engine oil cooler kit for my 1979 international scout 2 with a V8 345 . Thank you | For your 1979 International Scout II I recommend # D15405 for an oil cooler. This cooler will fit engine filter thread sizes 3/4"-16, 13/16"-16,...

Will this fit on a 2007 international durastar 4300 | The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on...

when I enter vehicle infor #C31083 comes up for front hitch set up for 1976 IH Scout. Does it indeed fit our vehicle and what class is this hitch? | The only hitch I have for you is going to be a rear class III hitch # 13580. The # C31083 front...

The only wires I have been able to find on my truck also control signal lights, since brake and signal lights run off the same wire. My tow truck is a 2007 IH 4300. | We may have a solution for you. To wire a brake controller on your 2007 International...

I’m looking for a hitch plate for my 1996 international lpx 4700. Will the buyers products 1809065 fit? | According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International...

I have a 2000 international 4900 tractor trailer I’m going to install a pintle hook to carry up to 50,000 pounds. What is the weight rating on this item? | While the Buyers Products Fabricators Hitch Plate # 3371809027A does not carry a weight...

I previously asked a question about hitch plate 1809065, I do realize it’s intended for the Chevrolet/ gmc. It would be nice to have all the dimensions for the plate. I do appreciate the specifications given but what about the width and height...

I’m considering purchasing the TSC to help reduce periodic sway with my 97 Airstream “Squarestream” fifth wheel. I’ve tried all I can do to eliminate periodic sway, including getting a much larger truck AND tweaking the hitch location along...

I have a 1982 International Harvester dump truck with a large bench seat. The bench is 65inch wide and 18inch deep. The back is also 65inch wide and 20inch tall. Can you please tell me what will fit, and/or provide dimensions for these covers? Thank...

I have a 1994 International 4900 truck and I need a 7 way round harness and brake controller for towing my equipment trailer Can you please point out which universal wiring harness kit and brake controller I will need? Thanks | We can get...

Hi, Im looking to purchase a Curt Hitch 14082. what would the appropriate 4 pin flat connecter harness and brackets be? I have a vintage 1965 Travelall that this is going on. There are numerous choices for the wire harness. I like the the idea...

Will this hitch fit a 2018 kenworth w900 road tractor | The Reese Super Titan 4000 Trailer Hitch # 38208 referenced in your question is a universal-type hitch that is designed for "C" channel style frames that are approximately 34-34-1/2 inches...

I have a 2023 Nexus Wraith super C RV . It is built on an International MV607 chassis and has liquid springs suspension in the rear. I am curious if you sell a front stabilizer for this truck. Also interested in upgraded front shocks | You're...

I see that you advertise 2016 International Trucks Torrastar - Road master Rear Anti-Sway Bar for Trucks, Do you also carry the 1. Front Anti-Sway Bar, and 2. Steering Stabilizer | In addition to the rear anti-sway bar # RM-1179-112 for...

What is the width of the frame bolt pattern? | The bolt holes on the Curt Trailer Hitch Receiver # C15302 sit across from each other 39" on center and are separated front to back by 7-1/2" on center. This is a custom fit for the following vehicles: 2008...

I have a hydrastar EOH trailer actuator. I purchased HBA-CAM for compatibility with my 2013 Silverado. It worked great. I also have a 2005 International 8600 with a Hayes 100400C air actuated controller that I’d like to pull the same trailer...

Hello I am looking for a trailer hitch that has fairly specific requirements to fit my bus. The mounting bolt holes need to be between 29.5-32 inch from each other Ideally this would be a Class 4 or higher tow hitch. Curious if you have...