!Wildcat Maxx Travel Trailer  x   >   !PT Cruiser  x   >   Fastway  x   >  

Is this locking hitch pin class V rated? | Yes, it is. The Fastway Trailer Hitch Lock item # FA86-00-3160 will work with all 2", 2-1/2", and 3" hitches from class III up to class V. This locking pin has a 5/8" diameter and spans 3-5/8" between...

I have a 2016 Chevy Tahoe LT with standard suspension and a 2021 GulfStream Amerilite 189DD travel trailer. I had pulled this previously with a V6 Equinox with a simple hitch, no WD or sway control. Now with the Tahoe, I will at least need...

I upgraded my tow vehicle from a Ram 1500, which has a 2 inch receiver, to a Ram 2500 with a 2.5 inch receiver. Can I purchase a new shank only or do I need a whole new system? I currently have the E2 Trunnion 92-00-0800 system. | You do not...

This WD kit does not come with a shank. I have a 2inch shank, which appears similar to the separate Fastway shanks. Mine is from a Curt round bar WD w/ chains system. Will my shank work with thist Fastway WD system? are the bolt hole spacings...

Bought a dt hitch in 2018 for my f250 keys broke cannot get hitch out or adjust how do I get another set | To replace your DT Hitch Lock you'll just need the Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks...

Can I just replace the trunions and spring bars to upgrade from a 600 lb. tongue weight to 800 or 1000 lb? From what I can see, the other parts are the same. Thank you for your resourceful website. | Absolutely, the Fastway e2 weight distribution...

Will this work on a 34 1995 Airstream Excella 1000 Travel Trailer? | If your 1995 Airstream Excella 1000 Travel Trailer has a Bulldog Collar Lok style of coupler on it then yes, the EZ Lock Trailer Coupler Lock # BLTL-20-40D would fit and work...

Is it possible to remove one of the balls from this mount? If not, do you sell a mount with just a 2inch ball? I need to haul a trailer with the mount all the way down in the bottom hole, and the 2nd ball is so much lower that it drags the ground...

I have a fulton type reciever on my boat trailer with a square 3”! Nut on top to tighten the ball onto the hitch with a 2” ball! I am trying to find a lock for the boat hitch? | Sounds like you have coupler similar to the Fulton Fas-Lok part...

I have a 2015 Shasta Airflite reissue. I already have a Curt anti- sway bar installed. I am looking for a weight distribution hitch for it. The camper weighs about 3,000 and the tongue weight is around 300 lbs. What are the options that will...

Looking for a stainless 2inch receiver. Click on it but nothing comes up. 2inch 1 inch shaft | I'm not entirely sure what you're looking for, was it a trailer ball? If so, we have a 2 inch stainless trailer ball with a 1 inch shaft, part...

I have a 2021 1500 Crew Cab Ram with auto/air suspension. Looking to purchase this hitch assembly for my Ice Castle fish house that has a GVW of 7000#. I get trailer sway now and looking to eliminate that. I can get the trailer and truck...

I have a v-nose trailer with about 33-34 inches of distance on the top of the frame between the ball and where a top mounted bracket might interfere with the v-nose of the trailer. I could potentially go a hair longer with a side mount bracket. What...

What about a 2 square hitch opening? | I do have a solution, but we don't have a Weigh Safe 180 that fits a 2" receiver. Instead, I recommend the Fastway Flash Secure Adjustable 2-Ball Mount # DTALBM6600. This is incredibly similar to the Weight...

My Fastway e2 600 lb trunion bars have bowed a little after about 8 years /50k miles of use so now under distributed. Added a washer year ago but still under. Dry tongue weight is approx 450, gets up to 620 occasionally when travel fully loaded...

I have a DT hitch. Can the keys be replaced? It has E- 16 engraved on it. | I do have a solution for you but we don't offer this replacement key for your Diversi-Tech Ball Mount. That said, we do have a way for you to get new keys, it just requires...

Can you recommend a 2-3.5 inch lift kit for the trailer in this 2021-crossroads-rv-sunset-trail-ss331bh Also, will the GM trailer cam be compatible with the furion on board mount and work through the 7 pin? Thanks | Furrion RV camera systems...

Tow Vehicle:2021 Ford Explorer St 5600 tow, 560 tongue weight limits. Camper: 2020 Keystone Passport 239ML, Dry Weight, 4189:GVRW, 5400:Hitch 425, Length 255. Local towing maximum 50 miles to campground. What hitch would you recommend for this...

Hello my name is Ed and i wanted know what model of weight distribution hitch would be right for my truck and the trailer that I want to pull. I have a 2016 Chevy Colorado Z71 4x4, witch has ta tow rating of 7000 lbs. and I am looking to buy...

Hi, I do have trailer with total weight 7518 lb,it dry weight. What hitch with weight distribution and sway control I need. Thank you | Weight Distribution systems are recommended based off of tongue weight which is typically between 10% -...

Im curious about your keyed alike option. Can I get different locks keyed alike, or is that only for the same models? For instance, the Trailer Hitch Receiver Lock and the Fastway Universal Trailer Coupler Lock? Thanks! | We can key alike different...

Im comparing these: BWTS10050B and AM3413 I need a 1-7/8inch ball and a 2-5/16inch ball. AND I need a 10 drop. Do you have a product that meets both these requirements? I like the tri-ball, but I need another inch of drop. | I do have a solution...

Do you know where to purchase a anti rattle tightener for the fastway e2 equalizer hitch | The Anti-Rattle # BX88224 will fit on your Fastway e2 Weight Distribution # FA94-00-1061. |

I am looking at renting multiple trailers over time to see what is the biggest trailer I can safely tow with my 2019 Toyota Highlander SUV. Unfortunately, most renters of the smaller trailers do not offer a Weight Distribution Hitch w/anti...