!Monaco  x   >   Tow-Rax  x   >  

What kind of motorcycle carrier can i use on my 2017 honda accord coupe? | All of the trailer hitches that fit your 2017 Honda Accord are 1-1/4 receivers. I've linked our selection of carriers that fit the Class I hitch for you. The lightest...

what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer? | The Tow-Rax...

How is the tension on this? Am I going to have to roll the whole paper towel back up when I get back into my trailer? | The Tow-Rax Spring-Loaded Paper Towel Holder # TWSPPTH has a spring tensioner on one end that provides enough tension so...

What is the e track adapter that I would need to add to this to allow me to use this with my e track on the trailer? The e track will go side to side. Not front to back. | The Tow-Rax Wheel Chocks # TWSPWM that you referenced comes with installation...

Am looking for a hitch/trailer to carry the above scooter on, Believe weight is aprox 500 lbs, do you have any recommendations?? | For your Yamaha Majestic 400 Scooter, I recommend the etrailer Motorcycle Carrier # e98873. This carrier weighs...

What flahlight fits the wall mount holder item # TWSP135FLHOA? Thanks | The Tow-Rax Flashlight Holder # TWSP135FLHOA is designed to hold a standard D-Cell style flashlight like a mag light. It has an opening of 1-5/8" to hold a flashlight. |

I was going to mount mine into a semi floor and it is an inch and a half thick do you have any larger sizes | The part # TWSPWFKW comes with screws and anchors that are 1 inch long. You could still use this on a floor that is 1-1/2 inches thick...

Do the Erickson o-track anchors work in the Tow-rax track? I need a 6 foot track, but want the anchor rings parallel not perpendicular to the track. thanks! | Yes, I went and pulled a Tow-Rax Low-Profile Floor Track # TWSP72TA from our warehouse...

THis product - Tow-Rax Wall Mounted Folding Table - Aluminum - 45-1/2inch Long x 18-1/2inch Wide inch says it has mounting buttons to move it to another location. I read reviews and it seems like you can put these button to other locations...

I have had problems in the past with aluminum leaving dark marks on items that touch it. Is this table treated, or powder-coated, so it wont leave dark marks? Also, if installed in a home, is attaching to wall studs a requirement? | My technical...

Is there an option for a removable base plate or setup on this chock? Or is this only available as permanent placement. Do you have similar dirt bike chock that is removable? Thanks | The MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075...

I have a 2006 Harley Sportster 883. The front tire measures about 4 inches in width. Will the TWSPWM work with this tire? I also have a 2009 Honda Rebel and the front tire measures 3.75 inches. Will it work with that one also? Thank You |...

is this tie down system strong enough to be used on a trailer for the purpose of securing a large motorcycle for travel? | Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1 # TWSP72TA. This system...

Will this bracket Item # BWMC2304 work for my 2002 Honda VTX1800R? Harvey | The B&W Biker Bar # BWMC2304 is designed for Harley Davidson Motorcycles as of June 2018. We have another option that will work just fine for your 2002 Honda VTX1800R....

Is the bottom shelf tall enough for antifreeze jugs? | Yes, the bottom shelf of the Tow-Rax Aluminum Storage Cabinet # TWSP30CSA is deep enough to fit a standard antifreeze jug. In the picture I attached you'll see a car wash fluid jug in the...

Looking to install 2 of these wheel chocks in my toy hauler travel trailer. The floor is made of the chopped up recycled ply wood, probably 5/8” thick. Is there a reason for me to be concerned about these anchors pulling through? Only securing...

Cam you please provide full dimensions of the cup holder including material thickness? I did not come across dimensions of the upper back plate - I will need this to see if it will fit my application for mounting. Thank you! | I went out to...

Hi. Do you have any suggestions on how I could attach the L track to the bed of my Tacoma? It’s made out of a composite material. Would screws work in this? Thanks, | You could attach the Tow-Rax L-Track # TWSP6TAB to a composite truck bed but...

how wide is the base of the wheel chock? I need it the fit in a channel on my RV Lifts of America motorcycle lift. Thanks for the info. | The overall width of the Tow-Rax Wheel Chocks # TWSPWC3BT is 8-3/8 inches. I attached a picture that...

I own a 2018 HD TriGlide. I see that you stated the MC2301 will fit 2016 and older but not new TriGlides. is there a different one that will fit my 2018? | In order to secure your 2018 Harley Davidson Tri Glide I recommend using the Tow-Rax...

I have a mt70075 and my tire is to big too go on it. The base is to short. I have a kawasaki Vulcan 2000LT limited. Tire size is 150 x 30 x 16 and I was wondering if your MTMWC-01R would work. | The overall diameter of your tires is 19.5 inches...

I was wondering what type/size/length screws you used to install this shelf? I have the same sized plywood as what was used in the demo video. | There is actually a handy installation kit for Tow-Rax Aluminum Storage Cabinet # TWSP36CCA that...

How can Tow-Rax Floor Jack Mount - Aluminum be mounted in a pickup trailer? | To mount the Tow-Rax Floor Jack Mount # TWSPJSTAL to your pickup trailer you will find a spot that is as flat as possible. You will then drill through the Jack Mount...

I see the back is 5.25inch tall, whats the front height. My concern is putting a gallon of snowmobile oil in tray and tipping over going down the road. Im sure quarts are ok but what about gallons? Thanks | The height of the front portion of...