!LHS  x   >   !Jamboree Searcher Motorhome  x   >   EZ Coupler  x   >   BulletProof Hitches  x   >  

are all drain the same diameter on any make camper? ours is an older JAYCO EAGLE | The EZ Coupler RV Waste Valve Cap # F02-3106BK fits all standard 3-inch bayonet RV black water waste valves such as part # T58. Gray Water valves like # T1001D...

with ends on the hose how long can the hose be to compress down to fit this unit, ie: 10 ft. hose w/ends, 15foot hose w/ ends, etc. | The Valterra EZ RV Sewer Hose Carrier # A04-0150XBK referenced in your question can hold a hose that is up...

looking for an adjustable ball mount that goes to 8 inch drop and fits a 2-1/2 inch hitch | We have precisely what you need for an adjustable ball mount that fits your 2-1/2 inch hitch and gives you up to 8 inches of drop. The ball mount is...

Hello, I’m looking for a 13 to 14 inch riser. Do you sale a riser of that size? Do you custom make risers? | We have exactly what you're looking for! For your application you need an adjustable ball mount from BulletProof hitches. They have...

What is the Outside Diameter of the fittings not including the elbow of this hose set. My storage tube can accommodate up to 4-3/8. | I measured the fittings on the EZ Coupler RV Sewer Hose Kit # D04-0115 for you. On either end the overall diameter...

Hello, I want to add the Item # C79JR to my bullet proof hitch with the weight distribution adapter. The TW specified on the Item # C79JR says 1k TW, does adding it to the bullet proof hitch add to its TW capacity? Thanks | The weight capacity...

Good morning, I see you now carry a 36,000 lb. ball for tow vehicles. Is there a coupler available that matches the 36,000 lb. towing specification? | I believe by 36,000 lb ball you are referring to the 36,000 lb rated 2-5/16" ball that is...

Does this come with a cap for the hose connector | The EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Red Item # F02-3305VP comes with the cap for the end that drops into the dump station tube. Typically once you...

How does this shank differ from the one that comes with the full Bulletproof weight distribution system BPH46VR? | Ryan, the BulletProof Hitches Weight Distribution System w/ Sway Control # BPH46VR does not come with a shank, but the shank they'd...

lock kit for HD254 | To lock the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch # HD254 to your hitch receiver I recommend the InfiniteRule Hitch Lock # 34061072-D, but if you're interested in locking the platform to the ball mount as well...

Is the bullet proof weight distribution add on compatible with c17501 weight distribution hitch. | Yes, the Curt TruTrack Weight Distribution System # C17501 will work with the Weight Distribution Shank for BulletProof Hitches # 358WEIGHTDIST....

Will this adaptor fit the 12k equalizer wd system ,I already have the bullet proof hitch | Yes. The Weight Distribution Shank for BulletProof Hitches Adjustable Ball Mount # 358WEIGHTDIST can be used with an Equal-i-zer weight distribution...

what is the distance from center of ball to center of pin that attaches hitch to receiver. need min 10 inches | For your 10 inch minimum I recommend the BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch - 6" Drop/Rise - 22,000 lbs...

I have an 11-1/2 drop down, but my trailer still rides a little high, i need a couple more inches of drop. is there any product similar to this for use on travel trailers? C27KR | While we do have a solution for you, there isn't an adapter like...

This looks, and specs out, to be a very heavy duty hitch. My question to Etrailer is having the experience to compare against many other manufacturers and knowing reviews from customer testing, is the hitch durable and able to withstand heavy...

Hi- I’m trailer illiterate! I need sewer hose w/ fittings that connect to my septic system 75’. Living in trailer while I rebuild ranch, fire destroyed. Also H2o hose to feed trailer. Trailer 2004 skyline. | Your fresh water hose is an easy...

I am looking at Bulletproof hitches and trying to find out what the inside channel width is. I am hoping to find one that the inside is 2. Thanks, | The channel width of the BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch # HD204...

BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2inch Hitch - 6inch /Rise - 14,000 lbs Item # MD256. Does this hitch come complete with a 2inch and 2 5/16inch ball set up or is it sold separately. | The US made # MD256 BulletProof hitch...

Does anyone ma solid shank 2 1/2 in draw bar with 25k to 30k towing capacity? | Yes, BulletProof Hitches has several solid shank ball mounts for a 2-1/2" trailer hitches. The BulletProof Hitches Adjustable 2-Ball Mount part # ED256 for example...

The specs list the weight capacity at 30,000lbs. Just to confirm, is that the working load rating or the break point rating in which case the working load rating would be around 10,000? Thanks! | The weight capacity of the Bulletproof Hitches...

Regarding part# HD206 With this hitch on its lowest setting I’m needing it to have a 1.5” distance from the bottom of the 2” shank to the top of the 2 5/16 ball. If not I’m needing a 2” hitch that has the 1.5” distance from the bottom of the...

What are the actual dimensions of the pin? How far into the lock does the pin actually go? | The BulletProof Hitches Receiver Lock item # BPH54FR is 7-5/8" overall. The 5/8" portion that goes into the receiver is 4" long so it will work with...

I need a simple hitch pin for the bulletproof ball mount I got from you guys. | Thanks for reaching out, I'd be happy to help you find a hitch pin for your BulletProof Hitches 2-Ball Mount for 2" Hitch # BPH64FR. For a simple option I recommend...

Require 16inch top of hitch to bottom. Prefer 2 1/2inch but currently 2inch with . | I believe I have what you need. The BulletProof Hitches Adjustable 2-Ball Mount for 2-1/2" Hitch # HD2516. This ball mount is adjustable for a 16" rise or a...