BulletProof Adjustable Ball Mount That Can do 3-1/2 inch Drop
Published 10/03/2023
Products Featured in This Question
Question:
Regarding part# HD206 With this hitch on its lowest setting I’m needing it to have a 1.5” distance from the bottom of the 2” shank to the top of the 2 5/16 ball. If not I’m needing a 2” hitch that has the 1.5” distance from the bottom of the 2” shank to the top of a 2 5/16 ball for correct ride height. Looking for 16k to 22k lbs capacity if possible. Thank you.
asked by: Michael M
Expert Reply:
In the traditional way of measuring rise/drop the BulletProof 2-Ball Mount part # HD206 can do a drop of up to 7-1/4 inches. This would be measured from the top of the hitch opening/ball mount shank down to the base of where the hitch ball sits on the ball mount platform. So using the dimension you mentioned the standard drop dimension you would need is 3-1/2 inches. The # HD206 can do the drop you need but not in it's lowest setting.
For a version of this that is closer to what you are looking for the part # BPH64FR can do a drop of 4-1/4 inches when in it's lowest position.
Product Page this Question was Asked From
BulletProof Hitches 2-Ball Mount for 2" Hitch - 7-1/4" Drop, 7-1/2" Rise - 22,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- Two Balls
- 2 Inch Ball
- 2-5/16 Inch Ball
- Steel Shank - Matte Black
- Drop - 7 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 12000 lbs GTW
- 22000 lbs GTW
- BulletProof Hitches
more information >
Continue Researching
- Shop: BulletProof Hitches 2-Ball Mount for 2" Hitch - 4-1/4" Drop, 4-3/4" Rise - 14,000 lbs
- Video: etrailer Yellow Water-Resistant Bag for Tools Review
- Q&A: Clevis Hitch For a 2" Hitch with a 2,000 lb. Tongue Weight Capacity and 2-1/2" Tang Spread
- Q&A: How Much Drop and Rise Is The BulletProof Hitches 2-Ball Mount # BPH64FR Capable Of?
- Search Results: reciever locks
- Search Results: 605dat
- Shop: Replacement Lift Cylinder for UWS Toolboxes
- Shop: etrailer 18" Large Zippered Tool Bag for Towing Accessories - Water-Resistant - 15 Liter
- Search Results: convert~a~ball
- Video: Review of the BulletProof Hitches 2-Ball Mount for 2" Hitch
- Shop: Andersen Trailer Hitch Lock and Adjustment Pin Lock Set - EZ Hitch and EZ HD Ball Mounts - Stainless
- Shop: Convert-A-Ball Interchangeable Ball Set - 2" and 2-5/16" Balls - 1" Shank - Nickel
- Shop: Convert-A-Ball Interchangeable Ball Set - 2" and 2-5/16" Balls - 1" Shank - Stainless
- Shop: Convert-A-Ball Interchangeable Ball Set - 3 Balls - 1" Shank - Stainless
- Q&A: What are the Dimensions of Curt Hook with Spring Loaded Safety Latch # C81840
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: How to Measure for Trailer Hitch Drop
- Video: A Closer Look at the Curt Hook with Spring Loaded Safety Latch for Safety Chains and Cables
- Video: A Closer Look at the 42" Long Safety Chain with 5/16" Clevis Slip Hook
- Video: Stabilizer Jacks Review
- Video: In-Depth Review of the Square A-Frame Jack w/ Footplate
- Video: In-Depth Review of the Replacement Pins for BulletProof Hitches Adjustable Ball Mounts
- Search Results: dry bags dry storage
- Search Results: 15"x6" rim 5 on 5 1/2
- Q&A: Do You Carry a Replacement Switch for You etrailer Jacks, What if Mine Goes Out?
- Q&A: Do The etrailer Electric Trailer Jacks Have A Manual Backup Option?
- Q&A: Wiring Diagrams for Hydrastar Electric Over Hydraulic Trailer Brake Actuators
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Installing Brake Controller in 1995 Ford F150 with Aftermarket 4-Way Trailer Connector
- Article: Trailer Wiring Diagrams
on Drop Hitch
