!LHS  x   >   !Jamboree Searcher Motorhome  x   >   !Braxton Creek  x   >   TruRyde  x   >  

I have a lipter axle model number lci35-sb-88-68.5-nosp-us-l-545-7242 on my trailer and Im looking for a replacement, what would be the best option to stick with the same weight rating | My friends at Lippert have identified your axle as being...

Hello. I have a small boat trailer with 5 bolt wheels on a 4.5 inch circle and EZ Lube spindles, without brakes. The spindles measure 1 and 1/16 inches for the inner and outer bearings and the surface for the seal measures 1,25 inches. I...

I need a dust cap that is 1.934 dia and 1.25 tall is there something avaliable in that size Thanks | It looks like the Fulton Grease Cap - 1.786" Outer Diameter - 1-9/16" Tall # F001503 is going to be slightly too small for your needs. The closest...

Hi folks, is there really a difference between the 010-036-00 and the 010-054-00 Dexter seal...where either one would work in any same sized application? Thank you, | The only difference between the 010-036-00, our part # GS-2250DL, and the...

looking to replace this axle. information below is from axle tag. spec, Lippert components LCI35-db-95-76-nosp-us-l-545-7242-18PT-3 serial# 241-000097956 mfg Date 11-10-15 van amt# V000234941 3500 lbs axle 95inch hub face 75inch spring centers...

can I replace a eq 310 with a tsw eq 1 | The correct replacement for a Dexter 13-10 Equalizer is the Triangular Equalizer part # TREQ310, not the Curved Equalizer part # TREQE1. If you want to upgrade, the Equa-Flex Cushioned Equalizers part...

I have an old 1949 or 1950 TeeNee boat trailer that needs a 3 1/2” short hub with 4 bolt pattern. Will this one work ? | I have a solution for you, but as the short spindles have not been produced for some time now, there will not be a hub that...

Noticed that while my old boat trailer specs call for a Chicago Rawhide 12407 seal with an id of 1.25inch and an od of 1.979, most replacement seals similar to this and even cross referenced to that model number now have measurements of 1.249inch...

I have sea Doo speedster 2007 , what bearing covers I need ,because I lost both of them... | The best way to ensure that you get the correct size is to use a Digital Caliper # PTW80157 to measure the hub bore diameter on your 2007 Sea Doo Speedster...

1991 escrt Need a axle | I would be happy to help you find the correct replacement axle for your 1991 Escort trailer, but unfortunately we do not have a break down of the specific components your trailer uses so you will need to verify a few...

Providing my axle is 2 3/8 are these the parts I need to mount it? Are they all compatible? APS1 PR4B APUBR-1 TRSS238 | The parts you referenced are compatible with each other. Hanger Kit # APS1 works with 1-3/4-inch wide leaf springs like #...

One of the spindles when greasing the grease comes out around seal instead of outer bearing. New seals ,bearings and race. | It is possible that you have single lip seals and need to replace them with double lip seals to avoid the grease leaking...

I’m hoping to find out what axle I have, the tag says, Dexter axle P- 16 Model. SLR SN D 8237801 Looking to replace with a complete axle kit. Thanks for any help. | Thanks for the information! Based on the information you provided my contact...

I have a kayak trailer with 2 K hubs 5 x 4 1/2 with a grease zink fitting on the back side. the front side looks like an EZ lube with rubber cap. this allows grease to flow out. Have been unable to find a Spindle Grease Seal Set to fit....

Could you confirm that AK1HUB-545-35-K hub fits TRU24R spindle? Thanks. | Yes, I can confirm the Trailer Idler Hub Assembly part # AKIHUB-545-35-K will work with the #84 Spindle for 3,500-lb Trailer Axles part # TRU24FR. |

I have a 4 X 6 Carry On trailer with 4 bolt hubs. I would like to change the hubs to 5 bolt to allow 15inch wheels and tires. I am removing and replacing the fenders to facilitate the larger size. I am NOT looking to increase capacity, just...

I need inner and outer seals. I have a homemade trailer that uses Timken tapered bearings 09067/09195. Do you have least expensive bearing hub seals that would fit 3/4 inch spindle and 1.938 inch outer hub? I need 2 sets of inner and outer...

Hello, I have a 50 yr old boat trailer that I’m replacing all the spindles due to wear. The trailer has 1-1/2” Solid square axles. The trailer has a 4” and the spindles look like they were machined before the s were formed onto the axels....

Hello I have a 5X10 SnowBear utility trailer, 2000# axle. I need to replace the complete hub and spindle. Do you know which one I would need? Thanks | We do have spindles and hubs for 2,000 lb axles, but we first want to determine which...

Is a 21334tc seal interchangeable with the 21334tb | According to my research the Transcom part 21334TC is an oil seal with a 2.125" inner diameter and a 3.372" outer diameter and the Transcom part 2133TB is a grease seal with a 2.125" inner...

What size socket works with this castle nut? | The TruRyde Spindle Nut # 165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached...

I have an 08 coachman chaparel 34b. My problem is the caps on the wheels are rusted and look terrible. I believe thses caps are for looks only as I have taken the center plastic center off and looked at the hub center which appears to be the...

What round spindle fits hub #42865UC1? | There are two spindle options for the Trailer Hub Assembly, part # 42865-KIT. The spindle used would depend on the capacity of your axle. For a 5000 pound axle, use part # TRU57FR. For a 5200 pound...

Do TruRyde grease cap plugs RG04-010 , fit Redline RG04-040 1.986 OD, EZ lube grease caps? | Yes, the # RG04-010 grease cap plugs are a great fit for the 1.986 inch outer diameter # RG04-040 grease caps. |