Can I Use HappiJac Brackets With Another Brands Camper Jacks
Hi, I recently purchased reico-titan manual corner 2000lb. jacks new for a project and now in need of mounting brkts. i have found many ways of approaching this but i want to make it somewhat easy as possible .. i question the statement i...
Fifth Wheel Trailer to Gooseneck Hitch Adapter Recommendation for Riverstone 38RE
Hi, I am looking at this adaptor to use to tow my Riverstone 38re. My truck is a 1988 Ford f350 superduty super cab withe the 7.5 gas engine. [460 The trailor is close to 18000 loaded. The truck has a 2 5/16 ball in the bed. Would this...
Underbed Installation Kit and 5th Wheel Hitch for a 1989 Ford F-250 w/ 8' Bed
I have a 1989 Ford F250 Super Cab 3/4 T 4x4 8 ft bed with lift springs. I have a 2001 Keystone Springdale 242 RL 5th wheel trailer GVWR 7880 lbs. What hitch is recommended with below bed rails? | The only 5th wheel hitch that we have that...
Recommended Heavy Duty Snow Tire Chains For a 1986 Ford F-350 With 235/85R16 Tires To Plow Snow
I am looking for snow chains of heavy quality for a LT235/85R16. The 1986 Ford F-350 is used for plowing snow. I see you have chains for a 1988. Will those fit a 1986 and if not what do you recommend. Single tire, not dual. | I recommend...
What Is the Wall Thickness of the Yakima RoundBar
I understand the OD of a Thule/Yakima round bar is 1-1/8, but Im curious about the wall thickness and material. Can you help with any insight? Thanks, | I spoke with Yakima, and they told me that the wall thickness of their RoundBar Crossbars...
How Does Draw-Tite 2-1/2 Inch Trailer Hitch Install on a 1988 Ford F-250
I do not have the holes on the bottom side of the fam. | Drilling is required to install Draw-Tite trailer hitch # DT45502 on a 1988 Ford F-250. You will need to drill eight 1/2 inch holes to secure the hitch to the bottom of the vehicle frame....
Comparing Wheel Chocks For 1990 Ford F-250 Parking On Steep Incline
We are looking at your MaxxTow wheel chocks MT70072 or the Race Ramps RR-WC-2 to use with a Ford F250 parked on a steep incline? We want something in a solid rubber but werent sure if those would be the appropriate size and which would be better....
Is DeeZee Truck Bed Mat # DZ86645 Custom Fit for 1980-1986 Ford F-150/250/350
Do you have any pictures the mat installed in a 1980-1986 7th Generation F150/250/350? It says it fits the 1975-1996 F-series but, I know the box dimension specs are not exactly the same just close for the 3 generations of trucks. Some boxes...
Does Ultra Fab Landing Gear kit part # UF17-943010 Have Capacity for Trailer that Weighs 14,730 lbs
this support the rv, or will I need to find heavier duty landing gear for my 5th wheel? Thanks | The pin weight of a fifth wheel trailer is normally right at 20 percent of the total trailer weight. If your trailer weighs 14,370 lbs it would...
Torklift Front Tie Down for 1991 Ford F-250 4x4 Long Bed without Running Boards
Is TLF 2000 the correct tie down for a 1991 F250 4x4 Long bed super cab no running boards? | Yes, the Torklift front tie down part # TLF2000 is the correct front tie down for your 1991 Ford F-250 long bed, 4x4, super cab, without running boards. |
Brophy Camper Tie-Down Compatibility with 1986 Ford F-250
I have a 1986 f250 will this work on it | The Brophy Clamp On Camper Tie-Downs - Bed Mount - Zinc Plated Steel - Qty 4 # HSBP will work well for your 1986 Ford F-250. You may also want to consider the Brophy Basic Turnbuckles w/ Hardware for...
Recommended Trailer Hitch Receiver For 1990 Ford F-250 with Spare Tire
Will the Curt hitch C15300 work on my 1990 F250 without geitting in the way of the access to the spare tire? I see that the 14001 hitch states that spare tire may need to be moved for installation, while the C15300 says that some vehicles may...
Fit of Curt Class V C15300 Hitch on 1986 Ford F-350
Looking for a trailer hitch for a 1986 Ford F-350 dually diesel club cab 2x4. Will the c15300 hitch work? | It sure will. As long as your truck isn't a cab/chassis mode and doesn't have roll pan bumper, the Curt Class V hitch # C15300 will...
What Grade Steel is U-Bolt of U-Bolt Kit # SP01-080 Made From
Can you tell me what material grade these U-bolts are made from? | The U-bolts of the U-Bolt Kit part # SP01-080 are Grade 5. |
1987 F350 with 34 inch Frame Hitch Recommendation
I was looking at the curt hitch C15300 and it said it fit a 37.25, my truck has a 34.25 frame, do you have a hitch for this truck? | The 34 inch frame like what you have is typically found on the cab and chassis models of trucks. The hitch...
Can a Trailer Hitch Be Installed on a Modified 1988 Ford F-150, 250, or 350
My concern is where the receiver will be located in relation to the modified bumper on my truck. What is the dimension from the mounting tabs to the center of the receiver? See attached photo. | On trailer hitch # 75038 it measures approximately...
B&W Gooseneck Hitch for a 1989 Ford F-350
Will it fit in a 1989 f350 | The B&W Turnoverball Gooseneck Custom Installation Kit # BWGNRM1319 that you referenced is for a Ram 1500 so it isn't compatible with your 1989 Ford F-350. Instead you want part # BWGNRK1110 if you have the Overload...
Recommended Hitch Plate Bumper for Ford F-350 Cab and Chassis w/ 34" Frames
will this item fit my 86 F350 Chassis cab? Thanks | I have a solution for you but the Buyers Products Hitch Plate for Pintle Mounting item # 3371809030B only fits 1999 and newer Ford F-350's. For your 1986 F-350 Cab and Chassis you will want...
How to Determine Curt Hitch C15300 Clearance with Rear Skid Plate on 1987 Ford F-150
MY1987 Ford 150 has skid plates on my rear gas tank can I install your C15300 with out removing the rear 1/2 of the skid plate. This truck has 2 piece skid plate. | Curt Class V hitch # C15300 is a confirmed fit on your 1987 Ford F-150. To...
Adjustable Ball Mount Recommendation for 2018 Ram 3500 with 2-1/2 inch Hitch
18 Ram 3500 Factory 20 wheels, What would be an adequate drop on an adjustable ball mount ? | For your 2018 Ram 3500 with a 2-1/2 inch hitch the B and W adjustable ball mount that would be the best option would be the part # BWTS20040B which...
Buyers Products Gooseneck Safety Chain U-Bolt Kit Dimensions
How long are these u bolts I have a 1 inch plate under my bed I want to make sure they are long enough | The Buyers Products Gooseneck Safety Chain U Bolt Kit # 337BRB03 has an overall length of 5-5/8 inches and a length of 4-3/4 inches that...
How to Attach Pipe to Cam-Action Lockable Door Latch Kit
How do I put the cams on the ends of the pipe. what kind of pipe.??? | The Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers # PLR458-018 you referenced will need a schedule 40 3/4" steel pipe to be welded on to the cam ends as...
Underbed Mounting Brackets and Hardware Only for 5th Wheel Hitch Installation on a 1985 Ford Truck
Which mounting parts do I need for a reese 14k. Its going on a 85 ford long bed. I have the hitch abd thw rails. I dont have the brackets for the frame or the bolts either | Since you already have the rails and the hitch, all you will need is...
5th Wheel Base Rails Needed to Mount in the Bed of a 1988 Ford F350 for a RBW Hitch
hi . i have a 1988 ford f350 and need lower rales to fit my r.b.w. fitheheel hitch . what do you offer for lower rails to fit wat i have ? THANKS | To install Curt base rails in the bed of your 1988 Ford F-350 you will need the Curt universal...
Filter Your Search
Contact and Help