Can the Pro Series Solo Steel Cargo Carrier be Used on a 2010 Mitsubishi Endeavor with 2 Inch Hitch
Although this item is rated for 400 lbs, can I still use this product with my Class 2, 2 inch hitch on my Mitsubishi Endeavor as long as I keep my load under the 350 rated tongue weight? | As long as you keep the total weight of the carrier...
Recommended Trailer Brake Controller For 2004 Mitsubishi Endeavor
Do you have an instructional video on installation of trailer brake controller on 2004. Mitsubishi endevor | I have included a video of a trailer brake controller being installed in a different vehicle, but we have not had the chance to install...
What Size are the Bolts for Curt Trailer Hitch, # 13113 for a 2006 Mitsubishi Endeavor
what size are the mounting blots for the mitsubishi endeavour? | The bolt sizes for the Curt Trailer Hitch, # 13113, can be found in the instructions. I have included a link to the installation instructions and a video install below. |
Trailer Hitch and Wiring Recommendation for 2007 Mitsubishi Endeavor
Good afternoon, I am contacting you today because I am getting out if the military and moving back home. I drive a 2007 Mitusibushi Endeavor. I am Interested in a 2 in receiver, and the 4 pin flat trailer light hook up. With a Max tow weight...
Tire and Wheel Combination Size 205/65-10 with 4 on 4 Bolt Pattern
Im looking to replace the wheels and tires for my 1974 Apache Royal Trailer, but am not seeing the right item on your site. They are 20.5 x 8.0 x 10.0 which I see tranlates to 205/65-10, but the bolt pattern is 4x4 and the trailer has a dry...
Does Curt Trailer Wiring Kit for 2007 Mitsubishi Endeavor Work with LED Trailer Taillights
I have a 2007 Mitsubishi Endeavor AWD. I purchase a new trailer with LED lights on it. The plug works ok when plugged in to a trailer with regular lights but does not work when plugged in to the new trailer plug that has LED. Does your wiring...
Can Roof Rack Cargo Bag, # HE3021 Be Installed Directly on the Roof of a 2004 Mitsubishi Endeavor
Question about this cargo bag item #HE3021: Does the bag come in different optional colors? Since it has a rubber bottom, can it be placed directly on the SUV roof between the the 2 roof rack bars without causing damages to the car roof?...
Right Side Trailer Lights Not Working After Installing a Wiring Harness on 2011 Mitsubishi Endeavor
ordered 2011 Mitsubishi wiring harness from e-trailer for my suv. . also ordered trailer hitch which is working great, installation was a breeze for both. only one side left of my trailer lights are working. would poor grounding cause...
Recommended Towing Mirrors for 2016 Chevrolet Colorado
Looking for the best trailer mirrors for my 2016 Chevrolet Colorado. I previously had a pair of the mirrors that slipped over the existing mirrors on my Ford F-150 and were very satisfactory.. They dont seem to have anything similar for the...
Will a Trunk Mount Bike Rack Fit on a 2008 Mitsubishi Endeavor and Not Scratch It
Wil this bike rack work on my 2008 mitsubishi endeavor and not scratch it? | The Thule Passage trunk mount bike rack # TH910XT is a fit for the 2008 Mitsubishi Endeavor. However, it is possible that this or any trunk mount bike rack can cause...
Brake Controller Recommendation for 2007 Holiday Rambler Endeavor
What harness number do I need for a for prodigy controller to fit a 2007 holiday rambler endeaver | The brake controller wiring you need is terminated in a connector under the left side control panel next to the driver seat of your 2007 Holiday...
Brake Controller and 7-Way Recommendation for a 2004 Mitsubishi Endeavor
I emailed quite some time ago about which parts are needed to install a brake controller and 7-pin wiring harness on my 2004 Mitsubishi Endeavor Limited. The vehicle came with the towing package and am currently towing with my 4 pin that came...
Trailer Hitch Recommendation for 2007 Mitsubishi Endeavor
which hitch would i need for 2007 misubishi endeavor . | For your 2007 Mitsubishi Endeavor you would need the Curt hitch part # 13113 which is confirmed fit. I have attached an install video for the # 13113 hitch which will walk you through...
Trailer Wiring Harness for 2004 Mitsubishi Endeavor
Im thinking about getting T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - Mitsubishi Endeavor, 2004 My Endeavor does not have the trailer package. I was reading on other sites that their cable would not work because I did not...
Installing a Brake Controller in a 2002 Holiday Rambler Endeavor
I have a 2002 Holiday Endeavor. I am wondering what wiring harness I would need to install a Brake Controller, and where would I find the plug to plug into on my motorhome. | A brake controller is going to need to be hardwired into your 2002...
Is the Yakima SkyBox Rooftop Cargo Box # Y07336 Completely Waterproof
Is this box waterproof? | In the strictest sense of the word, "waterproof" would mean water absolutely cannot enter a product. In reality there will always be some circumstance where some moisture could enter a product like a cargo box, even...
Boat Trailer Lights Not Working when Connected to a 2011 Mitsubishi Endeavor
Ordered the trailer wiring kit for my 2011 Mitsubishi Endeavor. Hooked it up and finally got to camp. Plugged it into my boat trailer. It doesnt work. Lights on trailer work plugged into my truck 3 weeks ago. What can I check or do I send it...
Socket Size for Installing Curt Trailer Hitch 13113 in 2008 Mitsubishi Endeavor
What size torque wrench is needed for installation | The Curt Trailer Hitch Receiver # 13113 that fits your 2008 Mitsubishi Endeavor will require you to use a torque wrench with an 18mm socket. You will need to torque all M10 fasteners to 48...
Does Draw Curt 13313 Have Capacity for 3,200 lb Boat
Hi, Was wondering if this would be suitable to tow a boat and trailer weighing 3200 lbs? Also does it come with the wiring harness and instructions how to install? | The Curt trailer hitch part # 13313 has a 3,500 lb towing capacity so it could...
Where Does the 4-Flat Connector from Wiring Harness # C56039 go on a 2010 Mitsubishi Endeavor
Maybe it will be evident after I open the car up, but is there a slot to fish the wires from inside the vehicle to the undercarriage? Documents only describe connection inside the car. | There may be an access point to fish the 4-flat connector...
What Size Hole Is Needed For Installation Of Optronics Flush Mount 4 Inch Round Light # STL23R-24B
I would like to install these flush mount tail lights and need to know the diameter of the hole. Will a 4 hole saw provided the needed holes size or does it need to be slightly larger? My application was previously surface mount lights but I...
Hitch and Wiring Installation on 2008 Mitsubishi Endeavor
trailer hitch instalation and wiring harness | For the 2008 Mitsubishi Endeavor, I would recommend the Curt Class 3 receiver hitch, part # 13113. To provide lighting for your trailer, we recommend the 4 Pole Harness and Hardwire Kit, part #...
Electric Brake install 2000 Coleman Sedona
I have a 2000 Coleman Sedona popup camper. Ive verified it has the Dexter 2000 lb axle. Ive also verified it has the backing plate with 4 holes on each side behind the tires so it will accept electric brakes. Currently it doesnt have any brakes...
Do I Need To Lower My Muffler To Install This Hitch?
I have a 2008 Mitsubishi Endeavor I want to put a hitch on it but my muffler is directly or almost directly blocking one of the hose for the hitch do I reroute my exhaust or do you make a hitch that goes around it what to do | Hello, We have...
Filter Your Search
Contact and Help