Summer Starts Here - Save up to 70%
Do the Jaws of The B&W Companion Automatically Open and Shut When Hooking Up
b&w does not have a auto locking for there 5th wheel hitches ?? | The B&W Companion 5th Wheel Hitches like part # BWRVK3305 For the 2019 Ford F-350 Super Duty with OEM prep package does not automatically auto lock when hooking up your trailer....
Troubleshooting In-Bed 7-Way Trailer Connector on 2019 Ford F-350
The 7 wire plug on bumper is working but the plug for 5th wheel has no power | An aftermarket in-bed wiring harness like # 41157 installs by plugging inline between the factory harness and the factory 7-way mounted on the bumper as shown in...
Reese Bracket Kit for 5th Wheel Trailer Hitches & 2021 Ford F-350 Super Duty
I have superduty with a 6 3/4 bed looking for the mounting brackets for a Reese #30083 | Yes, we have that available with the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches # RP50074. These custom brackets reduce the...
Suction Cup Mount Recommendation for Mounting Furrion RV Observation Camera System # FOS05TASF
2017 open range 376 FBH, 2015 f-350 xl Would have to utilize suction cup I think, otherwise would have to drill into dash. Also suspect the 7” screen could be cumbersome when transporting 6 folks. What’s your opinion? | Using the suction cup...
Underbed Rail Adapter to Install Reese 16K Slider Hitch in 2019 Ford F-350 with OEM Pucks
I have a 4 year old Reese 16k Slider 5th wheel hitch. I have a 2019 Ford F350 with the 5th Wheel Puck System. What is the part number and cost for your Adapter Thank you | To install your Reese slider hitch like # RP30075 in your Ford F-350...
Which Gooseneck Ball for Ford F-350 with Rail Kit for Use with Andersen Ultimate Connection
I see this question has been asked, but answered twice by two different people. One says all the hitch balls work and the other answer is the BandW and the curt ball won’t work with the Andersen due to them sitting up too high not allowing the...
Diagram with Dimensions for Curt Weight Distribution Shank C17132
Is there a drawing of this shank which show its measurements for overall height, length, measurements between holes, measurements from hitch pin hole to first adjusting hole, etc.. similar to the drawing for C17122? | The Curt Weight Distribution...
Swagman E-Spec Fat Tire Adapter
I am interested in this rack Swagman E-Spec Bike Rack for 2 Electric Bikes - 2 Hitches - Frame Mount Item # S94FR I have a 4 fat tire Rad Rover, which tire adapter do I need to make this work for my bike. thanks | The correct fat tire adapter...
Locking Pins for B&W Tow and Stow To Fit a 3 Inch Receiver Tube
Will the pins labeled for the 10k and 14k hitches work with the 21k hitch for 3” receivers? | The B&W Tow & Stow 3-Ball Mount only needs one hitch pin lock, part # WS05 if you have a 5/8" hitch pin hole. The reason for this is that the hitch...
Can the 5th Airborne Premium Pin Box Be Used with a Demco Hijacker Autoslide 5th Wheel Trailer Hitch
Will a Demco hijacker 21,000 autoslide hitch work with a 5th Airborne 21,000 pinbox? | Yes, you can use the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider part # DM8550035 or part # DM8550037 with the 5th Airborne Premium Fifth Wheel...
Cushioned Pin Box for Lippert 1621 that is Compatible with Andersen Ultimate AM3200
Will this product will with a Flex air 5th wheel pin box Lippert 1621? | Lippert states that the Curt Flex Air 5th Wheel Pin Box # LC328484 cannot be used with any type gooseneck/5th wheel adapter. This would include the Andersen Gooseneck to...
Why Weld or Bolt On Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter
Is it recommended in the instructions to spot weld 4 one inch welds or use 4 bolts to fasten. I can do either witch is better? | When installing the Andersen adapter part # AM3100 you either want to use 4 1-inch tack welds to the pin box or...
How Many DeeZee Crossover Toolbox Mounting Kits Are Needed To Mount a Tool Box on a F-350
How many of these kits are required to mount to a 2018 F350? 2 kits ? 2 bolts for both sides? | You only need one of the DeeZee Crossover Toolbox Mounting Kit part # DZ97910 to install your toolbox as there isn't going to be a ton of back...
Ladder Rack and Tonneau Cover Options for a 2019 Ford F-350 Super Duty
Need an opinion if it will work with my bed cover the sliding track rack I’m trying to purchase. Thanx hope to hear from you guys soon. Item #th43003xt-000ex that I’m I want to purchase. | The Thule TracRac SR Sliding Truck Bed Ladder Rack part...
Can Lippert Motor be Used to Replace Atwood Landing Gear and Motor 75721
I was told by Liebert and stromberg-carlson that their motor and gearbox is will not work on Atwood. Can you explain your claim of that they will | I reached out to my contact at Lippert who said that replacing the motor alone with a Lippert...
Recommended 5th Wheel Rail Kit and Hitch for 2015 Ford F-350 Diesel
Help * * I need a fifth wheel hitch but which one?? I have a 2015 F350 Diesel....just bought a fifth wheel.....about 13000 pounds when full. What measurements do I need to take to figure out what hitch I need. I want the above bed system...but...
Could RoadActive Suspension Kit be Installed with Air Lift Air Bag Kit
I have a 2015 F-350 DRW. Ive already installed the airlift load lifter 7500xl part# AL57596 and I am wondering, 1will these two products work together 2if they do work together what if any benefits would come from having both of these. | It...
Does Reese Goose Box Will Work in 2019 Ford F-350 Short Bed
2019 f350. Conflicting answers in the QA...will the Goose Box work with a standard bed F350? | Reese Goose Boxes are not specific fits for vehicles, though for a standard bed (short bed) truck like your 2019 Ford F-350 Super Duty it is a virtual...
Reese Goosebox Loses Air After Sitting for a Few Days
My 16,000# Reese Goosebox loses all of its air pressure after 3 or 4 days while the 5th wheel is unhitched and leveled while camping. I do use a BAL gooseneck tripod stabilizer under the goosebox which works very well in preventing shaking movement....
Recommended Hitch Reducer To Use 2" Weight Distribution Shank in 3" Trailer Hitch Receiver
Hello, last summer I bought the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW EQ37140ET from your guys. Now this came with a 2 shank. I just upgraded to a Ford Super Duty that has a factory 3 receiver....
Does Curt A25 Slider Hitch Fit 2020 Ford F-350 Short Bed
Looking for up to date info. Does Curt 5th wheel C16020 slider fit 2020 F350 Short bed? How much does it weigh? I will be pulling a trailer over 16500#. So I see that a A25 head should work? Weight of that? But could an A20 head also be used?...
Recommended Trailer Coupler Lock With 2-1/2" Span That Can Be Keyed Alike
Can I get 4 or 5 of these all keyed alike? MaxxTow Coupler Latch Lock for Surge Brake Actuators - 2-1/2 Span - 1/4 Diameter Item # MT46FR Thanks | I have another option for you but the MaxxTow Coupler Latch Lock for Surge Brake Actuators...
Recommended Disc Brake Kit to Replace Electric Brakes on Fifth Wheel Camper
I would like to convert my 2017 VanLeigh tandem axle fifth wheel 7K Lippert axle to disc brakes. Do you offer a complete kit including brake lines with a Dexter actuator and Kodiak Dacroment 13 hubs? Thank you for your help. Dennis | We have...
How To Reset a Lippert Controller 13398-C2
I have one that needs reset but the semi clear button in the hole is missing. Can I use a sharp pointed object to push where the button was instead? | I don't know if I fully understand your question about the Lippert 13398-C2 in wall control....
Filter Your Search
Contact and Help