!300M  x   >   !Diamante  x   >   1975  x   >  

Hi, I like to know if a bicicle Cannonade Scapel 2015 size S, will fit with out having to remove the front suspention in: Thule Pack n Pedal Round Trip Transition Premium Bike Travel Case - Hard Shell Item # TH100502 Please let me know. Regards...

i am mounting tail lights in 1/8 diamondplate. is this the product i want? i just want to cut the holes and mount with a rubber grommet. i do not want to have to attach light in back or anywhere else. your video explains nothing about mounting also...

where do you find the installation instructions for RA98235 I have a 1975 Ford Bronco | I spoke to my contact at Rampage and installation of the Rampage Safari Island Topper, # RA98235, is pretty basic so they do not have written instructions...

I was wondering if there was any kind of a hidden gooseneck hitch or gooseneck hitch in general for a 1975 f250 crew cab with the 34 inch frame? | There are no direct-fit goose neck hitch options for your 1975 Ford F-250 crew cab. However you...

Im trying to install a 5th wheel hitch. I have the universal mounting brackets but the ones that mount under the bed arent making any sense! The dont look like the ones in the picture but I am trying to get this mounted and set up by Monday...

I have a 1975 Dodge D200 2 wheel drive with 8 foot bed. what is the measurement from end of bed to rear base rail. I am installing a Reese 14k 5th wheel hitch with universal mounting kit. | Using Reese universal installation kit # RP30035 on...

1975 Ford F250 long bed- can I put in a fifth wheel hitch in that truck? | Sure you can! To install a 5th wheel hitch in your truck bed, you'd need the Reese Universal 5th wheel install kit, part # RP30035. The instructions relating to your...

I have the 34 in from outside to outside of the frame rails but from the end of the frame to the spring shackle it is only 14-1/2 inches I have a 1975 GMC 25 serra grande is there a solution to this | Since the Draw-Tite Ultra Frame Class IV...

Bx4322 will it for my1975 ford van | The Blue Ox Rangefinder II tow bar (BX4322) is compatible with adapter # RM-037 if you are using Roadmaster base plates on your 1975 Ford Van. However, neither Roadmaster nor Blue Ox have custom fit base...

looking for a way to flush-mount this light. am using with 4 inch round grommet mounted 435800 tail lights would like it to have the same profile.. can this be done or do you have another 2inch light to suggest. i dont want it to stick out...

I am looking for a trailer hitch for my 1975 Ford F250 4th High boy with 34inch frame. Can you recommend any that would fit? | Yes, the Curt Hitch part # 13028 would work on your 1975 Ford F250 with a 34 inch frame. I confirmed this with Curt....

We have a 1975 dodge coachman sportsmen and hooked up lights and we cant get brack or back up lights | It sounds like you are having trouble with the signals on the trailer connector on your 1975 Dodge van conversion RV. The type of trailer...

Looking to see if someone makes a class 4 or 5 that might fit a 1975 K5. I have factory bumper and would prefer it to fit tight underneath. Im ok with a little extra work to get a 4 or 5 to fit. thanks | I do have a solution for you. However,...

Front mount. I was wondering if this unit would bolt to the front frame so I could install a hitch to put a generator on | The Curt Trailer Hitch Receiver # 13028 does bolt onto your 1975 Chevy C/K Series Pickup, but it is a rear-mounted trailer...

Can I install a goose neck hitch below bed? 1975 Ford F250 8 foot bed | We do not have any under-bed gooseneck hitches for your 1975 Ford F-250 long bed but we do have a way for you to tow a gooseneck trailer. You can start with an above-bed...

I am looking for a hitch for a 75 chev 1 ton dually pickup. I like this BandW hitch but the flages point outward in the picture so the mount would be on the inboard side of the frame. I saw the picture of the hitch mounted on the Ford, and they...

We have an aftermarket bumper on our truck and Im trying to see if this hitch will work with it. What is the clearance from the top of the receiver tube to where it mounts on the frame? Also, what is the horizontal clearance of the mounting...

Hi, I am looking for a little bit of information regarding your axle-less suspension if that is ok. Am I right in thinking the rubber spring also acts as the damper, or do these need additional damping? I see they are rated for weight so can...

is bulb replacable on this light? what is replacement bulb # | Peterson brake/turn signal light # 435800 is sealed and cannot be opened up to change out the bulb. I pulled one from the warehouse to verify this and cannot get the lens off (without...

is this tag light submersible or if not is there a led tag light with bracket that is thanks. | The Optronics LED Trailer License-Plate Light # LPL55CB that you referenced is not a submersible light. We do offer other tag lights with brackets...

I have a 75 camaro built 580 hp 468 bbc motor, bought a 3core champion radiator, what size and cfm do I need without breaking the bank.. | The Derale 26" Dual High-Output, Electric Radiator Fan-and-Shroud Assembly # D16927 would work perfectly...

Hi, I just bought a 2004 Safari motorhome with an 8.1 Chevy engine on a Workhorse chassis. I was wondering if their is a kit to flat tow a 1975 Chevy Blazer behind it. It has locking hubs and a transfer case that has a neutral setting. I want...

Do you know if this would work for a 1975 Chevy Suburban or would I need one with taller side plates? | In order to determine the brackets that may work for the Draw-Tite Ultra Frame Service Body Trailer Hitch Cross Tube - Class V - 2" # 41990...

You show two seat covers in the pictures and the description says front seats. Does this mean the order comes with 2 covers?? | Yes the Bestop Seat Covers for Front "Low Back" Bucket part # B2922515 do come in a quantity of two. You will have...